[Sat Feb 25 13:48:31 2012] Detection parameters:
  Position = (496.7, 283.3) = 20 34 21.13 41 30 14.7
  Extent = 0.8" x 0.5", rotation angle = 9 degrees
  Source counts = 16.8 +/- 4.2
  Background counts = 1.2
  Rate = 0.0006 +/- 0.0002

[Sat Feb 25 13:48:33 2012] Off-axis axis estimate = 4.21'
[Sat Feb 25 15:01:19 2012] Using EEF radius (= 0.89 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 15:01:19 2012] Initial guess for spatial extent in simple fitting = 0.89"
[Sat Feb 25 15:01:19 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.164
[Sat Feb 25 15:01:19 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 0.89"
[Sat Feb 25 15:29:18 2012] fullrun_ccd2_acisf10959_pi14-548_cl_pass0_src12.ximg exists
[Sat Feb 25 15:29:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10959_pi14-548_cl_pass0_src12.csv
[Sat Feb 25 15:29:18 2012] fullrun_ccd2_acisf10959_pi14-548_cl_pass0_src12_1.ximg exists
[Sat Feb 25 15:29:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10959_pi14-548_cl_pass0_src12.csv
[Sat Feb 25 15:29:18 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10959_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10959_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 15:29:18 2012] fullrun_ccd2_acisf10959_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Sat Feb 25 15:29:18 2012] fullrun_ccd2_acisf10959_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Sat Feb 25 15:29:18 2012] Fit fullrun_ccd2_acisf10959_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Sat Feb 25 16:22:05 2012] Spatial fit model total counts = 18.067400, observed total counts = 19.000000
[Sat Feb 25 16:22:05 2012] Offset between fit and detection position for source 11 = 0.736644 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.736644 pixels
  Position = (497.2, 283.8) = 20 34 21.13 41 30 14.7
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 17.8 +/- 4.2
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Sat Feb 25 16:22:05 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 16:22:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 16:22:05 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 16:22:05 2012] Source does appear to be extended
[Sat Feb 25 16:22:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 17:28:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 17:28:54 2012] Initial guess for spatial extent in simple fitting = 0.92"
[Sat Feb 25 17:28:54 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.114
[Sat Feb 25 17:28:54 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 0.92"
[Sat Feb 25 17:55:54 2012] fullrun_ccd2_acisf10959_pi14-548_cl_pass1_src12.ximg exists
[Sat Feb 25 17:55:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10959_pi14-548_cl_pass1_src12.csv
[Sat Feb 25 17:55:54 2012] fullrun_ccd2_acisf10959_pi14-548_cl_pass1_src12_1.ximg exists
[Sat Feb 25 17:55:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10959_pi14-548_cl_pass1_src12.csv
[Sat Feb 25 17:55:54 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10959_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10959_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 17:55:54 2012] fullrun_ccd2_acisf10959_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Sat Feb 25 17:55:54 2012] fullrun_ccd2_acisf10959_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Sat Feb 25 17:55:54 2012] Fit fullrun_ccd2_acisf10959_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Sat Feb 25 18:44:38 2012] Spatial fit model total counts = 21.390300, observed total counts = 21.000000
[Sat Feb 25 18:44:38 2012] Offset between fit and detection position for source 11 = 0.243744 pixels
[Sat Feb 25 18:44:38 2012] 21.448690 total counts/ 4.932490 bgd. counts: snr = 7.436645
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.243744 pixels
  Position = (497.1, 283.6) = 20 34 21.14 41 30 14.6
  Extent = 0.8 (0.6-1.2)", rotation angle = 0
  Source counts = 16.5 +/- 4.6
  Background counts = 4.9
  Rate = 0.0006 +/- 0.0002
[Sat Feb 25 18:44:38 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 18:44:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 18:44:38 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 18:44:38 2012] Source does appear to be extended
[Sat Feb 25 18:44:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 19:21:16 2012] Writing source region out to fullrun_ccd2_acisf10959_pi14-548_pass1_cl_src11_src.reg
[Sat Feb 25 19:21:16 2012] Extracting stamp from image fullrun_ccd2_acisf10959_pi14-548_cl_sm2.00.img.gz, (461, 247) - (534, 320)
[Sat Feb 25 19:21:16 2012] Writing fullrun_ccd2_acisf10959_pi14-548_pass1_cl_src11.gif
[Sat Feb 25 19:27:42 2012] Size of ../../acisf10959/products/events/fullrun_ccd2_acisf10959_pi14-548_pass1_cl_src11_src.evt.gz[events] = 18 counts
[Sat Feb 25 19:27:42 2012] Mean chipx,y = (66.61, 528.39)
[Sat Feb 25 19:27:42 2012] Mean tdetx,y = (3589.39, 4019.39)
[Sat Feb 25 19:27:42 2012] chipx,y range = (50.00-84.00, 511.00-547.00)
[Sat Feb 25 19:27:42 2012] Size of ../../acisf10959/products/events/fullrun_ccd2_acisf10959_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 17 counts
[Sat Feb 25 19:27:43 2012] Not generating rmf since there are only 16 counts
[Sat Feb 25 19:27:43 2012] arf not found, will run specextract
[Sat Feb 25 19:28:13 2012] ../../acisf10959/products/spectra/fullrun_ccd2_acisf10959_pi14-548_pass1_cl_src11.warf not found
[Sat Feb 25 19:28:13 2012] ../../acisf10959/products/spectra/fullrun_ccd2_acisf10959_pi14-548_pass1_cl_src11.wrmf not found
[Sat Feb 25 19:28:13 2012] Removal of ../../acisf10959/products/spectra/fullrun_ccd2_acisf10959_pi14-548_pass1_cl_src11.soff failed
[Sat Feb 25 19:42:30 2012] Spectrum 11 has only 17 counts, deleting rmf
[Sat Feb 25 19:42:30 2012] 188.891
[Sat Feb 25 20:15:29 2012] Updating aperture counts using extracted products
[Sat Feb 25 20:15:29 2012] Error reading totcts from fullrun_ccd2_acisf10959_pi14-548_pass1_cl_src11_src.pi.gz
[Sat Feb 25 20:15:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 25 20:15:30 2012] Using photon index=1.80, rate=0.000586, arf fullrun_ccd2_acisf10959_pi14-548_pass1_cl_src11.arf
[Sat Feb 25 20:15:30 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 25 20:15:30 2012] Updating source flux to 9.2e-15
[Sat Feb 25 20:15:55 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting