[Sat Oct 29 11:12:16 2011] Detection parameters:
  Position = (605.6, 560.0) = 20 33 0.02 41 25 8.7
  Extent = 0.7" x 0.5", rotation angle = 118 degrees
  Source counts = 14.9 +/- 4.0
  Background counts = 1.1
  Rate = 0.0005 +/- 0.0001

[Sat Oct 29 11:12:19 2011] Off-axis axis estimate = 4.92'
[Sat Oct 29 11:14:00 2011] Using EEF radius (= 1.15 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 11:14:00 2011] Initial guess for spatial extent in simple fitting = 1.15"
[Sat Oct 29 11:14:00 2011] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.934
[Sat Oct 29 11:14:00 2011] Giving source the simple spatial ID 36 for pass 0, mean size = 1.15"
[Sat Oct 29 11:14:02 2011] fullrun_ccd2_acisf10958_pi14-548_cl_pass0_src36.ximg exists
[Sat Oct 29 11:14:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10958_pi14-548_cl_pass0_src36.csv
[Sat Oct 29 11:14:02 2011] fullrun_ccd2_acisf10958_pi14-548_cl_pass0_src36_1.ximg exists
[Sat Oct 29 11:14:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10958_pi14-548_cl_pass0_src36.csv
[Sat Oct 29 11:14:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10958_pi14-548_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10958_pi14-548_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 11:14:03 2011] fullrun_ccd2_acisf10958_pi14-548_cl_pass0_tfrozen_src36.ximg exists
[Sat Oct 29 11:14:03 2011] fullrun_ccd2_acisf10958_pi14-548_cl_pass0_tfrozen_src36_1.ximg exists
[Sat Oct 29 11:14:03 2011] Fit fullrun_ccd2_acisf10958_pi14-548_cl_pass0_tfrozen_src36 appears to have run properly
[Sat Oct 29 11:14:37 2011] Spatial fit model total counts = 23.532000, observed total counts = 24.000000
[Sat Oct 29 11:14:37 2011] Offset between fit and detection position for source 37 = 1.001977 pixels
[Sat Oct 29 11:14:37 2011] 23.582500 total counts/ 0.000000 bgd. counts: snr = 489622946263075.562500
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 1.001977 pixels
  Position = (604.6, 560.3) = 20 33 0.08 41 25 8.6
  Extent = 1.1 (0.9-1.3)", rotation angle = 0
  Source counts = 23.6 +/- 4.9
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Sat Oct 29 11:14:38 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 11:14:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 11:14:38 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 11:14:38 2011] Source does appear to be extended
[Sat Oct 29 11:14:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 11:15:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 11:15:23 2011] Initial guess for spatial extent in simple fitting = 1.12"
[Sat Oct 29 11:15:23 2011] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.979
[Sat Oct 29 11:15:23 2011] Giving source the simple spatial ID 35 for pass 1, mean size = 1.12"
[Sat Oct 29 11:15:25 2011] fullrun_ccd2_acisf10958_pi14-548_cl_pass1_src35.ximg exists
[Sat Oct 29 11:15:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10958_pi14-548_cl_pass1_src35.csv
[Sat Oct 29 11:15:25 2011] fullrun_ccd2_acisf10958_pi14-548_cl_pass1_src35_1.ximg exists
[Sat Oct 29 11:15:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10958_pi14-548_cl_pass1_src35.csv
[Sat Oct 29 11:15:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10958_pi14-548_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10958_pi14-548_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 11:15:26 2011] fullrun_ccd2_acisf10958_pi14-548_cl_pass1_tfrozen_src35.ximg exists
[Sat Oct 29 11:15:26 2011] fullrun_ccd2_acisf10958_pi14-548_cl_pass1_tfrozen_src35_1.ximg exists
