[Mon Oct 17 07:26:58 2011] Detection parameters:
  Position = (1207.6, 632.7) = 20 33 33.63 41 21 52.7
  Extent = 0.7" x 0.5", rotation angle = 41 degrees
  Source counts = 14.7 +/- 4.0
  Background counts = 1.3
  Rate = 0.0005 +/- 0.0001

[Mon Oct 17 07:27:00 2011] Off-axis axis estimate = 3.49'
[Mon Oct 17 07:28:40 2011] Using EEF radius (= 0.69 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 07:28:40 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Mon Oct 17 07:28:40 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.827
[Mon Oct 17 07:28:40 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.69"
[Mon Oct 17 07:28:41 2011] fullrun_ccd0_acisf10957_pi14-548_cl_pass0_src9.ximg exists
[Mon Oct 17 07:28:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10957_pi14-548_cl_pass0_src9.csv
[Mon Oct 17 07:28:41 2011] fullrun_ccd0_acisf10957_pi14-548_cl_pass0_src9_1.ximg exists
[Mon Oct 17 07:28:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10957_pi14-548_cl_pass0_src9.csv
[Mon Oct 17 07:28:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10957_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10957_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 07:28:42 2011] fullrun_ccd0_acisf10957_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Mon Oct 17 07:28:42 2011] fullrun_ccd0_acisf10957_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Oct 17 07:28:42 2011] Fit fullrun_ccd0_acisf10957_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Mon Oct 17 07:29:17 2011] Spatial fit model total counts = 18.736900, observed total counts = 19.000000
[Mon Oct 17 07:29:17 2011] Offset between fit and detection position for source 10 = 0.971403 pixels
[Mon Oct 17 07:29:17 2011] 18.206160 total counts/ 3.318060 bgd. counts: snr = 8.173295
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.971403 pixels
  Position = (1208.2, 633.4) = 20 33 33.62 41 21 52.8
  Extent = 0.7 (0.4-0.9)", rotation angle = 0
  Source counts = 14.9 +/- 4.3
  Background counts = 3.3
  Rate = 0.0005 +/- 0.0001
[Mon Oct 17 07:29:18 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 07:29:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 07:29:18 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 07:29:18 2011] Source does appear to be extended
[Mon Oct 17 07:29:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 07:30:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 07:30:14 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Mon Oct 17 07:30:14 2011] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.066
[Mon Oct 17 07:30:14 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.71"
[Mon Oct 17 07:30:15 2011] fullrun_ccd0_acisf10957_pi14-548_cl_pass1_src9.ximg exists
[Mon Oct 17 07:30:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10957_pi14-548_cl_pass1_src9.csv
[Mon Oct 17 07:30:15 2011] fullrun_ccd0_acisf10957_pi14-548_cl_pass1_src9_1.ximg exists
[Mon Oct 17 07:30:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10957_pi14-548_cl_pass1_src9.csv
[Mon Oct 17 07:30:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10957_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10957_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 07:30:15 2011] fullrun_ccd0_acisf10957_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Mon Oct 17 07:30:15 2011] fullrun_ccd0_acisf10957_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Oct 17 07:30:15 2011] Fit fullrun_ccd0_acisf10957_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Mon Oct 17 07:30:41 2011] Spatial fit model total counts = 16.181200, observed total counts = 17.000000
[Mon Oct 17 07:30:41 2011] Offset between fit and detection position for source 10 = 0.130911 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.130911 pixels
  Position = (1208.1, 633.3) = 20 33 33.62 41 21 52.8
  Extent = 0.8 (0.4-1.0)", rotation angle = 0
  Source counts = 16.1 +/- 4.0
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Mon Oct 17 07:30:41 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 07:30:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 07:30:41 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 07:30:41 2011] Source does appear to be extended
[Mon Oct 17 07:30:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 07:31:36 2011] Not overwriting source region fullrun_ccd0_acisf10957_pi14-548_pass1_cl_src10_src.reg
[Mon Oct 17 07:31:36 2011] Extracting stamp from image fullrun_ccd0_acisf10957_pi14-548_cl_sm2.00.img.gz, (1173, 598) - (1243, 668)
[Mon Oct 17 07:31:36 2011] Writing fullrun_ccd0_acisf10957_pi14-548_pass1_cl_src10.gif
[Mon Oct 17 07:32:06 2011] ../../acisf10957/products/events/fullrun_ccd0_acisf10957_pi14-548_pass1_cl_src10_src.evt and ../../acisf10957/products/events/fullrun_ccd0_acisf10957_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Mon Oct 17 07:32:06 2011] Size of ../../acisf10957/products/events/fullrun_ccd0_acisf10957_pi14-548_pass1_cl_src10_src.evt.gz[events] = 16 counts
[Mon Oct 17 07:32:06 2011] Mean chipx,y = (702.38, 989.50)
[Mon Oct 17 07:32:06 2011] Mean tdetx,y = (4050.50, 4429.62)
[Mon Oct 17 07:32:06 2011] chipx,y range = (681.00-717.00, 975.00-1006.00)
[Mon Oct 17 07:32:06 2011] Size of ../../acisf10957/products/events/fullrun_ccd0_acisf10957_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 11 counts
[Mon Oct 17 07:32:06 2011] ../../acisf10957/products/images/fullrun_ccd0_acisf10957_pi14-548_pass1_cl_src10_src.img and ../../acisf10957/products/images/fullrun_ccd0_acisf10957_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Mon Oct 17 07:32:06 2011] ../../acisf10957/products/spectra/fullrun_ccd0_acisf10957_pi14-548_pass1_cl_src10_src.pi and ../../acisf10957/products/spectra/fullrun_ccd0_acisf10957_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Mon Oct 17 07:32:06 2011] Not generating rmf since there are only 16 counts
[Mon Oct 17 07:32:09 2011] ../../acisf10957/products/lightcurves/fullrun_ccd0_acisf10957_pi14-548_pass1_cl_src10_src.lc and ../../acisf10957/products/lightcurves/fullrun_ccd0_acisf10957_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Mon Oct 17 07:34:27 2011] 194.804
[Mon Oct 17 09:17:49 2011] Updating aperture counts using extracted products
[Mon Oct 17 09:17:49 2011] Error reading totcts from fullrun_ccd0_acisf10957_pi14-548_pass1_cl_src10_src.pi.gz
[Mon Oct 17 09:17:50 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 09:17:50 2011] Using photon index=1.80, rate=0.000552, arf fullrun_ccd0_acisf10957_pi14-548_pass1_cl_src10.arf
[Mon Oct 17 09:17:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 09:17:50 2011] Updating source flux to 8.5e-15
[Mon Oct 17 09:18:01 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting