[Sat Oct 29 11:12:03 2011] Detection parameters:
  Position = (1202.2, 718.9) = 20 32 55.34 41 18 53.2
  Extent = 0.8" x 0.5", rotation angle = 60 degrees
  Source counts = 12.9 +/- 3.7
  Background counts = 1.1
  Rate = 0.0004 +/- 0.0001

[Sat Oct 29 11:12:09 2011] Off-axis axis estimate = 2.92'
[Sat Oct 29 11:13:54 2011] Using EEF radius (= 0.56 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 11:13:54 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Sat Oct 29 11:13:54 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.104
[Sat Oct 29 11:13:54 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 0.56"
[Sat Oct 29 11:13:55 2011] fullrun_ccd0_acisf10958_pi14-548_cl_pass0_src12.ximg exists
[Sat Oct 29 11:13:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10958_pi14-548_cl_pass0_src12.csv
[Sat Oct 29 11:13:55 2011] fullrun_ccd0_acisf10958_pi14-548_cl_pass0_src12_1.ximg exists
[Sat Oct 29 11:13:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10958_pi14-548_cl_pass0_src12.csv
[Sat Oct 29 11:13:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10958_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10958_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 11:13:56 2011] fullrun_ccd0_acisf10958_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Sat Oct 29 11:13:56 2011] fullrun_ccd0_acisf10958_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Sat Oct 29 11:13:56 2011] Fit fullrun_ccd0_acisf10958_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Sat Oct 29 11:14:27 2011] Spatial fit model total counts = 14.341100, observed total counts = 15.000000
[Sat Oct 29 11:14:27 2011] Offset between fit and detection position for source 13 = 0.280294 pixels
[Sat Oct 29 11:14:27 2011] 14.764590 total counts/ 2.174490 bgd. counts: snr = 8.537888
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.280294 pixels
  Position = (1202.5, 718.9) = 20 32 55.35 41 18 53.0
  Extent = 0.7 (0.4-1.1)", rotation angle = 0
  Source counts = 12.6 +/- 3.8
  Background counts = 2.2
  Rate = 0.0004 +/- 0.0001
[Sat Oct 29 11:14:27 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 11:14:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 11:14:27 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 11:14:27 2011] Source does appear to be extended
[Sat Oct 29 11:14:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 11:15:17 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 11:15:17 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Sat Oct 29 11:15:17 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.849
[Sat Oct 29 11:15:17 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 0.68"
[Sat Oct 29 11:15:18 2011] fullrun_ccd0_acisf10958_pi14-548_cl_pass1_src12.ximg exists
[Sat Oct 29 11:15:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10958_pi14-548_cl_pass1_src12.csv
[Sat Oct 29 11:15:18 2011] fullrun_ccd0_acisf10958_pi14-548_cl_pass1_src12_1.ximg exists
[Sat Oct 29 11:15:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10958_pi14-548_cl_pass1_src12.csv
[Sat Oct 29 11:15:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10958_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10958_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 11:15:19 2011] fullrun_ccd0_acisf10958_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Sat Oct 29 11:15:19 2011] fullrun_ccd0_acisf10958_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Sat Oct 29 11:15:19 2011] Fit fullrun_ccd0_acisf10958_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Sat Oct 29 11:15:46 2011] Spatial fit model total counts = 14.697400, observed total counts = 15.000000
[Sat Oct 29 11:15:46 2011] Offset between fit and detection position for source 13 = 0.141625 pixels
[Sat Oct 29 11:15:46 2011] 14.989380 total counts/ 2.716980 bgd. counts: snr = 7.445370
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.141625 pixels
  Position = (1202.6, 719.0) = 20 32 55.34 41 18 53.1
  Extent = 0.7 (0.3-0.9)", rotation angle = 0
  Source counts = 12.3 +/- 3.9
  Background counts = 2.7
  Rate = 0.0004 +/- 0.0001
[Sat Oct 29 11:15:46 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 11:15:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 11:15:46 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 11:15:46 2011] Source does appear to be extended
[Sat Oct 29 11:15:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 11:16:35 2011] Not overwriting source region fullrun_ccd0_acisf10958_pi14-548_pass1_cl_src13_src.reg
[Sat Oct 29 11:16:35 2011] Extracting stamp from image fullrun_ccd0_acisf10958_pi14-548_cl_sm2.00.img.gz, (1172, 688) - (1233, 749)
[Sat Oct 29 11:16:35 2011] Writing fullrun_ccd0_acisf10958_pi14-548_pass1_cl_src13.gif
[Sat Oct 29 11:17:11 2011] ../../acisf10958/products/events/fullrun_ccd0_acisf10958_pi14-548_pass1_cl_src13_src.evt and ../../acisf10958/products/events/fullrun_ccd0_acisf10958_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Sat Oct 29 11:17:11 2011] Size of ../../acisf10958/products/events/fullrun_ccd0_acisf10958_pi14-548_pass1_cl_src13_src.evt.gz[events] = 14 counts
[Sat Oct 29 11:17:11 2011] Mean chipx,y = (780.71, 959.86)
[Sat Oct 29 11:17:11 2011] Mean tdetx,y = (4020.86, 4351.29)
[Sat Oct 29 11:17:11 2011] chipx,y range = (763.00-793.00, 946.00-978.00)
[Sat Oct 29 11:17:11 2011] Size of ../../acisf10958/products/events/fullrun_ccd0_acisf10958_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 15 counts
[Sat Oct 29 11:17:11 2011] ../../acisf10958/products/images/fullrun_ccd0_acisf10958_pi14-548_pass1_cl_src13_src.img and ../../acisf10958/products/images/fullrun_ccd0_acisf10958_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Sat Oct 29 11:17:11 2011] ../../acisf10958/products/spectra/fullrun_ccd0_acisf10958_pi14-548_pass1_cl_src13_src.pi and ../../acisf10958/products/spectra/fullrun_ccd0_acisf10958_pi14-548_pass1_cl_src13_bgd.pi exist, delete to re-create
[Sat Oct 29 11:17:11 2011] Not generating rmf since there are only 12 counts
[Sat Oct 29 11:17:13 2011] ../../acisf10958/products/lightcurves/fullrun_ccd0_acisf10958_pi14-548_pass1_cl_src13_src.lc and ../../acisf10958/products/lightcurves/fullrun_ccd0_acisf10958_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Sat Oct 29 11:19:47 2011] 187.879
[Sat Oct 29 11:28:12 2011] Updating aperture counts using extracted products
[Sat Oct 29 11:28:12 2011] Error reading totcts from fullrun_ccd0_acisf10958_pi14-548_pass1_cl_src13_src.pi.gz
[Sat Oct 29 11:28:13 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 11:28:13 2011] Using photon index=1.80, rate=0.000424, arf fullrun_ccd0_acisf10958_pi14-548_pass1_cl_src13.arf
[Sat Oct 29 11:28:13 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 11:28:13 2011] Updating source flux to 6.9e-15
[Sat Oct 29 11:28:25 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting