[Sat Feb 25 13:48:32 2012] Detection parameters:
  Position = (504.4, 708.2) = 20 34 20.81 41 33 43.7
  Extent = 1.8" x 1.0", rotation angle = 60 degrees
  Source counts = 11.6 +/- 3.9
  Background counts = 3.4
  Rate = 0.0004 +/- 0.0001

[Sat Feb 25 13:48:33 2012] Off-axis axis estimate = 6.49'
[Sat Feb 25 15:01:19 2012] Using EEF radius (= 1.89 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 15:01:19 2012] Initial guess for spatial extent in simple fitting = 1.89"
[Sat Feb 25 15:01:19 2012] source mask rpix=3.8, npix_max = 75, mask sum = 81, frac = 1.075
[Sat Feb 25 15:01:19 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 1.89"
[Sat Feb 25 15:29:18 2012] fullrun_ccd2_acisf10959_pi14-548_cl_pass0_src19.ximg exists
[Sat Feb 25 15:29:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10959_pi14-548_cl_pass0_src19.csv
[Sat Feb 25 15:29:18 2012] fullrun_ccd2_acisf10959_pi14-548_cl_pass0_src19_1.ximg exists
[Sat Feb 25 15:29:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10959_pi14-548_cl_pass0_src19.csv
[Sat Feb 25 15:29:18 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10959_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10959_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 15:29:18 2012] fullrun_ccd2_acisf10959_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Sat Feb 25 15:29:18 2012] fullrun_ccd2_acisf10959_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Sat Feb 25 15:29:18 2012] Fit fullrun_ccd2_acisf10959_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Sat Feb 25 16:22:05 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 20.504983 pixels away
[Sat Feb 25 16:22:05 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 16:22:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 16:22:05 2012] Assessing source extent using major
[Sat Feb 25 16:22:05 2012] Source does appear to be extended
[Sat Feb 25 16:22:05 2012] Computing asymmetry using major and minor axis, asym = 1.83
[Sat Feb 25 16:22:05 2012] Source is asymmetric
[Sat Feb 25 17:28:54 2012] Using EEF radius (= 1.89 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 17:28:54 2012] Initial guess for spatial extent in simple fitting = 1.89"
[Sat Feb 25 17:28:54 2012] source mask rpix=3.8, npix_max = 75, mask sum = 81, frac = 1.075
[Sat Feb 25 17:28:54 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 1.89"
[Sat Feb 25 17:55:54 2012] fullrun_ccd2_acisf10959_pi14-548_cl_pass1_src19.ximg exists
[Sat Feb 25 17:55:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10959_pi14-548_cl_pass1_src19.csv
[Sat Feb 25 17:55:54 2012] fullrun_ccd2_acisf10959_pi14-548_cl_pass1_src19_1.ximg exists
[Sat Feb 25 17:55:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10959_pi14-548_cl_pass1_src19.csv
[Sat Feb 25 17:55:54 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10959_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10959_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 17:55:54 2012] fullrun_ccd2_acisf10959_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Sat Feb 25 17:55:54 2012] fullrun_ccd2_acisf10959_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Sat Feb 25 17:55:54 2012] Fit fullrun_ccd2_acisf10959_pi14-548_cl_pass1_tfrozen_src19 appears to have run properly
[Sat Feb 25 18:44:38 2012] Spatial fit model total counts = 22.795500, observed total counts = 23.000000
[Sat Feb 25 18:44:38 2012] Offset between fit and detection position for source 30 = 1.778578 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 1.778578 pixels
  Position = (503.0, 709.3) = 20 34 20.89 41 33 44.0
  Extent = 2.9 (1.4-3.6)", rotation angle = 0
  Source counts = 23.5 +/- 4.9
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Sat Feb 25 18:44:38 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 18:44:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 18:44:38 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 18:44:38 2012] Source does appear to be extended
[Sat Feb 25 18:44:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 19:21:16 2012] Writing source region out to fullrun_ccd2_acisf10959_pi14-548_pass1_cl_src30_src.reg
[Sat Feb 25 19:21:16 2012] Extracting stamp from image fullrun_ccd2_acisf10959_pi14-548_cl_sm2.00.img.gz, (371, 577) - (635, 842)
[Sat Feb 25 19:21:16 2012] Writing fullrun_ccd2_acisf10959_pi14-548_pass1_cl_src30.gif
[Sat Feb 25 19:31:56 2012] Size of ../../acisf10959/products/events/fullrun_ccd2_acisf10959_pi14-548_pass1_cl_src30_src.evt.gz[events] = 42 counts
[Sat Feb 25 19:31:56 2012] Mean chipx,y = (447.55, 338.95)
[Sat Feb 25 19:31:56 2012] Mean tdetx,y = (3399.95, 3638.45)
[Sat Feb 25 19:31:56 2012] chipx,y range = (409.00-473.00, 313.00-365.00)
[Sat Feb 25 19:31:56 2012] Size of ../../acisf10959/products/events/fullrun_ccd2_acisf10959_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 206 counts
[Sat Feb 25 19:31:58 2012] Not generating rmf since there are only 23 counts
[Sat Feb 25 19:31:58 2012] arf not found, will run specextract
[Sat Feb 25 19:32:21 2012] ../../acisf10959/products/spectra/fullrun_ccd2_acisf10959_pi14-548_pass1_cl_src30.warf not found
[Sat Feb 25 19:32:21 2012] ../../acisf10959/products/spectra/fullrun_ccd2_acisf10959_pi14-548_pass1_cl_src30.wrmf not found
[Sat Feb 25 19:32:21 2012] Removal of ../../acisf10959/products/spectra/fullrun_ccd2_acisf10959_pi14-548_pass1_cl_src30.soff failed
[Sat Feb 25 19:42:30 2012] Spectrum 30 has only 24 counts, deleting rmf
[Sat Feb 25 19:42:30 2012] 169.29
[Sat Feb 25 20:15:29 2012] Updating aperture counts using extracted products
[Sat Feb 25 20:15:29 2012] Error reading totcts from fullrun_ccd2_acisf10959_pi14-548_pass1_cl_src30_src.pi.gz
[Sat Feb 25 20:15:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 25 20:15:30 2012] Using photon index=1.80, rate=0.000836, arf fullrun_ccd2_acisf10959_pi14-548_pass1_cl_src30.arf
[Sat Feb 25 20:15:30 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 25 20:15:30 2012] Updating source flux to 1.4e-14
[Sat Feb 25 20:15:55 2012] Source 30 has fewer than 100.000000 counts, skipping spectral fitting