[Sat Oct 29 11:12:07 2011] Detection parameters:
  Position = (418.5, 869.4) = 20 33 29.58 41 20 6.8
  Extent = 3.0" x 2.8", rotation angle = 25 degrees
  Source counts = 30.5 +/- 7.0
  Background counts = 18.5
  Rate = 0.001 +/- 0.0002

[Sat Oct 29 11:12:09 2011] Off-axis axis estimate = 8.40'
[Sat Oct 29 11:13:54 2011] Using EEF radius (= 3.12 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 11:13:54 2011] Initial guess for spatial extent in simple fitting = 3.12"
[Sat Oct 29 11:13:54 2011] source mask rpix=6.3, npix_max = 187, mask sum = 169, frac = 0.904
[Sat Oct 29 11:13:54 2011] Giving source the simple spatial ID 56 for pass 0, mean size = 3.12"
[Sat Oct 29 11:13:56 2011] fullrun_ccd0_acisf10958_pi14-548_cl_pass0_src56.ximg exists
[Sat Oct 29 11:13:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10958_pi14-548_cl_pass0_src56.csv
[Sat Oct 29 11:13:56 2011] fullrun_ccd0_acisf10958_pi14-548_cl_pass0_src56_1.ximg exists
[Sat Oct 29 11:13:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10958_pi14-548_cl_pass0_src56.csv
[Sat Oct 29 11:13:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10958_pi14-548_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10958_pi14-548_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 11:13:57 2011] fullrun_ccd0_acisf10958_pi14-548_cl_pass0_tfrozen_src56.ximg exists
[Sat Oct 29 11:13:58 2011] fullrun_ccd0_acisf10958_pi14-548_cl_pass0_tfrozen_src56_1.ximg exists
[Sat Oct 29 11:13:58 2011] Fit fullrun_ccd0_acisf10958_pi14-548_cl_pass0_tfrozen_src56 appears to have run properly
[Sat Oct 29 11:14:27 2011] Spatial fit model total counts = 79.134000, observed total counts = 79.000000
[Sat Oct 29 11:14:27 2011] Offset between fit and detection position for source 72 = 1.782512 pixels
[Sat Oct 29 11:14:27 2011] 79.776500 total counts/ 53.069800 bgd. counts: snr = 3.666034
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 1.782512 pixels
  Position = (420.2, 869.9) = 20 33 29.52 41 20 6.8
  Extent = 2.8 (1.6-5.3)", rotation angle = 0
  Source counts = 26.7 +/- 8.9
  Background counts = 53.1
  Rate = 0.0009 +/- 0.0003
[Sat Oct 29 11:14:27 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 11:14:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 11:14:27 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 11:14:27 2011] Source does appear to be extended
[Sat Oct 29 11:14:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 11:15:17 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 11:15:17 2011] Initial guess for spatial extent in simple fitting = 2.79"
[Sat Oct 29 11:15:17 2011] source mask rpix=5.7, npix_max = 151, mask sum = 144, frac = 0.948
[Sat Oct 29 11:15:17 2011] Giving source the simple spatial ID 55 for pass 1, mean size = 2.79"
[Sat Oct 29 11:15:19 2011] fullrun_ccd0_acisf10958_pi14-548_cl_pass1_src55.ximg exists
[Sat Oct 29 11:15:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10958_pi14-548_cl_pass1_src55.csv
[Sat Oct 29 11:15:19 2011] fullrun_ccd0_acisf10958_pi14-548_cl_pass1_src55_1.ximg exists
[Sat Oct 29 11:15:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10958_pi14-548_cl_pass1_src55.csv
[Sat Oct 29 11:15:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10958_pi14-548_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10958_pi14-548_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 11:15:20 2011] fullrun_ccd0_acisf10958_pi14-548_cl_pass1_tfrozen_src55.ximg exists
[Sat Oct 29 11:15:20 2011] fullrun_ccd0_acisf10958_pi14-548_cl_pass1_tfrozen_src55_1.ximg exists