[Sat Oct 29 11:15:26 2011] Fit fullrun_ccd2_acisf10958_pi14-548_cl_pass1_tfrozen_src35 appears to have run properly
[Sat Oct 29 11:15:56 2011] Spatial fit model total counts = 25.558800, observed total counts = 26.000000
[Sat Oct 29 11:15:56 2011] Offset between fit and detection position for source 37 = 0.262300 pixels
[Sat Oct 29 11:15:56 2011] 24.896570 total counts/ 3.141070 bgd. counts: snr = 12.275248
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 0.262300 pixels
  Position = (604.8, 560.3) = 20 33 0.07 41 25 8.6
  Extent = 1.1 (0.8-1.3)", rotation angle = 0
  Source counts = 21.8 +/- 5.0
  Background counts = 3.1
  Rate = 0.0008 +/- 0.0002
[Sat Oct 29 11:15:56 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 11:15:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 11:15:56 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 11:15:56 2011] Source does appear to be extended
[Sat Oct 29 11:15:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 11:21:40 2011] Not overwriting source region fullrun_ccd2_acisf10958_pi14-548_pass1_cl_src37_src.reg
[Sat Oct 29 11:21:40 2011] Extracting stamp from image fullrun_ccd2_acisf10958_pi14-548_cl_sm2.00.img.gz, (555, 511) - (654, 610)
[Sat Oct 29 11:21:40 2011] Writing fullrun_ccd2_acisf10958_pi14-548_pass1_cl_src37.gif
[Sat Oct 29 11:23:19 2011] ../../acisf10958/products/events/fullrun_ccd2_acisf10958_pi14-548_pass1_cl_src37_src.evt and ../../acisf10958/products/events/fullrun_ccd2_acisf10958_pi14-548_pass1_cl_src37_bgd.evt exist, delete to re-create
[Sat Oct 29 11:23:19 2011] Size of ../../acisf10958/products/events/fullrun_ccd2_acisf10958_pi14-548_pass1_cl_src37_src.evt.gz[events] = 27 counts
[Sat Oct 29 11:23:19 2011] Mean chipx,y = (358.78, 515.67)
[Sat Oct 29 11:23:19 2011] Mean tdetx,y = (3576.67, 3727.22)
[Sat Oct 29 11:23:19 2011] chipx,y range = (344.00-378.00, 494.00-536.00)
[Sat Oct 29 11:23:19 2011] Size of ../../acisf10958/products/events/fullrun_ccd2_acisf10958_pi14-548_pass1_cl_src37_bgd.evt.gz[events] = 33 counts
[Sat Oct 29 11:23:19 2011] ../../acisf10958/products/images/fullrun_ccd2_acisf10958_pi14-548_pass1_cl_src37_src.img and ../../acisf10958/products/images/fullrun_ccd2_acisf10958_pi14-548_pass1_cl_src37_bgd.img exist, delete to re-create
[Sat Oct 29 11:23:19 2011] ../../acisf10958/products/spectra/fullrun_ccd2_acisf10958_pi14-548_pass1_cl_src37_src.pi and ../../acisf10958/products/spectra/fullrun_ccd2_acisf10958_pi14-548_pass1_cl_src37_bgd.pi exist, delete to re-create
[Sat Oct 29 11:23:19 2011] Not generating rmf since there are only 21 counts
[Sat Oct 29 11:23:22 2011] ../../acisf10958/products/lightcurves/fullrun_ccd2_acisf10958_pi14-548_pass1_cl_src37_src.lc and ../../acisf10958/products/lightcurves/fullrun_ccd2_acisf10958_pi14-548_pass1_cl_src37_bgd.lc exist, delete to re-create
[Sat Oct 29 11:25:04 2011] 182.519
[Sat Oct 29 11:28:15 2011] Updating aperture counts using extracted products
[Sat Oct 29 11:28:15 2011] Error reading totcts from fullrun_ccd2_acisf10958_pi14-548_pass1_cl_src37_src.pi.gz
[Sat Oct 29 11:28:16 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 11:28:16 2011] Using photon index=1.80, rate=0.000751, arf fullrun_ccd2_acisf10958_pi14-548_pass1_cl_src37.arf
[Sat Oct 29 11:28:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 11:28:16 2011] Updating source flux to 1.2e-14
[Sat Oct 29 11:28:53 2011] Source 37 has fewer than 100.000000 counts, skipping spectral fitting