[Sat Oct 29 11:12:21 2011] Detection parameters:
  Position = (447.8, 632.1) = 20 32 27.22 41 21 56.3
  Extent = 0.7" x 0.5", rotation angle = 111 degrees
  Source counts = 14.0 +/- 3.9
  Background counts = 1.0
  Rate = 0.0005 +/- 0.0001

[Sat Oct 29 11:12:26 2011] Off-axis axis estimate = 3.47'
[Sat Oct 29 11:14:03 2011] Using EEF radius (= 0.68 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 11:14:03 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Sat Oct 29 11:14:03 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.120
[Sat Oct 29 11:14:03 2011] Giving source the simple spatial ID 45 for pass 0, mean size = 0.68"
[Sat Oct 29 11:14:08 2011] fullrun_ccd3_acisf10958_pi14-548_cl_pass0_src45.ximg exists
[Sat Oct 29 11:14:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10958_pi14-548_cl_pass0_src45.csv
[Sat Oct 29 11:14:08 2011] fullrun_ccd3_acisf10958_pi14-548_cl_pass0_src45_1.ximg exists
[Sat Oct 29 11:14:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10958_pi14-548_cl_pass0_src45.csv
[Sat Oct 29 11:14:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10958_pi14-548_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10958_pi14-548_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 11:14:09 2011] fullrun_ccd3_acisf10958_pi14-548_cl_pass0_tfrozen_src45.ximg exists
[Sat Oct 29 11:14:09 2011] fullrun_ccd3_acisf10958_pi14-548_cl_pass0_tfrozen_src45_1.ximg exists
[Sat Oct 29 11:14:09 2011] Fit fullrun_ccd3_acisf10958_pi14-548_cl_pass0_tfrozen_src45 appears to have run properly
[Sat Oct 29 11:14:44 2011] Spatial fit model total counts = 16.671600, observed total counts = 17.000000
[Sat Oct 29 11:14:44 2011] Offset between fit and detection position for source 22 = 1.360031 pixels
[Sat Oct 29 11:14:44 2011] 15.994980 total counts/ 4.429980 bgd. counts: snr = 5.494710
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 1.360031 pixels
  Position = (448.0, 633.5) = 20 32 27.23 41 21 56.8
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 11.6 +/- 4.0
  Background counts = 4.4
  Rate = 0.0004 +/- 0.0001
[Sat Oct 29 11:14:45 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 11:14:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 11:14:45 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 11:14:45 2011] Source does appear to be extended
[Sat Oct 29 11:14:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 11:15:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 11:15:26 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Sat Oct 29 11:15:26 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.005
[Sat Oct 29 11:15:26 2011] Giving source the simple spatial ID 45 for pass 1, mean size = 0.49"
[Sat Oct 29 11:15:28 2011] fullrun_ccd3_acisf10958_pi14-548_cl_pass1_src45.ximg exists
[Sat Oct 29 11:15:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10958_pi14-548_cl_pass1_src45.csv
[Sat Oct 29 11:15:28 2011] fullrun_ccd3_acisf10958_pi14-548_cl_pass1_src45_1.ximg exists
[Sat Oct 29 11:15:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10958_pi14-548_cl_pass1_src45.csv
[Sat Oct 29 11:15:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10958_pi14-548_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10958_pi14-548_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 11:15:29 2011] fullrun_ccd3_acisf10958_pi14-548_cl_pass1_tfrozen_src45.ximg exists
[Sat Oct 29 11:15:29 2011] fullrun_ccd3_acisf10958_pi14-548_cl_pass1_tfrozen_src45_1.ximg exists
