[Fri Sep 30 15:23:18 2011] Detection parameters:
  Position = (627.7, 427.8) = 20 33 19.10 41 16 59.6
  Extent = 0.5" x 0.5", rotation angle = 36 degrees
  Source counts = 17.5 +/- 4.5
  Background counts = 2.5
  Rate = 0.0006 +/- 0.0002

[Fri Sep 30 15:23:23 2011] Off-axis axis estimate = 4.06'
[Fri Sep 30 15:25:32 2011] Using EEF radius (= 0.85 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:25:32 2011] Initial guess for spatial extent in simple fitting = 0.85"
[Fri Sep 30 15:25:32 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.008
[Fri Sep 30 15:25:32 2011] Giving source the simple spatial ID 41 for pass 0, mean size = 0.85"
[Fri Sep 30 15:25:37 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass0_src41.ximg exists
[Fri Sep 30 15:25:37 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass0_src41_1.ximg exists
[Fri Sep 30 15:25:37 2011] Fit fullrun_ccd2_acisf10956_pi14-548_cl_pass0_src41 appears to have run properly
[Fri Sep 30 15:25:44 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass0_tfrozen_src41.ximg exists
[Fri Sep 30 15:25:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10956_pi14-548_cl_pass0_tfrozen_src41.csv
[Fri Sep 30 15:25:44 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass0_tfrozen_src41_1.ximg exists
[Fri Sep 30 15:25:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10956_pi14-548_cl_pass0_tfrozen_src41.csv
[Fri Sep 30 15:25:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10956_pi14-548_cl_pass0_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10956_pi14-548_cl_pass0_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:26:32 2011] Spatial fit model total counts = 19.818400, observed total counts = 23.000000
[Fri Sep 30 15:26:32 2011] Offset between fit and detection position for source 46 = 0.635525 pixels
[Fri Sep 30 15:26:32 2011] 19.027070 total counts/ 0.006670 bgd. counts: snr = 232.884778
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 0.635525 pixels
  Position = (628.1, 428.3) = 20 33 19.11 41 16 59.6
  Extent = 0.9 (0.8-1.2)", rotation angle = 0
  Source counts = 19.0 +/- 4.4
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0002
[Fri Sep 30 15:26:32 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:26:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:26:32 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:26:32 2011] Source does appear to be extended
[Fri Sep 30 15:26:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:27:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:27:29 2011] Initial guess for spatial extent in simple fitting = 0.88"
[Fri Sep 30 15:27:29 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.948
[Fri Sep 30 15:27:29 2011] Giving source the simple spatial ID 41 for pass 1, mean size = 0.88"
[Fri Sep 30 15:27:30 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src41.ximg exists
[Fri Sep 30 15:27:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src41.csv
[Fri Sep 30 15:27:30 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src41_1.ximg exists
[Fri Sep 30 15:27:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src41.csv
[Fri Sep 30 15:27:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:27:32 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass1_tfrozen_src41.ximg exists
[Fri Sep 30 15:27:32 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass1_tfrozen_src41_1.ximg exists
[Fri Sep 30 15:27:32 2011] Fit fullrun_ccd2_acisf10956_pi14-548_cl_pass1_tfrozen_src41 appears to have run properly
[Fri Sep 30 15:28:16 2011] Spatial fit model total counts = 22.796300, observed total counts = 23.000000
[Fri Sep 30 15:28:16 2011] Offset between fit and detection position for source 46 = 0.145967 pixels
[Fri Sep 30 15:28:16 2011] 23.022050 total counts/ 5.383550 bgd. counts: snr = 7.601990
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 0.145967 pixels
  Position = (628.0, 428.3) = 20 33 19.11 41 16 59.6
  Extent = 0.8 (0.4-1.2)", rotation angle = 0
  Source counts = 17.6 +/- 4.8
  Background counts = 5.4
  Rate = 0.0006 +/- 0.0002
[Fri Sep 30 15:28:16 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:28:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:28:16 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:28:16 2011] Source does appear to be extended
[Fri Sep 30 15:28:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:37:05 2011] Not overwriting source region fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src46_src.reg
[Fri Sep 30 15:37:05 2011] Extracting stamp from image fullrun_ccd2_acisf10956_pi14-548_cl_sm2.00.img.gz, (591, 391) - (665, 466)
[Fri Sep 30 15:37:05 2011] Writing fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src46.gif
[Fri Sep 30 15:39:45 2011] ../../acisf10956/products/events/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src46_src.evt and ../../acisf10956/products/events/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src46_bgd.evt exist, delete to re-create
[Fri Sep 30 15:39:45 2011] Size of ../../acisf10956/products/events/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src46_src.evt.gz[events] = 20 counts
[Fri Sep 30 15:39:45 2011] Mean chipx,y = (252.30, 576.50)
[Fri Sep 30 15:39:45 2011] Mean tdetx,y = (3637.50, 3833.70)
[Fri Sep 30 15:39:45 2011] chipx,y range = (237.00-270.00, 560.00-595.00)
[Fri Sep 30 15:39:46 2011] Size of ../../acisf10956/products/events/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src46_bgd.evt.gz[events] = 40 counts
[Fri Sep 30 15:39:46 2011] ../../acisf10956/products/images/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src46_src.img and ../../acisf10956/products/images/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src46_bgd.img exist, delete to re-create
[Fri Sep 30 15:39:46 2011] ../../acisf10956/products/spectra/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src46_src.pi and ../../acisf10956/products/spectra/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src46_bgd.pi exist, delete to re-create
[Fri Sep 30 15:39:46 2011] Not generating rmf since there are only 17 counts
[Fri Sep 30 15:39:51 2011] ../../acisf10956/products/lightcurves/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src46_src.lc and ../../acisf10956/products/lightcurves/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src46_bgd.lc exist, delete to re-create
[Fri Sep 30 15:42:37 2011] 179.616
[Fri Sep 30 15:45:07 2011] Updating aperture counts using extracted products
[Fri Sep 30 15:45:07 2011] Error reading totcts from fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src46_src.pi.gz
[Fri Sep 30 15:45:08 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 15:45:08 2011] Using photon index=1.80, rate=0.000637, arf fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src46.arf
[Fri Sep 30 15:45:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 15:45:08 2011] Updating source flux to 1.1e-14
[Fri Sep 30 15:45:42 2011] Source 46 has fewer than 100.000000 counts, skipping spectral fitting