[Sat Oct 29 11:15:20 2011] Fit fullrun_ccd0_acisf10958_pi14-548_cl_pass1_tfrozen_src55 appears to have run properly
[Sat Oct 29 11:15:46 2011] Spatial fit model total counts = 67.158200, observed total counts = 67.000000
[Sat Oct 29 11:15:46 2011] Offset between fit and detection position for source 72 = 0.469064 pixels
[Sat Oct 29 11:15:46 2011] 67.475500 total counts/ 39.761800 bgd. counts: snr = 4.395026
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 0.469064 pixels
  Position = (420.1, 870.4) = 20 33 29.53 41 20 7.0
  Extent = 2.8 (1.7-5.2)", rotation angle = 0
  Source counts = 27.7 +/- 8.2
  Background counts = 39.8
  Rate = 0.001 +/- 0.0003
[Sat Oct 29 11:15:46 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 11:15:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 11:15:46 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 11:15:46 2011] Source does appear to be extended
[Sat Oct 29 11:15:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 11:16:36 2011] Not overwriting source region fullrun_ccd0_acisf10958_pi14-548_pass1_cl_src72_src.reg
[Sat Oct 29 11:16:36 2011] Extracting stamp from image fullrun_ccd0_acisf10958_pi14-548_cl_sm2.00.img.gz, (290, 740) - (550, 1000)
[Sat Oct 29 11:16:36 2011] Writing fullrun_ccd0_acisf10958_pi14-548_pass1_cl_src72.gif
[Sat Oct 29 11:19:08 2011] ../../acisf10958/products/events/fullrun_ccd0_acisf10958_pi14-548_pass1_cl_src72_src.evt and ../../acisf10958/products/events/fullrun_ccd0_acisf10958_pi14-548_pass1_cl_src72_bgd.evt exist, delete to re-create
[Sat Oct 29 11:19:08 2011] Size of ../../acisf10958/products/events/fullrun_ccd0_acisf10958_pi14-548_pass1_cl_src72_src.evt.gz[events] = 61 counts
[Sat Oct 29 11:19:08 2011] Mean chipx,y = (554.89, 196.30)
[Sat Oct 29 11:19:08 2011] Mean tdetx,y = (3257.30, 4577.11)
[Sat Oct 29 11:19:08 2011] chipx,y range = (522.00-586.00, 167.00-226.00)
[Sat Oct 29 11:19:08 2011] Size of ../../acisf10958/products/events/fullrun_ccd0_acisf10958_pi14-548_pass1_cl_src72_bgd.evt.gz[events] = 208 counts
[Sat Oct 29 11:19:08 2011] ../../acisf10958/products/images/fullrun_ccd0_acisf10958_pi14-548_pass1_cl_src72_src.img and ../../acisf10958/products/images/fullrun_ccd0_acisf10958_pi14-548_pass1_cl_src72_bgd.img exist, delete to re-create
[Sat Oct 29 11:19:08 2011] ../../acisf10958/products/spectra/fullrun_ccd0_acisf10958_pi14-548_pass1_cl_src72_src.pi and ../../acisf10958/products/spectra/fullrun_ccd0_acisf10958_pi14-548_pass1_cl_src72_bgd.pi exist, delete to re-create
[Sat Oct 29 11:19:08 2011] Not generating rmf since there are only 27 counts
[Sat Oct 29 11:19:11 2011] ../../acisf10958/products/lightcurves/fullrun_ccd0_acisf10958_pi14-548_pass1_cl_src72_src.lc and ../../acisf10958/products/lightcurves/fullrun_ccd0_acisf10958_pi14-548_pass1_cl_src72_bgd.lc exist, delete to re-create
[Sat Oct 29 11:19:48 2011] 160.873
[Sat Oct 29 11:28:13 2011] Updating aperture counts using extracted products
[Sat Oct 29 11:28:13 2011] Error reading totcts from fullrun_ccd0_acisf10958_pi14-548_pass1_cl_src72_src.pi.gz
[Sat Oct 29 11:28:14 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 11:28:14 2011] Using photon index=1.80, rate=0.000957, arf fullrun_ccd0_acisf10958_pi14-548_pass1_cl_src72.arf
[Sat Oct 29 11:28:14 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 11:28:14 2011] Updating source flux to 1.7e-14
[Sat Oct 29 11:28:25 2011] Source 72 has fewer than 100.000000 counts, skipping spectral fitting