[Fri Sep 30 15:23:20 2011] Detection parameters:
  Position = (262.1, 916.8) = 20 33 35.09 41 21 0.0
  Extent = 3.2" x 1.2", rotation angle = 167 degrees
  Source counts = 13.9 +/- 4.8
  Background counts = 9.1
  Rate = 0.0005 +/- 0.0002

[Fri Sep 30 15:23:23 2011] Off-axis axis estimate = 9.06'
[Fri Sep 30 15:25:32 2011] Using EEF radius (= 3.63 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:25:32 2011] Initial guess for spatial extent in simple fitting = 3.63"
[Fri Sep 30 15:25:32 2011] source mask rpix=7.4, npix_max = 248, mask sum = 225, frac = 0.907
[Fri Sep 30 15:25:32 2011] Giving source the simple spatial ID 51 for pass 0, mean size = 3.63"
[Fri Sep 30 15:25:41 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass0_src51.ximg exists
[Fri Sep 30 15:25:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10956_pi14-548_cl_pass0_src51.csv
[Fri Sep 30 15:25:41 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass0_src51_1.ximg exists
[Fri Sep 30 15:25:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10956_pi14-548_cl_pass0_src51.csv
[Fri Sep 30 15:25:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10956_pi14-548_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10956_pi14-548_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:25:44 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass0_tfrozen_src51.ximg exists
[Fri Sep 30 15:25:44 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass0_tfrozen_src51_1.ximg exists
[Fri Sep 30 15:25:44 2011] Fit fullrun_ccd2_acisf10956_pi14-548_cl_pass0_tfrozen_src51 appears to have run properly
[Fri Sep 30 15:26:32 2011] Spatial fit model total counts = 46.011900, observed total counts = 48.000000
[Fri Sep 30 15:26:32 2011] Offset between fit and detection position for source 64 = 7.501982 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 64 = 7.501982 pixels
  Position = (267.1, 922.4) = 20 33 34.90 41 21 2.5
  Extent = 4.9 (2.5-7.0)", rotation angle = 0
  Source counts = 43.8 +/- 6.6
  Background counts = 0.0
  Rate = 0.002 +/- 0.0002
[Fri Sep 30 15:26:32 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:26:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:26:32 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:26:32 2011] Source does appear to be extended
[Fri Sep 30 15:26:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:27:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:27:29 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 15:27:29 2011] Initial guess for spatial extent in simple fitting = 4.92"
[Fri Sep 30 15:27:29 2011] source mask rpix=10.0, npix_max = 441, mask sum = 435, frac = 0.985
[Fri Sep 30 15:27:29 2011] Giving source the simple spatial ID 51 for pass 1, mean size = 4.92"
[Fri Sep 30 15:27:31 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src51.ximg exists
[Fri Sep 30 15:27:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src51.csv
[Fri Sep 30 15:27:31 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src51_1.ximg exists
[Fri Sep 30 15:27:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src51.csv
[Fri Sep 30 15:27:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:27:33 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass1_tfrozen_src51.ximg exists
[Fri Sep 30 15:27:33 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass1_tfrozen_src51_1.ximg exists
[Fri Sep 30 15:27:33 2011] Fit fullrun_ccd2_acisf10956_pi14-548_cl_pass1_tfrozen_src51 appears to have run properly
[Fri Sep 30 15:28:16 2011] Spatial fit model total counts = 65.335800, observed total counts = 62.000000
[Fri Sep 30 15:28:16 2011] Offset between fit and detection position for source 64 = 6.448017 pixels
[Fri Sep 30 15:28:16 2011] 64.220900 total counts/ 45.253900 bgd. counts: snr = 2.819491
Spatial fit parameters:
  Offset between fit and detection position for source 64 = 6.448017 pixels
  Position = (262.5, 917.9) = 20 33 35.10 41 21 0.3
  Extent = 3.9 (1.2-5.9)", rotation angle = 0
  Source counts = 19.0 +/- 8.0
  Background counts = 45.3
  Rate = 0.0007 +/- 0.0003
[Fri Sep 30 15:28:16 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:28:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:28:16 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:28:16 2011] Source does appear to be extended
[Fri Sep 30 15:28:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:37:05 2011] Not overwriting source region fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src64_src.reg
[Fri Sep 30 15:37:05 2011] Extracting stamp from image fullrun_ccd2_acisf10956_pi14-548_cl_sm2.00.img.gz, (86, 741) - (439, 1095)
[Fri Sep 30 15:37:05 2011] Writing fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src64.gif
[Fri Sep 30 15:40:22 2011] ../../acisf10956/products/events/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src64_src.evt and ../../acisf10956/products/events/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src64_bgd.evt exist, delete to re-create
[Fri Sep 30 15:40:22 2011] Size of ../../acisf10956/products/events/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src64_src.evt.gz[events] = 68 counts
[Fri Sep 30 15:40:22 2011] Mean chipx,y = (514.31, 27.28)
[Fri Sep 30 15:40:22 2011] Mean tdetx,y = (3088.28, 3571.69)
[Fri Sep 30 15:40:22 2011] chipx,y range = (480.00-550.00, 4.00-61.00)
[Fri Sep 30 15:40:22 2011] Size of ../../acisf10956/products/events/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src64_bgd.evt.gz[events] = 289 counts
[Fri Sep 30 15:40:22 2011] ../../acisf10956/products/images/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src64_src.img and ../../acisf10956/products/images/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src64_bgd.img exist, delete to re-create
[Fri Sep 30 15:40:22 2011] ../../acisf10956/products/spectra/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src64_src.pi and ../../acisf10956/products/spectra/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src64_bgd.pi exist, delete to re-create
[Fri Sep 30 15:40:22 2011] Not generating rmf since there are only 18 counts
[Fri Sep 30 15:40:24 2011] ../../acisf10956/products/lightcurves/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src64_src.lc and ../../acisf10956/products/lightcurves/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src64_bgd.lc exist, delete to re-create
[Fri Sep 30 15:42:37 2011] 133.694
[Fri Sep 30 15:45:07 2011] Updating aperture counts using extracted products
[Fri Sep 30 15:45:07 2011] Error reading totcts from fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src64_src.pi.gz
[Fri Sep 30 15:45:08 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 15:45:08 2011] Using photon index=1.80, rate=0.000685, arf fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src64.arf
[Fri Sep 30 15:45:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 15:45:08 2011] Updating source flux to 1.5e-14
[Fri Sep 30 15:45:42 2011] Source 64 has fewer than 100.000000 counts, skipping spectral fitting