[Fri Sep 30 15:23:20 2011] Detection parameters:
  Position = (834.2, 91.5) = 20 33 10.09 41 14 14.2
  Extent = 0.5" x 0.5", rotation angle = 72 degrees
  Source counts = 22.6 +/- 4.9
  Background counts = 1.4
  Rate = 0.0008 +/- 0.0002

[Fri Sep 30 15:23:23 2011] Off-axis axis estimate = 1.06'
[Fri Sep 30 15:25:32 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:25:32 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Sep 30 15:25:32 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.926
[Fri Sep 30 15:25:32 2011] Giving source the simple spatial ID 33 for pass 0, mean size = 0.38"
[Fri Sep 30 15:25:37 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass0_src33.ximg exists
[Fri Sep 30 15:25:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10956_pi14-548_cl_pass0_src33.csv
[Fri Sep 30 15:25:37 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass0_src33_1.ximg exists
[Fri Sep 30 15:25:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10956_pi14-548_cl_pass0_src33.csv
[Fri Sep 30 15:25:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10956_pi14-548_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10956_pi14-548_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:25:43 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass0_tfrozen_src33.ximg exists
[Fri Sep 30 15:25:43 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass0_tfrozen_src33_1.ximg exists
[Fri Sep 30 15:25:43 2011] Fit fullrun_ccd2_acisf10956_pi14-548_cl_pass0_tfrozen_src33 appears to have run properly
[Fri Sep 30 15:26:32 2011] Spatial fit model total counts = 28.413900, observed total counts = 29.000000
[Fri Sep 30 15:26:32 2011] Offset between fit and detection position for source 65 = 1.112654 pixels
[Fri Sep 30 15:26:32 2011] 27.378020 total counts/ 6.856320 bgd. counts: snr = 7.837324
Spatial fit parameters:
  Offset between fit and detection position for source 65 = 1.112654 pixels
  Position = (835.0, 92.3) = 20 33 10.07 41 14 14.4
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 20.5 +/- 5.2
  Background counts = 6.9
  Rate = 0.0007 +/- 0.0002
[Fri Sep 30 15:26:32 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:26:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:26:32 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:26:32 2011] Source does appear to be extended
[Fri Sep 30 15:26:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:27:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:27:29 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Fri Sep 30 15:27:29 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.781
[Fri Sep 30 15:27:29 2011] Giving source the simple spatial ID 33 for pass 1, mean size = 0.44"
[Fri Sep 30 15:27:30 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src33.ximg exists
[Fri Sep 30 15:27:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src33.csv
[Fri Sep 30 15:27:30 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src33_1.ximg exists
[Fri Sep 30 15:27:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src33.csv
[Fri Sep 30 15:27:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:27:32 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass1_tfrozen_src33.ximg exists
[Fri Sep 30 15:27:32 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass1_tfrozen_src33_1.ximg exists
[Fri Sep 30 15:27:32 2011] Fit fullrun_ccd2_acisf10956_pi14-548_cl_pass1_tfrozen_src33 appears to have run properly
[Fri Sep 30 15:28:16 2011] Spatial fit model total counts = 28.242200, observed total counts = 30.000000
[Fri Sep 30 15:28:16 2011] Offset between fit and detection position for source 65 = 0.022392 pixels
[Fri Sep 30 15:28:16 2011] 26.656870 total counts/ 6.308070 bgd. counts: snr = 8.101969
Spatial fit parameters:
  Offset between fit and detection position for source 65 = 0.022392 pixels
  Position = (835.0, 92.3) = 20 33 10.07 41 14 14.4
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 20.3 +/- 5.2
  Background counts = 6.3
  Rate = 0.0007 +/- 0.0002
[Fri Sep 30 15:28:16 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:28:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:28:16 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:28:16 2011] Source does appear to be extended
[Fri Sep 30 15:28:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:37:05 2011] Not overwriting source region fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src65_src.reg
[Fri Sep 30 15:37:05 2011] Extracting stamp from image fullrun_ccd2_acisf10956_pi14-548_cl_sm2.00.img.gz, (816, 73) - (854, 111)
[Fri Sep 30 15:37:05 2011] Writing fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src65.gif
[Fri Sep 30 15:39:21 2011] ../../acisf10956/products/events/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src65_src.evt and ../../acisf10956/products/events/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src65_bgd.evt exist, delete to re-create
[Fri Sep 30 15:39:21 2011] Size of ../../acisf10956/products/events/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src65_src.evt.gz[events] = 22 counts
[Fri Sep 30 15:39:21 2011] Mean chipx,y = (49.68, 915.50)
[Fri Sep 30 15:39:21 2011] Mean tdetx,y = (3976.50, 4036.32)
[Fri Sep 30 15:39:21 2011] chipx,y range = (34.00-67.00, 899.00-932.00)
[Fri Sep 30 15:39:21 2011] Size of ../../acisf10956/products/events/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src65_bgd.evt.gz[events] = 8 counts
[Fri Sep 30 15:39:21 2011] ../../acisf10956/products/images/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src65_src.img and ../../acisf10956/products/images/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src65_bgd.img exist, delete to re-create
[Fri Sep 30 15:39:21 2011] ../../acisf10956/products/spectra/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src65_src.pi and ../../acisf10956/products/spectra/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src65_bgd.pi exist, delete to re-create
[Fri Sep 30 15:39:21 2011] Not generating rmf since there are only 20 counts
[Fri Sep 30 15:39:24 2011] ../../acisf10956/products/lightcurves/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src65_src.lc and ../../acisf10956/products/lightcurves/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src65_bgd.lc exist, delete to re-create
[Fri Sep 30 15:42:37 2011] 201.734
[Fri Sep 30 15:45:07 2011] Updating aperture counts using extracted products
[Fri Sep 30 15:45:07 2011] Error reading totcts from fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src65_src.pi.gz
[Fri Sep 30 15:45:08 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 15:45:08 2011] Using photon index=1.80, rate=0.000735, arf fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src65.arf
[Fri Sep 30 15:45:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 15:45:08 2011] Updating source flux to 1.1e-14
[Fri Sep 30 15:45:42 2011] Source 65 has fewer than 100.000000 counts, skipping spectral fitting