[Fri Sep 30 15:23:24 2011] Detection parameters:
  Position = (430.0, 420.7) = 20 32 47.42 41 12 51.6
  Extent = 0.5" x 0.5", rotation angle = 104 degrees
  Source counts = 13.9 +/- 3.9
  Background counts = 1.1
  Rate = 0.0005 +/- 0.0001

[Fri Sep 30 15:23:29 2011] Off-axis axis estimate = 3.42'
[Fri Sep 30 15:25:44 2011] Using EEF radius (= 0.67 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:25:44 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Fri Sep 30 15:25:44 2011] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.148
[Fri Sep 30 15:25:44 2011] Giving source the simple spatial ID 36 for pass 0, mean size = 0.67"
[Fri Sep 30 15:25:46 2011] fullrun_ccd3_acisf10956_pi14-548_cl_pass0_src36.ximg exists
[Fri Sep 30 15:25:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10956_pi14-548_cl_pass0_src36.csv
[Fri Sep 30 15:25:46 2011] fullrun_ccd3_acisf10956_pi14-548_cl_pass0_src36_1.ximg exists
[Fri Sep 30 15:25:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10956_pi14-548_cl_pass0_src36.csv
[Fri Sep 30 15:25:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10956_pi14-548_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10956_pi14-548_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:25:47 2011] fullrun_ccd3_acisf10956_pi14-548_cl_pass0_tfrozen_src36.ximg exists
[Fri Sep 30 15:25:47 2011] fullrun_ccd3_acisf10956_pi14-548_cl_pass0_tfrozen_src36_1.ximg exists
[Fri Sep 30 15:25:47 2011] Fit fullrun_ccd3_acisf10956_pi14-548_cl_pass0_tfrozen_src36 appears to have run properly
[Fri Sep 30 15:26:42 2011] Spatial fit model total counts = 18.707700, observed total counts = 19.000000
[Fri Sep 30 15:26:42 2011] Offset between fit and detection position for source 7 = 0.886091 pixels
[Fri Sep 30 15:26:42 2011] 18.553500 total counts/ 4.851400 bgd. counts: snr = 6.220905
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.886091 pixels
  Position = (430.5, 421.4) = 20 32 47.42 41 12 51.7
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 13.7 +/- 4.3
  Background counts = 4.9
  Rate = 0.0005 +/- 0.0002
[Fri Sep 30 15:26:42 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:26:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:26:42 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:26:42 2011] Source does appear to be extended
[Fri Sep 30 15:26:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:27:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:27:33 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Sep 30 15:27:33 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.382
[Fri Sep 30 15:27:33 2011] Giving source the simple spatial ID 36 for pass 1, mean size = 0.38"
[Fri Sep 30 15:27:38 2011] fullrun_ccd3_acisf10956_pi14-548_cl_pass1_src36.ximg exists
[Fri Sep 30 15:27:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10956_pi14-548_cl_pass1_src36.csv
[Fri Sep 30 15:27:38 2011] fullrun_ccd3_acisf10956_pi14-548_cl_pass1_src36_1.ximg exists
[Fri Sep 30 15:27:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10956_pi14-548_cl_pass1_src36.csv
[Fri Sep 30 15:27:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10956_pi14-548_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10956_pi14-548_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:27:39 2011] fullrun_ccd3_acisf10956_pi14-548_cl_pass1_tfrozen_src36.ximg exists
[Fri Sep 30 15:27:39 2011] fullrun_ccd3_acisf10956_pi14-548_cl_pass1_tfrozen_src36_1.ximg exists
[Fri Sep 30 15:27:39 2011] Fit fullrun_ccd3_acisf10956_pi14-548_cl_pass1_tfrozen_src36 appears to have run properly
[Fri Sep 30 15:28:22 2011] Spatial fit model total counts = 18.908000, observed total counts = 19.000000
[Fri Sep 30 15:28:22 2011] Offset between fit and detection position for source 7 = 0.052564 pixels
[Fri Sep 30 15:28:22 2011] 18.683270 total counts/ 4.965470 bgd. counts: snr = 6.156080
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.052564 pixels
  Position = (430.5, 421.5) = 20 32 47.42 41 12 51.7
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 13.7 +/- 4.3
  Background counts = 5.0
  Rate = 0.0005 +/- 0.0002
[Fri Sep 30 15:28:22 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:28:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:28:22 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:28:22 2011] Source does appear to be extended
[Fri Sep 30 15:28:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:42:39 2011] Not overwriting source region fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src7_src.reg
[Fri Sep 30 15:42:39 2011] Extracting stamp from image fullrun_ccd3_acisf10956_pi14-548_cl_sm2.00.img.gz, (412, 403) - (449, 439)
[Fri Sep 30 15:42:39 2011] Writing fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src7.gif
[Fri Sep 30 15:44:20 2011] ../../acisf10956/products/events/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src7_src.evt and ../../acisf10956/products/events/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Fri Sep 30 15:44:21 2011] Size of ../../acisf10956/products/events/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src7_src.evt.gz[events] = 15 counts
[Fri Sep 30 15:44:21 2011] Mean chipx,y = (889.53, 612.87)
[Fri Sep 30 15:44:21 2011] Mean tdetx,y = (4519.13, 3950.53)
[Fri Sep 30 15:44:21 2011] chipx,y range = (872.00-903.00, 599.00-632.00)
[Fri Sep 30 15:44:21 2011] Size of ../../acisf10956/products/events/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 8 counts
[Fri Sep 30 15:44:21 2011] ../../acisf10956/products/images/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src7_src.img and ../../acisf10956/products/images/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Fri Sep 30 15:44:21 2011] ../../acisf10956/products/spectra/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src7_src.pi and ../../acisf10956/products/spectra/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Fri Sep 30 15:44:21 2011] Not generating rmf since there are only 13 counts
[Fri Sep 30 15:44:23 2011] ../../acisf10956/products/lightcurves/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src7_src.lc and ../../acisf10956/products/lightcurves/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Fri Sep 30 15:44:53 2011] 196.234
[Fri Sep 30 15:45:09 2011] Updating aperture counts using extracted products
[Fri Sep 30 15:45:09 2011] Error reading totcts from fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src7_src.pi.gz
[Fri Sep 30 15:45:10 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 15:45:10 2011] Using photon index=1.80, rate=0.000496, arf fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src7.arf
[Fri Sep 30 15:45:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 15:45:10 2011] Updating source flux to 7.7e-15
[Fri Sep 30 15:46:06 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting