[Sat Feb 25 13:48:25 2012] Detection parameters:
  Position = (1185.4, 629.6) = 20 33 32.11 41 21 22.9
  Extent = 2.5" x 2.1", rotation angle = 103 degrees
  Source counts = 144.3 +/- 13.3
  Background counts = 33.7
  Rate = 0.005 +/- 0.0005

[Sat Feb 25 13:48:29 2012] Off-axis axis estimate = 8.86'
[Sat Feb 25 14:06:43 2012] Using EEF radius (= 3.47 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 14:06:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Feb 25 14:06:43 2012] Initial guess for spatial extent in simple fitting = 3.47"
[Sat Feb 25 14:06:43 2012] source mask rpix=7.1, npix_max = 228, mask sum = 225, frac = 0.985
[Sat Feb 25 14:06:43 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 3.47"
[Sat Feb 25 15:01:19 2012] fullrun_ccd1_acisf10959_pi14-548_cl_pass0_src1.ximg exists
[Sat Feb 25 15:01:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10959_pi14-548_cl_pass0_src1.csv
[Sat Feb 25 15:01:19 2012] fullrun_ccd1_acisf10959_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Feb 25 15:01:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10959_pi14-548_cl_pass0_src1.csv
[Sat Feb 25 15:01:19 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10959_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10959_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 15:01:19 2012] fullrun_ccd1_acisf10959_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Feb 25 15:01:19 2012] fullrun_ccd1_acisf10959_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Feb 25 15:01:19 2012] Fit fullrun_ccd1_acisf10959_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Feb 25 16:22:02 2012] Spatial fit model total counts = 187.000000, observed total counts = 187.000000
[Sat Feb 25 16:22:02 2012] Offset between fit and detection position for source 4 = 1.081808 pixels
[Sat Feb 25 16:22:02 2012] 187.166600 total counts/ 70.940600 bgd. counts: snr = 13.799262
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.081808 pixels
  Position = (1186.4, 629.7) = 20 33 32.09 41 21 22.7
  Extent = 2.3 (1.9-2.7)", rotation angle = 0
  Source counts = 116.2 +/- 13.7
  Background counts = 70.9
  Rate = 0.004 +/- 0.0005
[Sat Feb 25 16:22:02 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 16:22:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 16:22:02 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 16:22:02 2012] Source does appear to be extended
[Sat Feb 25 16:22:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 16:40:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 16:40:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Feb 25 16:40:02 2012] Initial guess for spatial extent in simple fitting = 2.26"
[Sat Feb 25 16:40:02 2012] source mask rpix=4.6, npix_max = 103, mask sum = 110, frac = 1.060
[Sat Feb 25 16:40:02 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 2.26"
[Sat Feb 25 17:28:54 2012] fullrun_ccd1_acisf10959_pi14-548_cl_pass1_src1.ximg exists
[Sat Feb 25 17:28:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10959_pi14-548_cl_pass1_src1.csv
[Sat Feb 25 17:28:54 2012] fullrun_ccd1_acisf10959_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Feb 25 17:28:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10959_pi14-548_cl_pass1_src1.csv
[Sat Feb 25 17:28:54 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10959_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10959_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 17:28:54 2012] fullrun_ccd1_acisf10959_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Feb 25 17:28:54 2012] fullrun_ccd1_acisf10959_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Feb 25 17:28:54 2012] Fit fullrun_ccd1_acisf10959_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Feb 25 18:44:35 2012] Spatial fit model total counts = 157.000000, observed total counts = 157.000000
[Sat Feb 25 18:44:35 2012] Offset between fit and detection position for source 4 = 0.045457 pixels
[Sat Feb 25 18:44:35 2012] 156.849200 total counts/ 52.744200 bgd. counts: snr = 14.334556
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.045457 pixels
  Position = (1186.5, 629.8) = 20 33 32.09 41 21 22.7
  Extent = 2.0 (1.7-2.4)", rotation angle = 0
  Source counts = 104.1 +/- 12.5
  Background counts = 52.7
  Rate = 0.004 +/- 0.0004
[Sat Feb 25 18:44:35 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 18:44:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 18:44:35 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 18:44:35 2012] Source does appear to be extended
[Sat Feb 25 18:44:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 18:59:52 2012] Writing source region out to fullrun_ccd1_acisf10959_pi14-548_pass1_cl_src4_src.reg
[Sat Feb 25 18:59:52 2012] Extracting stamp from image fullrun_ccd1_acisf10959_pi14-548_cl_sm2.00.img.gz, (1094, 537) - (1279, 722)
[Sat Feb 25 18:59:52 2012] Writing fullrun_ccd1_acisf10959_pi14-548_pass1_cl_src4.gif
[Sat Feb 25 18:59:55 2012] Size of ../../acisf10959/products/events/fullrun_ccd1_acisf10959_pi14-548_pass1_cl_src4_src.evt.gz[events] = 140 counts
[Sat Feb 25 18:59:55 2012] Mean chipx,y = (354.77, 45.34)
[Sat Feb 25 18:59:55 2012] Mean tdetx,y = (5086.66, 4461.77)
[Sat Feb 25 18:59:55 2012] chipx,y range = (327.00-382.00, 19.00-72.00)
[Sat Feb 25 18:59:55 2012] Size of ../../acisf10959/products/events/fullrun_ccd1_acisf10959_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 93 counts
[Sat Feb 25 18:59:56 2012] rmf not found, will run specextract
[Sat Feb 25 18:59:56 2012] arf not found, will run specextract
[Sat Feb 25 19:00:04 2012] ../../acisf10959/products/spectra/fullrun_ccd1_acisf10959_pi14-548_pass1_cl_src4.warf not found
[Sat Feb 25 19:00:04 2012] ../../acisf10959/products/spectra/fullrun_ccd1_acisf10959_pi14-548_pass1_cl_src4.wrmf not found
[Sat Feb 25 19:00:04 2012] Removal of ../../acisf10959/products/spectra/fullrun_ccd1_acisf10959_pi14-548_pass1_cl_src4.soff failed
[Sat Feb 25 19:21:15 2012] Keeping rmf generated by specextract
[Sat Feb 25 19:21:15 2012] 170.263
[Sat Feb 25 20:15:28 2012] Updating aperture counts using extracted products
[Sat Feb 25 20:15:28 2012] Error reading totcts from fullrun_ccd1_acisf10959_pi14-548_pass1_cl_src4_src.pi.gz
[Sat Feb 25 20:15:29 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 25 20:15:29 2012] Using photon index=1.80, rate=0.00369, arf fullrun_ccd1_acisf10959_pi14-548_pass1_cl_src4.arf
[Sat Feb 25 20:15:29 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 25 20:15:29 2012] Updating source flux to 6.3e-14
[Sat Feb 25 20:15:55 2012] Reading fit data from acisf10959/analysis//spectral/fullrun_ccd1_acisf10959_pi14-548_pass1_cl_src4_pl.csv
[Sat Feb 25 20:15:55 2012] Spectral fit parameter nH value = 1.3869e+22
[Sat Feb 25 20:15:55 2012] Spectral fit parameter PhoIndex value = 2.54002
[Sat Feb 25 20:15:55 2012] Failed to get F(0.3-8.0) from acisf10959/analysis//spectral/fullrun_ccd1_acisf10959_pi14-548_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Sat Feb 25 20:15:55 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 25 20:15:55 2012] Using Nh = 1.4e+22, photon index=2.54, rate=0.00369, arf fullrun_ccd1_acisf10959_pi14-548_pass1_cl_src4.arf
[Sat Feb 25 20:15:55 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 25 20:15:55 2012] Updating source flux to 5.1e-14