[Sat Feb 25 13:48:34 2012] Detection parameters:
  Position = (557.9, 891.8) = 20 33 37.40 41 31 12.5
  Extent = 1.1" x 0.6", rotation angle = 134 degrees
  Source counts = 78.2 +/- 9.0
  Background counts = 2.8
  Rate = 0.003 +/- 0.0003

[Sat Feb 25 13:48:40 2012] Off-axis axis estimate = 5.22'
[Sat Feb 25 15:29:18 2012] Using EEF radius (= 1.27 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 15:29:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Feb 25 15:29:18 2012] Initial guess for spatial extent in simple fitting = 1.27"
[Sat Feb 25 15:29:18 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.948
[Sat Feb 25 15:29:18 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 1.27"
[Sat Feb 25 16:21:50 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src2.ximg exists
[Sat Feb 25 16:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src2.csv
[Sat Feb 25 16:21:50 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src2_1.ximg exists
[Sat Feb 25 16:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src2.csv
[Sat Feb 25 16:21:50 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 16:21:50 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sat Feb 25 16:21:50 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Feb 25 16:21:50 2012] Fit fullrun_ccd3_acisf10959_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Feb 25 16:22:11 2012] Spatial fit model total counts = 81.060900, observed total counts = 81.000000
[Sat Feb 25 16:22:11 2012] Offset between fit and detection position for source 1 = 0.838941 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.838941 pixels
  Position = (558.7, 892.1) = 20 33 37.39 41 31 12.4
  Extent = 1.1 (1.0-1.3)", rotation angle = 0
  Source counts = 81.0 +/- 9.0
  Background counts = 0.0
  Rate = 0.003 +/- 0.0003
[Sat Feb 25 16:22:11 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 16:22:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 16:22:11 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 16:22:11 2012] Source does appear to be extended
[Sat Feb 25 16:22:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 17:55:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 17:55:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Feb 25 17:55:54 2012] Initial guess for spatial extent in simple fitting = 1.10"
[Sat Feb 25 17:55:54 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.003
[Sat Feb 25 17:55:54 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 1.10"
[Sat Feb 25 18:44:24 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src2.ximg exists
[Sat Feb 25 18:44:24 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src2.csv
[Sat Feb 25 18:44:24 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src2_1.ximg exists
[Sat Feb 25 18:44:24 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src2.csv
[Sat Feb 25 18:44:24 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 18:44:24 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sat Feb 25 18:44:24 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Feb 25 18:44:24 2012] Fit fullrun_ccd3_acisf10959_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Feb 25 18:44:44 2012] Spatial fit model total counts = 80.719700, observed total counts = 81.000000
[Sat Feb 25 18:44:44 2012] Offset between fit and detection position for source 1 = 0.014051 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.014051 pixels
  Position = (558.8, 892.1) = 20 33 37.39 41 31 12.4
  Extent = 1.1 (1.0-1.2)", rotation angle = 0
  Source counts = 80.5 +/- 9.0
  Background counts = 0.0
  Rate = 0.003 +/- 0.0003
[Sat Feb 25 18:44:44 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 18:44:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 18:44:44 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 18:44:44 2012] Source does appear to be extended
[Sat Feb 25 18:44:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 19:42:31 2012] Writing source region out to fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src1_src.reg
[Sat Feb 25 19:42:31 2012] Extracting stamp from image fullrun_ccd3_acisf10959_pi14-548_cl_sm2.00.img.gz, (508, 841) - (610, 943)
[Sat Feb 25 19:42:31 2012] Writing fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src1.gif
[Sat Feb 25 19:43:11 2012] Size of ../../acisf10959/products/events/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src1_src.evt.gz[events] = 80 counts
[Sat Feb 25 19:43:11 2012] Mean chipx,y = (391.57, 703.60)
[Sat Feb 25 19:43:11 2012] Mean tdetx,y = (4428.40, 3452.57)
[Sat Feb 25 19:43:11 2012] chipx,y range = (375.00-411.00, 686.00-729.00)
[Sat Feb 25 19:43:11 2012] Size of ../../acisf10959/products/events/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 39 counts
[Sat Feb 25 19:43:12 2012] Not generating rmf since there are only 80 counts
[Sat Feb 25 19:43:12 2012] arf not found, will run specextract
[Sat Feb 25 19:43:39 2012] ../../acisf10959/products/spectra/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src1.warf not found
[Sat Feb 25 19:43:39 2012] ../../acisf10959/products/spectra/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src1.wrmf not found
[Sat Feb 25 19:43:39 2012] Removal of ../../acisf10959/products/spectra/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src1.soff failed
[Sat Feb 25 20:15:03 2012] Spectrum 1 has only 80 counts, deleting rmf
[Sat Feb 25 20:15:03 2012] 180.9
[Sat Feb 25 20:15:30 2012] Updating aperture counts using extracted products
[Sat Feb 25 20:15:30 2012] Error reading totcts from fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Feb 25 20:15:31 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 25 20:15:31 2012] Using photon index=1.80, rate=0.00286, arf fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src1.arf
[Sat Feb 25 20:15:31 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 25 20:15:31 2012] Updating source flux to 4.7e-14
[Sat Feb 25 20:16:02 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 25 20:16:03 2012] acisf10959/analysis//spectral/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete