[Fri Sep 30 15:23:18 2011] Detection parameters:
  Position = (790.1, 406.9) = 20 33 12.02 41 16 49.4
  Extent = 0.6" x 0.5", rotation angle = 7 degrees
  Source counts = 12.4 +/- 3.7
  Background counts = 1.6
  Rate = 0.0004 +/- 0.0001

[Fri Sep 30 15:23:23 2011] Off-axis axis estimate = 3.17'
[Fri Sep 30 15:25:32 2011] Using EEF radius (= 0.61 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:25:32 2011] Initial guess for spatial extent in simple fitting = 0.61"
[Fri Sep 30 15:25:32 2011] source mask rpix=1.2, npix_max = 12, mask sum = 16, frac = 1.307
[Fri Sep 30 15:25:32 2011] Giving source the simple spatial ID 58 for pass 0, mean size = 0.61"
[Fri Sep 30 15:25:41 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass0_src58.ximg exists
[Fri Sep 30 15:25:41 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass0_src58_1.ximg exists
[Fri Sep 30 15:25:41 2011] Fit fullrun_ccd2_acisf10956_pi14-548_cl_pass0_src58 appears to have run properly
[Fri Sep 30 15:25:44 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass0_tfrozen_src58.ximg exists
[Fri Sep 30 15:25:44 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass0_tfrozen_src58_1.ximg exists
[Fri Sep 30 15:25:44 2011] Fit fullrun_ccd2_acisf10956_pi14-548_cl_pass0_tfrozen_src58 appears to have run properly
[Fri Sep 30 15:26:32 2011] Spatial fit model total counts = 20.475100, observed total counts = 21.000000
[Fri Sep 30 15:26:32 2011] Offset between fit and detection position for source 45 = 0.942199 pixels
[Fri Sep 30 15:26:32 2011] 20.778220 total counts/ 8.685220 bgd. counts: snr = 4.103398
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 0.942199 pixels
  Position = (790.7, 407.6) = 20 33 12.01 41 16 49.5
  Extent = 0.9 (0.6-1.5)" x 0.3 (0.2-0.5)", rotation angle = 357 (343-14) degrees
  Source counts = 12.1 +/- 4.6
  Background counts = 8.7
  Rate = 0.0004 +/- 0.0002
[Fri Sep 30 15:26:32 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:26:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:26:32 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:26:32 2011] Source does appear to be extended
[Fri Sep 30 15:26:32 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.33
[Fri Sep 30 15:27:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:27:29 2011] Initial guess for spatial extent in simple fitting = 0.61"
[Fri Sep 30 15:27:29 2011] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.750
[Fri Sep 30 15:27:29 2011] Giving source the simple spatial ID 58 for pass 1, mean size = 0.61"
[Fri Sep 30 15:27:31 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src58.ximg exists
[Fri Sep 30 15:27:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src58.csv
[Fri Sep 30 15:27:31 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src58_1.ximg exists
[Fri Sep 30 15:27:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src58.csv
[Fri Sep 30 15:27:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:27:33 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass1_tfrozen_src58.ximg exists
[Fri Sep 30 15:27:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10956_pi14-548_cl_pass1_tfrozen_src58.csv
[Fri Sep 30 15:27:33 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass1_tfrozen_src58_1.ximg exists
[Fri Sep 30 15:27:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10956_pi14-548_cl_pass1_tfrozen_src58.csv
[Fri Sep 30 15:27:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10956_pi14-548_cl_pass1_tfrozen_src58_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10956_pi14-548_cl_pass1_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:28:16 2011] Spatial fit model total counts = 19.750300, observed total counts = 24.000000
[Fri Sep 30 15:28:16 2011] Offset between fit and detection position for source 45 = 0.342801 pixels
[Fri Sep 30 15:28:16 2011] 21.524100 total counts/ 10.161900 bgd. counts: snr = 3.564306
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 0.342801 pixels
  Position = (790.4, 407.6) = 20 33 12.02 41 16 49.5
  Extent = 1.0 (0.6-1.3)" x 0.3 (0.2-0.5)", rotation angle = 177 (164-196) degrees
  Source counts = 11.4 +/- 4.6
  Background counts = 10.2
  Rate = 0.0004 +/- 0.0002
[Fri Sep 30 15:28:16 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:28:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:28:16 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:28:16 2011] Source does appear to be extended
[Fri Sep 30 15:28:16 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.25
[Fri Sep 30 15:37:05 2011] Not overwriting source region fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src45_src.reg
[Fri Sep 30 15:37:05 2011] Extracting stamp from image fullrun_ccd2_acisf10956_pi14-548_cl_sm2.00.img.gz, (746, 363) - (835, 452)
[Fri Sep 30 15:37:05 2011] Writing fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src45.gif
[Fri Sep 30 15:40:46 2011] ../../acisf10956/products/events/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src45_src.evt and ../../acisf10956/products/events/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src45_bgd.evt exist, delete to re-create
[Fri Sep 30 15:40:46 2011] Size of ../../acisf10956/products/events/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src45_src.evt.gz[events] = 15 counts
[Fri Sep 30 15:40:46 2011] Mean chipx,y = (310.40, 730.47)
[Fri Sep 30 15:40:46 2011] Mean tdetx,y = (3791.47, 3775.60)
[Fri Sep 30 15:40:46 2011] chipx,y range = (294.00-329.00, 713.00-751.00)
[Fri Sep 30 15:40:46 2011] Size of ../../acisf10956/products/events/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src45_bgd.evt.gz[events] = 48 counts
[Fri Sep 30 15:40:46 2011] ../../acisf10956/products/images/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src45_src.img and ../../acisf10956/products/images/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src45_bgd.img exist, delete to re-create
[Fri Sep 30 15:40:46 2011] ../../acisf10956/products/spectra/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src45_src.pi and ../../acisf10956/products/spectra/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src45_bgd.pi exist, delete to re-create
[Fri Sep 30 15:40:46 2011] Not generating rmf since there are only 11 counts
[Fri Sep 30 15:40:48 2011] ../../acisf10956/products/lightcurves/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src45_src.lc and ../../acisf10956/products/lightcurves/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src45_bgd.lc exist, delete to re-create
[Fri Sep 30 15:42:37 2011] 190.809
[Fri Sep 30 15:45:07 2011] Updating aperture counts using extracted products
[Fri Sep 30 15:45:07 2011] Error reading totcts from fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src45_src.pi.gz
[Fri Sep 30 15:45:08 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 15:45:08 2011] Using photon index=1.80, rate=0.00041, arf fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src45.arf
[Fri Sep 30 15:45:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 15:45:08 2011] Updating source flux to 6.5e-15
[Fri Sep 30 15:45:42 2011] Source 45 has fewer than 100.000000 counts, skipping spectral fitting