[Sat Oct 29 11:15:29 2011] Fit fullrun_ccd3_acisf10958_pi14-548_cl_pass1_tfrozen_src45 appears to have run properly
[Sat Oct 29 11:16:03 2011] Spatial fit model total counts = 17.952400, observed total counts = 18.000000
[Sat Oct 29 11:16:03 2011] Offset between fit and detection position for source 22 = 0.022146 pixels
[Sat Oct 29 11:16:03 2011] 17.442760 total counts/ 6.093760 bgd. counts: snr = 4.597428
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.022146 pixels
  Position = (448.0, 633.5) = 20 32 27.23 41 21 56.8
  Extent = 0.5 (0.3-0.8)", rotation angle = 0
  Source counts = 11.3 +/- 4.2
  Background counts = 6.1
  Rate = 0.0004 +/- 0.0001
[Sat Oct 29 11:16:03 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 11:16:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 11:16:03 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 11:16:03 2011] Source does appear to be extended
[Sat Oct 29 11:16:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 11:25:06 2011] Not overwriting source region fullrun_ccd3_acisf10958_pi14-548_pass1_cl_src22_src.reg
[Sat Oct 29 11:25:06 2011] Extracting stamp from image fullrun_ccd3_acisf10958_pi14-548_cl_sm2.00.img.gz, (426, 611) - (470, 656)
[Sat Oct 29 11:25:06 2011] Writing fullrun_ccd3_acisf10958_pi14-548_pass1_cl_src22.gif
[Sat Oct 29 11:27:12 2011] ../../acisf10958/products/events/fullrun_ccd3_acisf10958_pi14-548_pass1_cl_src22_src.evt and ../../acisf10958/products/events/fullrun_ccd3_acisf10958_pi14-548_pass1_cl_src22_bgd.evt exist, delete to re-create
[Sat Oct 29 11:27:12 2011] Size of ../../acisf10958/products/events/fullrun_ccd3_acisf10958_pi14-548_pass1_cl_src22_src.evt.gz[events] = 13 counts
[Sat Oct 29 11:27:12 2011] Mean chipx,y = (661.31, 708.08)
[Sat Oct 29 11:27:12 2011] Mean tdetx,y = (4423.92, 3722.31)
[Sat Oct 29 11:27:12 2011] chipx,y range = (648.00-679.00, 694.00-726.00)
[Sat Oct 29 11:27:12 2011] Size of ../../acisf10958/products/events/fullrun_ccd3_acisf10958_pi14-548_pass1_cl_src22_bgd.evt.gz[events] = 8 counts
[Sat Oct 29 11:27:12 2011] ../../acisf10958/products/images/fullrun_ccd3_acisf10958_pi14-548_pass1_cl_src22_src.img and ../../acisf10958/products/images/fullrun_ccd3_acisf10958_pi14-548_pass1_cl_src22_bgd.img exist, delete to re-create
[Sat Oct 29 11:27:12 2011] ../../acisf10958/products/spectra/fullrun_ccd3_acisf10958_pi14-548_pass1_cl_src22_src.pi and ../../acisf10958/products/spectra/fullrun_ccd3_acisf10958_pi14-548_pass1_cl_src22_bgd.pi exist, delete to re-create
[Sat Oct 29 11:27:12 2011] Not generating rmf since there are only 11 counts
[Sat Oct 29 11:27:14 2011] ../../acisf10958/products/lightcurves/fullrun_ccd3_acisf10958_pi14-548_pass1_cl_src22_src.lc and ../../acisf10958/products/lightcurves/fullrun_ccd3_acisf10958_pi14-548_pass1_cl_src22_bgd.lc exist, delete to re-create
[Sat Oct 29 11:28:04 2011] 192.22
[Sat Oct 29 11:28:17 2011] Updating aperture counts using extracted products
[Sat Oct 29 11:28:17 2011] Error reading totcts from fullrun_ccd3_acisf10958_pi14-548_pass1_cl_src22_src.pi.gz
[Sat Oct 29 11:28:17 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 11:28:17 2011] Using photon index=1.80, rate=0.000392, arf fullrun_ccd3_acisf10958_pi14-548_pass1_cl_src22.arf
[Sat Oct 29 11:28:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 11:28:17 2011] Updating source flux to 6.2e-15
[Sat Oct 29 11:28:57 2011] Source 22 has fewer than 100.000000 counts, skipping spectral fitting