[Mon Oct 17 07:27:06 2011] Detection parameters:
  Position = (233.9, 484.5) = 20 33 14.16 41 24 13.8
  Extent = 0.6" x 0.5", rotation angle = 113 degrees
  Source counts = 19.9 +/- 4.6
  Background counts = 1.1
  Rate = 0.0007 +/- 0.0002

[Mon Oct 17 07:27:08 2011] Off-axis axis estimate = 1.74'
[Mon Oct 17 07:28:54 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 07:28:54 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Mon Oct 17 07:28:54 2011] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.850
[Mon Oct 17 07:28:54 2011] Giving source the simple spatial ID 31 for pass 0, mean size = 0.41"
[Mon Oct 17 07:28:57 2011] fullrun_ccd3_acisf10957_pi14-548_cl_pass0_src31.ximg exists
[Mon Oct 17 07:28:57 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10957_pi14-548_cl_pass0_src31.csv
[Mon Oct 17 07:28:57 2011] fullrun_ccd3_acisf10957_pi14-548_cl_pass0_src31_1.ximg exists
[Mon Oct 17 07:28:57 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10957_pi14-548_cl_pass0_src31.csv
[Mon Oct 17 07:28:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10957_pi14-548_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10957_pi14-548_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 07:28:59 2011] fullrun_ccd3_acisf10957_pi14-548_cl_pass0_tfrozen_src31.ximg exists
[Mon Oct 17 07:28:59 2011] fullrun_ccd3_acisf10957_pi14-548_cl_pass0_tfrozen_src31_1.ximg exists
[Mon Oct 17 07:28:59 2011] Fit fullrun_ccd3_acisf10957_pi14-548_cl_pass0_tfrozen_src31 appears to have run properly
[Mon Oct 17 07:29:38 2011] Spatial fit model total counts = 23.669500, observed total counts = 24.000000
[Mon Oct 17 07:29:38 2011] Offset between fit and detection position for source 13 = 1.019669 pixels
[Mon Oct 17 07:29:38 2011] 24.184350 total counts/ 6.581050 bgd. counts: snr = 6.861933
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 1.019669 pixels
  Position = (234.2, 485.4) = 20 33 14.17 41 24 14.0
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 17.6 +/- 4.9
  Background counts = 6.6
  Rate = 0.0006 +/- 0.0002
[Mon Oct 17 07:29:38 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 07:29:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 07:29:38 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 07:29:38 2011] Source does appear to be extended
[Mon Oct 17 07:29:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 07:30:22 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 07:30:22 2011] Initial guess for spatial extent in simple fitting = 0.48"
[Mon Oct 17 07:30:22 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.023
[Mon Oct 17 07:30:22 2011] Giving source the simple spatial ID 31 for pass 1, mean size = 0.48"
[Mon Oct 17 07:30:24 2011] fullrun_ccd3_acisf10957_pi14-548_cl_pass1_src31.ximg exists
[Mon Oct 17 07:30:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10957_pi14-548_cl_pass1_src31.csv
[Mon Oct 17 07:30:24 2011] fullrun_ccd3_acisf10957_pi14-548_cl_pass1_src31_1.ximg exists
[Mon Oct 17 07:30:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10957_pi14-548_cl_pass1_src31.csv
[Mon Oct 17 07:30:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10957_pi14-548_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10957_pi14-548_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 07:30:25 2011] fullrun_ccd3_acisf10957_pi14-548_cl_pass1_tfrozen_src31.ximg exists
[Mon Oct 17 07:30:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10957_pi14-548_cl_pass1_tfrozen_src31.csv
[Mon Oct 17 07:30:25 2011] fullrun_ccd3_acisf10957_pi14-548_cl_pass1_tfrozen_src31_1.ximg exists
