[Fri Sep 30 15:23:24 2011] Detection parameters:
  Position = (1002.3, 1086.8) = 20 32 22.41 41 18 18.9
  Extent = 2.4" x 1.6", rotation angle = 131 degrees
  Source counts = 7324.6 +/- 88.9
  Background counts = 572.4
  Rate = 0.3 +/- 0.003

[Fri Sep 30 15:23:29 2011] Off-axis axis estimate = 9.04'
[Fri Sep 30 15:25:44 2011] Using EEF radius (= 3.61 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:25:44 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 15:25:44 2011] Initial guess for spatial extent in simple fitting = 3.61"
[Fri Sep 30 15:25:44 2011] source mask rpix=7.3, npix_max = 245, mask sum = 256, frac = 1.043
[Fri Sep 30 15:25:44 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.61"
[Fri Sep 30 15:25:45 2011] fullrun_ccd3_acisf10956_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 30 15:25:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10956_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 15:25:45 2011] fullrun_ccd3_acisf10956_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 30 15:25:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10956_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 15:25:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10956_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10956_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:25:46 2011] fullrun_ccd3_acisf10956_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 15:25:46 2011] fullrun_ccd3_acisf10956_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 15:25:46 2011] Fit fullrun_ccd3_acisf10956_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 30 15:26:42 2011] Spatial fit model total counts = 8014.150000, observed total counts = 7985.000000
[Fri Sep 30 15:26:42 2011] Offset between fit and detection position for source 1 = 0.629481 pixels
[Fri Sep 30 15:26:42 2011] 8015.724000 total counts/ 744.314000 bgd. counts: snr = 266.526588
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.629481 pixels
  Position = (1002.6, 1087.3) = 20 32 22.42 41 18 18.9
  Extent = 3.0 (3.0-3.1)", rotation angle = 0
  Source counts = 7271.4 +/- 89.5
  Background counts = 744.3
  Rate = 0.3 +/- 0.003
[Fri Sep 30 15:26:42 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:26:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:26:42 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:26:42 2011] Source does appear to be extended
[Fri Sep 30 15:26:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:27:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:27:33 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 15:27:33 2011] Initial guess for spatial extent in simple fitting = 3.04"
[Fri Sep 30 15:27:33 2011] source mask rpix=6.2, npix_max = 178, mask sum = 169, frac = 0.949
[Fri Sep 30 15:27:33 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.04"
[Fri Sep 30 15:27:36 2011] fullrun_ccd3_acisf10956_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 30 15:27:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10956_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 15:27:36 2011] fullrun_ccd3_acisf10956_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 30 15:27:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10956_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 15:27:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10956_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10956_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:27:38 2011] fullrun_ccd3_acisf10956_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 15:27:38 2011] fullrun_ccd3_acisf10956_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 15:27:38 2011] Fit fullrun_ccd3_acisf10956_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 30 15:28:22 2011] Spatial fit model total counts = 7909.020000, observed total counts = 7900.000000
[Fri Sep 30 15:28:22 2011] Offset between fit and detection position for source 1 = 0.061218 pixels
[Fri Sep 30 15:28:22 2011] 7907.239000 total counts/ 929.839000 bgd. counts: snr = 228.817766
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.061218 pixels
  Position = (1002.6, 1087.4) = 20 32 22.41 41 18 18.9
  Extent = 2.9 (2.8-2.9)", rotation angle = 0
  Source counts = 6977.4 +/- 88.9
  Background counts = 929.8
  Rate = 0.3 +/- 0.003
[Fri Sep 30 15:28:22 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:28:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:28:22 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:28:22 2011] Source does appear to be extended
[Fri Sep 30 15:28:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:42:38 2011] Not overwriting source region fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src1_src.reg
[Fri Sep 30 15:42:38 2011] Extracting stamp from image fullrun_ccd3_acisf10956_pi14-548_cl_sm2.00.img.gz, (871, 955) - (1135, 1219)
[Fri Sep 30 15:42:38 2011] Writing fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src1.gif
[Fri Sep 30 15:42:41 2011] ../../acisf10956/products/events/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src1_src.evt and ../../acisf10956/products/events/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Sep 30 15:42:41 2011] Size of ../../acisf10956/products/events/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src1_src.evt.gz[events] = 7762 counts
[Fri Sep 30 15:42:41 2011] Mean chipx,y = (28.52, 411.83)
[Fri Sep 30 15:42:41 2011] Mean tdetx,y = (4720.17, 3089.52)
[Fri Sep 30 15:42:41 2011] chipx,y range = (2.00-66.00, 373.00-450.00)
[Fri Sep 30 15:42:41 2011] Size of ../../acisf10956/products/events/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 490 counts
[Fri Sep 30 15:42:41 2011] ../../acisf10956/products/images/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src1_src.img and ../../acisf10956/products/images/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Sep 30 15:42:41 2011] ../../acisf10956/products/spectra/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src1_src.pi and ../../acisf10956/products/spectra/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Sep 30 15:42:44 2011] ../../acisf10956/products/lightcurves/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src1_src.lc and ../../acisf10956/products/lightcurves/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Sep 30 15:44:52 2011] Keeping rmf generated by specextract
[Fri Sep 30 15:44:52 2011] 159.803
[Fri Sep 30 15:45:09 2011] Updating aperture counts using extracted products
[Fri Sep 30 15:45:09 2011] Error reading totcts from fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Sep 30 15:45:09 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 15:45:09 2011] Using photon index=1.80, rate=0.252, arf fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src1.arf
[Fri Sep 30 15:45:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 15:45:09 2011] Updating source flux to 4.7e-12
[Fri Sep 30 15:46:18 2011] Reading fit data from acisf10956/analysis//spectral/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src1_pl.csv
[Fri Sep 30 15:46:18 2011] Spectral fit parameter nH value = 1.01079e+22
[Fri Sep 30 15:46:18 2011] Spectral fit parameter PhoIndex value = 3.64405
[Fri Sep 30 15:46:18 2011] Failed to get F(0.3-8.0) from acisf10956/analysis//spectral/fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Sep 30 15:46:18 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 15:46:18 2011] Using Nh = 1e+22, photon index=3.64, rate=0.252, arf fullrun_ccd3_acisf10956_pi14-548_pass1_cl_src1.arf
[Fri Sep 30 15:46:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 15:46:18 2011] Updating source flux to 2.4e-12