[Sat Oct 29 11:12:09 2011] Detection parameters:
  Position = (992.0, 907.4) = 20 32 24.70 41 16 29.8
  Extent = 1.6" x 0.8", rotation angle = 81 degrees
  Source counts = 39.8 +/- 6.7
  Background counts = 5.2
  Rate = 0.001 +/- 0.0002

[Sat Oct 29 11:12:13 2011] Off-axis axis estimate = 5.99'
[Sat Oct 29 11:13:58 2011] Using EEF radius (= 1.62 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 11:13:58 2011] Initial guess for spatial extent in simple fitting = 1.62"
[Sat Oct 29 11:13:58 2011] source mask rpix=3.3, npix_max = 57, mask sum = 56, frac = 0.969
[Sat Oct 29 11:13:58 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 1.62"
[Sat Oct 29 11:13:59 2011] fullrun_ccd1_acisf10958_pi14-548_cl_pass0_src11.ximg exists
[Sat Oct 29 11:13:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10958_pi14-548_cl_pass0_src11.csv
[Sat Oct 29 11:13:59 2011] fullrun_ccd1_acisf10958_pi14-548_cl_pass0_src11_1.ximg exists
[Sat Oct 29 11:13:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10958_pi14-548_cl_pass0_src11.csv
[Sat Oct 29 11:13:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10958_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10958_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 11:14:00 2011] fullrun_ccd1_acisf10958_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Sat Oct 29 11:14:00 2011] fullrun_ccd1_acisf10958_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Oct 29 11:14:00 2011] Fit fullrun_ccd1_acisf10958_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Oct 29 11:14:32 2011] Spatial fit model total counts = 43.238400, observed total counts = 43.000000
[Sat Oct 29 11:14:32 2011] Offset between fit and detection position for source 5 = 0.727617 pixels
[Sat Oct 29 11:14:32 2011] 43.144500 total counts/ 15.454800 bgd. counts: snr = 7.043468
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.727617 pixels
  Position = (992.7, 907.7) = 20 32 24.70 41 16 29.7
  Extent = 0.8 (0.6-1.1)", rotation angle = 0
  Source counts = 27.7 +/- 6.6
  Background counts = 15.5
  Rate = 0.001 +/- 0.0002
[Sat Oct 29 11:14:32 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 11:14:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 11:14:32 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 11:14:32 2011] Source does appear to be extended
[Sat Oct 29 11:14:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 11:15:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 11:15:21 2011] Initial guess for spatial extent in simple fitting = 0.78"
[Sat Oct 29 11:15:21 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.918
[Sat Oct 29 11:15:21 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.78"
[Sat Oct 29 11:15:22 2011] fullrun_ccd1_acisf10958_pi14-548_cl_pass1_src11.ximg exists
[Sat Oct 29 11:15:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10958_pi14-548_cl_pass1_src11.csv
[Sat Oct 29 11:15:22 2011] fullrun_ccd1_acisf10958_pi14-548_cl_pass1_src11_1.ximg exists
[Sat Oct 29 11:15:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10958_pi14-548_cl_pass1_src11.csv
[Sat Oct 29 11:15:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10958_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10958_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 11:15:23 2011] fullrun_ccd1_acisf10958_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Sat Oct 29 11:15:23 2011] fullrun_ccd1_acisf10958_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Oct 29 11:15:23 2011] Fit fullrun_ccd1_acisf10958_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Oct 29 11:15:50 2011] Spatial fit model total counts = 46.393100, observed total counts = 41.000000
[Sat Oct 29 11:15:50 2011] Offset between fit and detection position for source 5 = 0.054796 pixels
[Sat Oct 29 11:15:50 2011] 45.848210 total counts/ 5.946410 bgd. counts: snr = 16.363080
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.054796 pixels
  Position = (992.7, 907.8) = 20 32 24.69 41 16 29.7
  Extent = 1.5" x 0.8", rotation angle = 82
  Source counts = 39.9 +/- 6.8
  Background counts = 5.9
  Rate = 0.001 +/- 0.0002
[Sat Oct 29 11:15:50 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 11:15:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 11:15:50 2011] Assessing source extent using major
[Sat Oct 29 11:15:50 2011] Source does appear to be extended
[Sat Oct 29 11:15:50 2011] Computing asymmetry using major and minor axis, asym = 1.98
[Sat Oct 29 11:15:50 2011] Source is asymmetric
[Sat Oct 29 11:19:49 2011] Not overwriting source region fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src5_src.reg
[Sat Oct 29 11:19:49 2011] Extracting stamp from image fullrun_ccd1_acisf10958_pi14-548_cl_sm2.00.img.gz, (924, 839) - (1061, 976)
[Sat Oct 29 11:19:49 2011] Writing fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src5.gif
[Sat Oct 29 11:20:19 2011] ../../acisf10958/products/events/fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src5_src.evt and ../../acisf10958/products/events/fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Sat Oct 29 11:20:19 2011] Size of ../../acisf10958/products/events/fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src5_src.evt.gz[events] = 41 counts
[Sat Oct 29 11:20:19 2011] Mean chipx,y = (180.76, 348.27)
[Sat Oct 29 11:20:19 2011] Mean tdetx,y = (4783.73, 4287.76)
[Sat Oct 29 11:20:19 2011] chipx,y range = (165.00-199.00, 334.00-369.00)
[Sat Oct 29 11:20:19 2011] Size of ../../acisf10958/products/events/fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 62 counts
[Sat Oct 29 11:20:19 2011] ../../acisf10958/products/images/fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src5_src.img and ../../acisf10958/products/images/fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Sat Oct 29 11:20:19 2011] ../../acisf10958/products/spectra/fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src5_src.pi and ../../acisf10958/products/spectra/fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Sat Oct 29 11:20:19 2011] Not generating rmf since there are only 39 counts
[Sat Oct 29 11:20:21 2011] ../../acisf10958/products/lightcurves/fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src5_src.lc and ../../acisf10958/products/lightcurves/fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Sat Oct 29 11:21:39 2011] 182.058
[Sat Oct 29 11:28:14 2011] Updating aperture counts using extracted products
[Sat Oct 29 11:28:14 2011] Error reading totcts from fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src5_src.pi.gz
[Sat Oct 29 11:28:14 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 11:28:14 2011] Using photon index=1.80, rate=0.00138, arf fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src5.arf
[Sat Oct 29 11:28:14 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 11:28:14 2011] Updating source flux to 2.3e-14
[Sat Oct 29 11:28:38 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting