[Sat Oct 29 11:12:09 2011] Detection parameters:
  Position = (619.5, 662.5) = 20 32 40.96 41 14 29.4
  Extent = 1.7" x 1.1", rotation angle = 67 degrees
  Source counts = 4490.4 +/- 68.1
  Background counts = 151.6
  Rate = 0.2 +/- 0.002

[Sat Oct 29 11:12:13 2011] Off-axis axis estimate = 6.65'
[Sat Oct 29 11:13:58 2011] Using EEF radius (= 1.98 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 11:13:58 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 29 11:13:58 2011] Initial guess for spatial extent in simple fitting = 1.98"
[Sat Oct 29 11:13:58 2011] source mask rpix=4.0, npix_max = 81, mask sum = 81, frac = 0.992
[Sat Oct 29 11:13:58 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.98"
[Sat Oct 29 11:13:59 2011] fullrun_ccd1_acisf10958_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 29 11:13:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10958_pi14-548_cl_pass0_src1.csv
[Sat Oct 29 11:13:59 2011] fullrun_ccd1_acisf10958_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 29 11:13:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10958_pi14-548_cl_pass0_src1.csv
[Sat Oct 29 11:13:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10958_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10958_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 11:13:59 2011] fullrun_ccd1_acisf10958_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 29 11:13:59 2011] fullrun_ccd1_acisf10958_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 29 11:13:59 2011] Fit fullrun_ccd1_acisf10958_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 29 11:14:32 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 23.436460 pixels away
[Sat Oct 29 11:14:32 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 11:14:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 11:14:32 2011] Assessing source extent using major
[Sat Oct 29 11:14:32 2011] Source does appear to be extended
[Sat Oct 29 11:14:32 2011] Computing asymmetry using major and minor axis, asym = 1.52
[Sat Oct 29 11:14:32 2011] Source is asymmetric
[Sat Oct 29 11:15:21 2011] Using EEF radius (= 1.98 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 11:15:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 29 11:15:21 2011] Initial guess for spatial extent in simple fitting = 1.98"
[Sat Oct 29 11:15:21 2011] source mask rpix=4.0, npix_max = 81, mask sum = 81, frac = 0.992
[Sat Oct 29 11:15:21 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.98"
[Sat Oct 29 11:15:22 2011] fullrun_ccd1_acisf10958_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 29 11:15:22 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf10958_pi14-548_cl_pass1_src1.csv
[Sat Oct 29 11:15:22 2011] fullrun_ccd1_acisf10958_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 29 11:15:22 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf10958_pi14-548_cl_pass1_src1.csv
[Sat Oct 29 11:15:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10958_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10958_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 11:15:22 2011] fullrun_ccd1_acisf10958_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 29 11:15:23 2011] fullrun_ccd1_acisf10958_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 29 11:15:23 2011] Fit fullrun_ccd1_acisf10958_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 29 11:15:50 2011] Spatial fit model total counts = 4675.780000, observed total counts = 4683.000000
[Sat Oct 29 11:15:50 2011] Offset between fit and detection position for source 1 = 0.770734 pixels
[Sat Oct 29 11:15:50 2011] 4677.096000 total counts/ 285.636000 bgd. counts: snr = 259.837877
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.770734 pixels
  Position = (620.0, 663.1) = 20 32 40.96 41 14 29.4
  Extent = 1.7 (1.7-1.7)", rotation angle = 0
  Source counts = 4391.5 +/- 68.4
  Background counts = 285.6
  Rate = 0.2 +/- 0.002
[Sat Oct 29 11:15:50 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 11:15:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 11:15:50 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 11:15:50 2011] Source does appear to be extended
[Sat Oct 29 11:15:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 11:19:49 2011] Not overwriting source region fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src1_src.reg
[Sat Oct 29 11:19:49 2011] Extracting stamp from image fullrun_ccd1_acisf10958_pi14-548_cl_sm2.00.img.gz, (542, 585) - (698, 741)
[Sat Oct 29 11:19:49 2011] Writing fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src1.gif
[Sat Oct 29 11:19:51 2011] ../../acisf10958/products/events/fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src1_src.evt and ../../acisf10958/products/events/fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct 29 11:19:51 2011] Size of ../../acisf10958/products/events/fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src1_src.evt.gz[events] = 4613 counts
[Sat Oct 29 11:19:51 2011] Mean chipx,y = (571.78, 568.08)
[Sat Oct 29 11:19:51 2011] Mean tdetx,y = (4563.92, 4678.78)
[Sat Oct 29 11:19:51 2011] chipx,y range = (543.00-601.00, 539.00-596.00)
[Sat Oct 29 11:19:51 2011] Size of ../../acisf10958/products/events/fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 394 counts
[Sat Oct 29 11:19:51 2011] ../../acisf10958/products/images/fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src1_src.img and ../../acisf10958/products/images/fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct 29 11:19:51 2011] ../../acisf10958/products/spectra/fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src1_src.pi and ../../acisf10958/products/spectra/fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Oct 29 11:19:53 2011] ../../acisf10958/products/lightcurves/fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src1_src.lc and ../../acisf10958/products/lightcurves/fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct 29 11:21:38 2011] Keeping rmf generated by specextract
[Sat Oct 29 11:21:38 2011] 170.913
[Sat Oct 29 11:28:14 2011] Updating aperture counts using extracted products
[Sat Oct 29 11:28:14 2011] Error reading totcts from fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Oct 29 11:28:14 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 11:28:14 2011] Using photon index=1.80, rate=0.152, arf fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src1.arf
[Sat Oct 29 11:28:14 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 11:28:14 2011] Updating source flux to 2.7e-12
[Sat Oct 29 11:28:53 2011] Reading fit data from acisf10958/analysis//spectral/fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src1_pl.csv
[Sat Oct 29 11:28:53 2011] Spectral fit parameter nH value = 1.82006e+22
[Sat Oct 29 11:28:53 2011] Spectral fit parameter PhoIndex value = 3.70496
[Sat Oct 29 11:28:53 2011] Failed to get F(0.3-8.0) from acisf10958/analysis//spectral/fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Oct 29 11:28:53 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 11:28:53 2011] Using Nh = 1.8e+22, photon index=3.70, rate=0.152, arf fullrun_ccd1_acisf10958_pi14-548_pass1_cl_src1.arf
[Sat Oct 29 11:28:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 11:28:53 2011] Updating source flux to 1.6e-12