[Mon Oct 17 07:30:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10957_pi14-548_cl_pass1_tfrozen_src31.csv
[Mon Oct 17 07:30:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10957_pi14-548_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10957_pi14-548_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 07:31:01 2011] Spatial fit model total counts = 18.805400, observed total counts = 24.000000
[Mon Oct 17 07:31:01 2011] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Oct 17 07:31:02 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 07:31:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 07:31:02 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 07:31:02 2011] Source does appear to be extended
[Mon Oct 17 07:31:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 08:28:38 2011] Not overwriting source region fullrun_ccd3_acisf10957_pi14-548_pass1_cl_src13_src.reg
[Mon Oct 17 08:28:38 2011] Extracting stamp from image fullrun_ccd3_acisf10957_pi14-548_cl_sm2.00.img.gz, (212, 463) - (256, 508)
[Mon Oct 17 08:28:38 2011] Writing fullrun_ccd3_acisf10957_pi14-548_pass1_cl_src13.gif
[Mon Oct 17 08:44:13 2011] ../../acisf10957/products/events/fullrun_ccd3_acisf10957_pi14-548_pass1_cl_src13_src.evt and ../../acisf10957/products/events/fullrun_ccd3_acisf10957_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Mon Oct 17 08:44:13 2011] Size of ../../acisf10957/products/events/fullrun_ccd3_acisf10957_pi14-548_pass1_cl_src13_src.evt.gz[events] = 19 counts
[Mon Oct 17 08:44:13 2011] Mean chipx,y = (909.79, 812.05)
[Mon Oct 17 08:44:13 2011] Mean tdetx,y = (4319.95, 3970.79)
[Mon Oct 17 08:44:13 2011] chipx,y range = (896.00-927.00, 801.00-832.00)
[Mon Oct 17 08:44:13 2011] Size of ../../acisf10957/products/events/fullrun_ccd3_acisf10957_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 5 counts
[Mon Oct 17 08:44:13 2011] ../../acisf10957/products/images/fullrun_ccd3_acisf10957_pi14-548_pass1_cl_src13_src.img and ../../acisf10957/products/images/fullrun_ccd3_acisf10957_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Mon Oct 17 08:44:13 2011] Not generating rmf since there are only 17 counts
[Mon Oct 17 08:44:13 2011] arf not found, will run specextract
[Mon Oct 17 08:44:40 2011] ../../acisf10957/products/spectra/fullrun_ccd3_acisf10957_pi14-548_pass1_cl_src13.warf not found
[Mon Oct 17 08:44:40 2011] ../../acisf10957/products/spectra/fullrun_ccd3_acisf10957_pi14-548_pass1_cl_src13.wrmf not found
[Mon Oct 17 08:44:40 2011] Removal of ../../acisf10957/products/spectra/fullrun_ccd3_acisf10957_pi14-548_pass1_cl_src13.soff failed
[Mon Oct 17 08:44:45 2011] ../../acisf10957/products/lightcurves/fullrun_ccd3_acisf10957_pi14-548_pass1_cl_src13_src.lc and ../../acisf10957/products/lightcurves/fullrun_ccd3_acisf10957_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Mon Oct 17 09:17:27 2011] Spectrum 13 has only 18 counts, deleting rmf
[Mon Oct 17 09:17:27 2011] 201.341
[Mon Oct 17 09:17:53 2011] Updating aperture counts using extracted products
[Mon Oct 17 09:17:53 2011] Error reading totcts from fullrun_ccd3_acisf10957_pi14-548_pass1_cl_src13_src.pi.gz
[Mon Oct 17 09:17:54 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 09:17:54 2011] Using photon index=1.80, rate=0.000605, arf fullrun_ccd3_acisf10957_pi14-548_pass1_cl_src13.arf
[Mon Oct 17 09:17:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 09:17:54 2011] Updating source flux to 9.1e-15
[Mon Oct 17 09:18:31 2011] Flag p found in src. 13 procflags, skipping spectral fitting
[Mon Oct 17 09:18:31 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting