[Fri Sep 30 15:23:26 2011] Detection parameters:
  Position = (465.4, 854.9) = 20 32 45.86 41 16 25.2
  Extent = 0.6" x 0.5", rotation angle = 138 degrees
  Source counts = 12.9 +/- 3.7
  Background counts = 1.1
  Rate = 0.0005 +/- 0.0001

[Fri Sep 30 15:23:29 2011] Off-axis axis estimate = 4.29'
[Fri Sep 30 15:25:44 2011] Using EEF radius (= 0.92 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:25:44 2011] Initial guess for spatial extent in simple fitting = 0.92"
[Fri Sep 30 15:25:44 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.113
[Fri Sep 30 15:25:44 2011] Giving source the simple spatial ID 39 for pass 0, mean size = 0.92"
[Fri Sep 30 15:25:46 2011] fullrun_ccd3_acisf10956_pi14-548_cl_pass0_src39.ximg exists
[Fri Sep 30 15:25:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10956_pi14-548_cl_pass0_src39.csv
[Fri Sep 30 15:25:46 2011] fullrun_ccd3_acisf10956_pi14-548_cl_pass0_src39_1.ximg exists
[Fri Sep 30 15:25:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10956_pi14-548_cl_pass0_src39.csv
[Fri Sep 30 15:25:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10956_pi14-548_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10956_pi14-548_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:25:47 2011] fullrun_ccd3_acisf10956_pi14-548_cl_pass0_tfrozen_src39.ximg exists
[Fri Sep 30 15:25:47 2011] fullrun_ccd3_acisf10956_pi14-548_cl_pass0_tfrozen_src39_1.ximg exists
[Fri Sep 30 15:25:47 2011] Fit fullrun_ccd3_acisf10956_pi14-548_cl_pass0_tfrozen_src39 appears to have run properly
[Fri Sep 30 15:26:42 2011] Spatial fit model total counts = 18.220800, observed total counts = 19.000000
[Fri Sep 30 15:26:42 2011] Offset between fit and detection position for source 31 = 0.609073 pixels
[Fri Sep 30 15:26:42 2011] 18.740680 total counts/ 7.194580 bgd. counts: snr = 4.304598
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.609073 pixels
  Position = (466.0, 855.1) = 20 32 45.85 41 16 25.0
  Extent = 0.5 (0.3-0.8)", rotation angle = 0
  Source counts = 11.5 +/- 4.3
  Background counts = 7.2
  Rate = 0.0004 +/- 0.0002
[Fri Sep 30 15:26:42 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:26:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:26:42 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:26:42 2011] Source does appear to be extended
[Fri Sep 30 15:26:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:27:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:27:33 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Fri Sep 30 15:27:33 2011] source mask rpix=1.0, npix_max = 8, mask sum = 6, frac = 0.673
[Fri Sep 30 15:27:33 2011] Giving source the simple spatial ID 39 for pass 1, mean size = 0.49"
[Fri Sep 30 15:27:38 2011] fullrun_ccd3_acisf10956_pi14-548_cl_pass1_src39.ximg exists
[Fri Sep 30 15:27:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10956_pi14-548_cl_pass1_src39.csv
[Fri Sep 30 15:27:38 2011] fullrun_ccd3_acisf10956_pi14-548_cl_pass1_src39_1.ximg exists
[Fri Sep 30 15:27:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10956_pi14-548_cl_pass1_src39.csv
[Fri Sep 30 15:27:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10956_pi14-548_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10956_pi14-548_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:27:39 2011] fullrun_ccd3_acisf10956_pi14-548_cl_pass1_tfrozen_src39.ximg exists
[Fri Sep 30 15:27:39 2011] fullrun_ccd3_acisf10956_pi14-548_cl_pass1_tfrozen_src39_1.ximg exists
[Fri Sep 30 15:27:39 2011] Fit fullrun_ccd3_acisf10956_pi14-548_cl_pass1_tfrozen_src39 appears to have run properly
[Fri Sep 30 15:28:22 2011] Spatial fit model total counts = 19.159500, observed total counts = 20.000000
[Fri Sep 30 15:28:22 2011] Offset between fit and detection position for source 31 = 0.018635 pixels
[Fri Sep 30 15:28:22 2011] 19.420290 total counts/ 7.888190 bgd. counts: snr = 4.106007
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.018635 pixels
  Position = (466.0, 855.1) = 20 32 45.85 41 16 25.1
  Extent = 0.5 (0.2-0.8)", rotation angle = 0
  Source counts = 11.5 +/- 4.4
  Background counts = 7.9
  Rate = 0.0004 +/- 0.0002
[Fri Sep 30 15:28:22 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:28:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:28:22 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:28:22 2011] Source does appear to be extended
[Fri Sep 30 15:28:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:42:39 2011] Not overwriting source region fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src31_src.reg
[Fri Sep 30 15:42:39 2011] Extracting stamp from image fullrun_ccd3_acisf10956_pi14-548_cl_sm2.00.img.gz, (444, 833) - (488, 877)
[Fri Sep 30 15:42:39 2011] Writing fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src31.gif
[Fri Sep 30 15:44:29 2011] ../../acisf10956/products/events/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src31_src.evt and ../../acisf10956/products/events/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src31_bgd.evt exist, delete to re-create
[Fri Sep 30 15:44:29 2011] Size of ../../acisf10956/products/events/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src31_src.evt.gz[events] = 14 counts
[Fri Sep 30 15:44:29 2011] Mean chipx,y = (482.29, 790.86)
[Fri Sep 30 15:44:29 2011] Mean tdetx,y = (4341.14, 3543.29)
[Fri Sep 30 15:44:29 2011] chipx,y range = (464.00-499.00, 771.00-800.00)
[Fri Sep 30 15:44:29 2011] Size of ../../acisf10956/products/events/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src31_bgd.evt.gz[events] = 8 counts
[Fri Sep 30 15:44:29 2011] ../../acisf10956/products/images/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src31_src.img and ../../acisf10956/products/images/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src31_bgd.img exist, delete to re-create
[Fri Sep 30 15:44:29 2011] ../../acisf10956/products/spectra/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src31_src.pi and ../../acisf10956/products/spectra/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src31_bgd.pi exist, delete to re-create
[Fri Sep 30 15:44:29 2011] Not generating rmf since there are only 11 counts
[Fri Sep 30 15:44:32 2011] ../../acisf10956/products/lightcurves/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src31_src.lc and ../../acisf10956/products/lightcurves/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src31_bgd.lc exist, delete to re-create
[Fri Sep 30 15:44:54 2011] 176.045
[Fri Sep 30 15:45:09 2011] Updating aperture counts using extracted products
[Fri Sep 30 15:45:09 2011] Error reading totcts from fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src31_src.pi.gz
[Fri Sep 30 15:45:10 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 15:45:10 2011] Using photon index=1.80, rate=0.000417, arf fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src31.arf
[Fri Sep 30 15:45:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 15:45:10 2011] Updating source flux to 7.1e-15
[Fri Sep 30 15:46:06 2011] Source 31 has fewer than 100.000000 counts, skipping spectral fitting