[Mon Oct 17 07:27:05 2011] Detection parameters:
  Position = (878.8, 835.1) = 20 33 26.33 41 31 8.4
  Extent = 0.9" x 0.6", rotation angle = 169 degrees
  Source counts = 10.2 +/- 3.5
  Background counts = 1.8
  Rate = 0.0004 +/- 0.0001

[Mon Oct 17 07:27:05 2011] Off-axis axis estimate = 6.42'
[Mon Oct 17 07:28:50 2011] Using EEF radius (= 1.85 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 07:28:50 2011] Initial guess for spatial extent in simple fitting = 1.85"
[Mon Oct 17 07:28:50 2011] source mask rpix=3.8, npix_max = 72, mask sum = 64, frac = 0.883
[Mon Oct 17 07:28:50 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 1.85"
[Mon Oct 17 07:28:53 2011] fullrun_ccd2_acisf10957_pi14-548_cl_pass0_src29.ximg exists
[Mon Oct 17 07:28:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10957_pi14-548_cl_pass0_src29.csv
[Mon Oct 17 07:28:53 2011] fullrun_ccd2_acisf10957_pi14-548_cl_pass0_src29_1.ximg exists
[Mon Oct 17 07:28:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10957_pi14-548_cl_pass0_src29.csv
[Mon Oct 17 07:28:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10957_pi14-548_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10957_pi14-548_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 07:28:54 2011] fullrun_ccd2_acisf10957_pi14-548_cl_pass0_tfrozen_src29.ximg exists
[Mon Oct 17 07:28:54 2011] fullrun_ccd2_acisf10957_pi14-548_cl_pass0_tfrozen_src29_1.ximg exists
[Mon Oct 17 07:28:54 2011] Fit fullrun_ccd2_acisf10957_pi14-548_cl_pass0_tfrozen_src29 appears to have run properly
[Mon Oct 17 07:29:31 2011] Warning, spatial fit 29 centroid is now closest to src. 17
[Mon Oct 17 07:29:31 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 07:29:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 07:29:31 2011] Assessing source extent using major
[Mon Oct 17 07:29:31 2011] Source does appear to be extended
[Mon Oct 17 07:29:31 2011] Computing asymmetry using major and minor axis, asym = 1.54
[Mon Oct 17 07:29:31 2011] Source is asymmetric
[Mon Oct 17 07:30:20 2011] Using EEF radius (= 1.85 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 07:30:20 2011] Initial guess for spatial extent in simple fitting = 1.85"
[Mon Oct 17 07:30:20 2011] source mask rpix=3.8, npix_max = 72, mask sum = 64, frac = 0.883
[Mon Oct 17 07:30:20 2011] Giving source the simple spatial ID 29 for pass 1, mean size = 1.85"
[Mon Oct 17 07:30:21 2011] fullrun_ccd2_acisf10957_pi14-548_cl_pass1_src29.ximg exists
[Mon Oct 17 07:30:21 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf10957_pi14-548_cl_pass1_src29.csv
[Mon Oct 17 07:30:21 2011] fullrun_ccd2_acisf10957_pi14-548_cl_pass1_src29_1.ximg exists
[Mon Oct 17 07:30:21 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf10957_pi14-548_cl_pass1_src29.csv
[Mon Oct 17 07:30:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10957_pi14-548_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10957_pi14-548_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 07:30:22 2011] fullrun_ccd2_acisf10957_pi14-548_cl_pass1_tfrozen_src29.ximg exists
[Mon Oct 17 07:30:22 2011] fullrun_ccd2_acisf10957_pi14-548_cl_pass1_tfrozen_src29_1.ximg exists
[Mon Oct 17 07:30:22 2011] Fit fullrun_ccd2_acisf10957_pi14-548_cl_pass1_tfrozen_src29 appears to have run properly
[Mon Oct 17 07:30:53 2011] Spatial fit model total counts = 23.486800, observed total counts = 24.000000
[Mon Oct 17 07:30:53 2011] Offset between fit and detection position for source 42 = 0.577920 pixels
[Mon Oct 17 07:30:53 2011] 10.920465 total counts/ 0.203665 bgd. counts: snr = 23.746900
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 0.577920 pixels
  Position = (878.7, 835.7) = 20 33 26.35 41 31 8.4
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 10.7 +/- 3.3
  Background counts = 0.2
  Rate = 0.0004 +/- 0.0001
[Mon Oct 17 07:30:54 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 07:30:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 07:30:54 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 07:30:54 2011] Source does appear to be extended
[Mon Oct 17 07:30:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 08:03:57 2011] Not overwriting source region fullrun_ccd2_acisf10957_pi14-548_pass1_cl_src42_src.reg
[Mon Oct 17 08:03:57 2011] Extracting stamp from image fullrun_ccd2_acisf10957_pi14-548_cl_sm2.00.img.gz, (845, 802) - (912, 869)
[Mon Oct 17 08:03:57 2011] Writing fullrun_ccd2_acisf10957_pi14-548_pass1_cl_src42.gif
[Mon Oct 17 08:18:59 2011] ../../acisf10957/products/events/fullrun_ccd2_acisf10957_pi14-548_pass1_cl_src42_src.evt and ../../acisf10957/products/events/fullrun_ccd2_acisf10957_pi14-548_pass1_cl_src42_bgd.evt exist, delete to re-create
[Mon Oct 17 08:18:59 2011] Size of ../../acisf10957/products/events/fullrun_ccd2_acisf10957_pi14-548_pass1_cl_src42_src.evt.gz[events] = 11 counts
[Mon Oct 17 08:18:59 2011] Mean chipx,y = (735.73, 615.00)
[Mon Oct 17 08:18:59 2011] Mean tdetx,y = (3676.00, 3350.27)
[Mon Oct 17 08:18:59 2011] chipx,y range = (718.00-752.00, 603.00-634.00)
[Mon Oct 17 08:18:59 2011] Size of ../../acisf10957/products/events/fullrun_ccd2_acisf10957_pi14-548_pass1_cl_src42_bgd.evt.gz[events] = 15 counts
[Mon Oct 17 08:18:59 2011] ../../acisf10957/products/images/fullrun_ccd2_acisf10957_pi14-548_pass1_cl_src42_src.img and ../../acisf10957/products/images/fullrun_ccd2_acisf10957_pi14-548_pass1_cl_src42_bgd.img exist, delete to re-create
[Mon Oct 17 08:18:59 2011] Not generating rmf since there are only 10 counts
[Mon Oct 17 08:18:59 2011] arf not found, will run specextract
[Mon Oct 17 08:19:32 2011] ../../acisf10957/products/spectra/fullrun_ccd2_acisf10957_pi14-548_pass1_cl_src42.warf not found
[Mon Oct 17 08:19:32 2011] ../../acisf10957/products/spectra/fullrun_ccd2_acisf10957_pi14-548_pass1_cl_src42.wrmf not found
[Mon Oct 17 08:19:32 2011] Removal of ../../acisf10957/products/spectra/fullrun_ccd2_acisf10957_pi14-548_pass1_cl_src42.soff failed
[Mon Oct 17 08:19:37 2011] ../../acisf10957/products/lightcurves/fullrun_ccd2_acisf10957_pi14-548_pass1_cl_src42_src.lc and ../../acisf10957/products/lightcurves/fullrun_ccd2_acisf10957_pi14-548_pass1_cl_src42_bgd.lc exist, delete to re-create
[Mon Oct 17 08:28:37 2011] Spectrum 42 has only 11 counts, deleting rmf
[Mon Oct 17 08:28:37 2011] 171.819
[Mon Oct 17 09:17:52 2011] Updating aperture counts using extracted products
[Mon Oct 17 09:17:52 2011] Error reading totcts from fullrun_ccd2_acisf10957_pi14-548_pass1_cl_src42_src.pi.gz
[Mon Oct 17 09:17:52 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 09:17:52 2011] Using photon index=1.80, rate=0.000369, arf fullrun_ccd2_acisf10957_pi14-548_pass1_cl_src42.arf
[Mon Oct 17 09:17:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 09:17:52 2011] Updating source flux to 6.3e-15
[Mon Oct 17 09:18:27 2011] Source 42 has fewer than 100.000000 counts, skipping spectral fitting