[Fri Sep 30 15:23:19 2011] Detection parameters:
  Position = (904.8, 670.9) = 20 33 7.01 41 18 59.3
  Extent = 1.0" x 0.5", rotation angle = 154 degrees
  Source counts = 12.8 +/- 3.9
  Background counts = 2.2
  Rate = 0.0005 +/- 0.0001

[Fri Sep 30 15:23:23 2011] Off-axis axis estimate = 5.03'
[Fri Sep 30 15:25:32 2011] Using EEF radius (= 1.19 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:25:32 2011] Initial guess for spatial extent in simple fitting = 1.19"
[Fri Sep 30 15:25:32 2011] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.054
[Fri Sep 30 15:25:32 2011] Giving source the simple spatial ID 55 for pass 0, mean size = 1.19"
[Fri Sep 30 15:25:41 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass0_src55.ximg exists
[Fri Sep 30 15:25:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10956_pi14-548_cl_pass0_src55.csv
[Fri Sep 30 15:25:41 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass0_src55_1.ximg exists
[Fri Sep 30 15:25:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10956_pi14-548_cl_pass0_src55.csv
[Fri Sep 30 15:25:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10956_pi14-548_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10956_pi14-548_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:25:44 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass0_tfrozen_src55.ximg exists
[Fri Sep 30 15:25:44 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass0_tfrozen_src55_1.ximg exists
[Fri Sep 30 15:25:44 2011] Fit fullrun_ccd2_acisf10956_pi14-548_cl_pass0_tfrozen_src55 appears to have run properly
[Fri Sep 30 15:26:32 2011] Spatial fit model total counts = 18.756000, observed total counts = 19.000000
[Fri Sep 30 15:26:32 2011] Offset between fit and detection position for source 52 = 0.633216 pixels
[Fri Sep 30 15:26:32 2011] 18.000890 total counts/ 6.249990 bgd. counts: snr = 4.700364
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 0.633216 pixels
  Position = (905.0, 671.5) = 20 33 7.02 41 18 59.3
  Extent = 0.8 (0.4-1.3)", rotation angle = 0
  Source counts = 11.8 +/- 4.2
  Background counts = 6.2
  Rate = 0.0004 +/- 0.0002
[Fri Sep 30 15:26:32 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:26:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:26:32 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:26:32 2011] Source does appear to be extended
[Fri Sep 30 15:26:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:27:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:27:29 2011] Initial guess for spatial extent in simple fitting = 0.81"
[Fri Sep 30 15:27:29 2011] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.082
[Fri Sep 30 15:27:29 2011] Giving source the simple spatial ID 55 for pass 1, mean size = 0.81"
[Fri Sep 30 15:27:31 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src55.ximg exists
[Fri Sep 30 15:27:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src55.csv
[Fri Sep 30 15:27:31 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src55_1.ximg exists
[Fri Sep 30 15:27:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src55.csv
[Fri Sep 30 15:27:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:27:33 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass1_tfrozen_src55.ximg exists
[Fri Sep 30 15:27:33 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass1_tfrozen_src55_1.ximg exists
[Fri Sep 30 15:27:33 2011] Fit fullrun_ccd2_acisf10956_pi14-548_cl_pass1_tfrozen_src55 appears to have run properly
[Fri Sep 30 15:28:16 2011] Spatial fit model total counts = 18.355800, observed total counts = 19.000000
[Fri Sep 30 15:28:16 2011] Offset between fit and detection position for source 52 = 0.018225 pixels
[Fri Sep 30 15:28:16 2011] 17.563560 total counts/ 6.141960 bgd. counts: snr = 4.608647
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 0.018225 pixels
  Position = (905.0, 671.5) = 20 33 7.02 41 18 59.3
  Extent = 0.8 (0.4-1.4)", rotation angle = 0
  Source counts = 11.4 +/- 4.2
  Background counts = 6.1
  Rate = 0.0004 +/- 0.0002
[Fri Sep 30 15:28:16 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:28:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:28:16 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:28:16 2011] Source does appear to be extended
[Fri Sep 30 15:28:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:37:05 2011] Not overwriting source region fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src52_src.reg
[Fri Sep 30 15:37:05 2011] Extracting stamp from image fullrun_ccd2_acisf10956_pi14-548_cl_sm2.00.img.gz, (868, 635) - (942, 708)
[Fri Sep 30 15:37:05 2011] Writing fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src52.gif
[Fri Sep 30 15:40:33 2011] ../../acisf10956/products/events/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src52_src.evt and ../../acisf10956/products/events/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src52_bgd.evt exist, delete to re-create
[Fri Sep 30 15:40:33 2011] Size of ../../acisf10956/products/events/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src52_src.evt.gz[events] = 15 counts
[Fri Sep 30 15:40:33 2011] Mean chipx,y = (601.27, 711.00)
[Fri Sep 30 15:40:33 2011] Mean tdetx,y = (3772.00, 3484.73)
[Fri Sep 30 15:40:33 2011] chipx,y range = (583.00-615.00, 691.00-729.00)
[Fri Sep 30 15:40:33 2011] Size of ../../acisf10956/products/events/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src52_bgd.evt.gz[events] = 30 counts
[Fri Sep 30 15:40:33 2011] ../../acisf10956/products/images/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src52_src.img and ../../acisf10956/products/images/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src52_bgd.img exist, delete to re-create
[Fri Sep 30 15:40:33 2011] ../../acisf10956/products/spectra/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src52_src.pi and ../../acisf10956/products/spectra/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src52_bgd.pi exist, delete to re-create
[Fri Sep 30 15:40:33 2011] Not generating rmf since there are only 11 counts
[Fri Sep 30 15:40:37 2011] ../../acisf10956/products/lightcurves/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src52_src.lc and ../../acisf10956/products/lightcurves/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src52_bgd.lc exist, delete to re-create
[Fri Sep 30 15:42:37 2011] 179.356
[Fri Sep 30 15:45:07 2011] Updating aperture counts using extracted products
[Fri Sep 30 15:45:07 2011] Error reading totcts from fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src52_src.pi.gz
[Fri Sep 30 15:45:08 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 15:45:08 2011] Using photon index=1.80, rate=0.000413, arf fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src52.arf
[Fri Sep 30 15:45:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 15:45:08 2011] Updating source flux to 6.9e-15
[Fri Sep 30 15:45:42 2011] Source 52 has fewer than 100.000000 counts, skipping spectral fitting