[Fri Sep 30 15:23:16 2011] Detection parameters:
  Position = (820.8, 528.7) = 20 33 10.68 41 17 49.3
  Extent = 1.0" x 0.5", rotation angle = 166 degrees
  Source counts = 40.5 +/- 6.6
  Background counts = 3.5
  Rate = 0.001 +/- 0.0002

[Fri Sep 30 15:23:23 2011] Off-axis axis estimate = 4.01'
[Fri Sep 30 15:25:32 2011] Using EEF radius (= 0.83 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:25:32 2011] Initial guess for spatial extent in simple fitting = 0.83"
[Fri Sep 30 15:25:32 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.040
[Fri Sep 30 15:25:32 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.83"
[Fri Sep 30 15:25:36 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass0_src11.ximg exists
[Fri Sep 30 15:25:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10956_pi14-548_cl_pass0_src11.csv
[Fri Sep 30 15:25:36 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass0_src11_1.ximg exists
[Fri Sep 30 15:25:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10956_pi14-548_cl_pass0_src11.csv
[Fri Sep 30 15:25:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10956_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10956_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:25:42 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Fri Sep 30 15:25:42 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Sep 30 15:25:42 2011] Fit fullrun_ccd2_acisf10956_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Sep 30 15:26:32 2011] Spatial fit model total counts = 48.352900, observed total counts = 49.000000
[Fri Sep 30 15:26:32 2011] Offset between fit and detection position for source 11 = 1.097982 pixels
[Fri Sep 30 15:26:32 2011] 47.462560 total counts/ 8.338160 bgd. counts: snr = 13.549166
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.097982 pixels
  Position = (821.8, 529.1) = 20 33 10.65 41 17 49.3
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 39.1 +/- 6.9
  Background counts = 8.3
  Rate = 0.001 +/- 0.0002
[Fri Sep 30 15:26:32 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:26:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:26:32 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:26:32 2011] Source does appear to be extended
[Fri Sep 30 15:26:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:27:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:27:29 2011] Initial guess for spatial extent in simple fitting = 0.85"
[Fri Sep 30 15:27:29 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.801
[Fri Sep 30 15:27:29 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.85"
[Fri Sep 30 15:27:30 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src11.ximg exists
[Fri Sep 30 15:27:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src11.csv
[Fri Sep 30 15:27:30 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src11_1.ximg exists
[Fri Sep 30 15:27:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src11.csv
[Fri Sep 30 15:27:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10956_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:27:32 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Fri Sep 30 15:27:32 2011] fullrun_ccd2_acisf10956_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Sep 30 15:27:32 2011] Fit fullrun_ccd2_acisf10956_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Sep 30 15:28:16 2011] Spatial fit model total counts = 49.935600, observed total counts = 50.000000
[Fri Sep 30 15:28:16 2011] Offset between fit and detection position for source 11 = 0.089914 pixels
[Fri Sep 30 15:28:16 2011] 49.901600 total counts/ 12.721000 bgd. counts: snr = 10.424513
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.089914 pixels
  Position = (821.7, 529.0) = 20 33 10.66 41 17 49.2
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 37.2 +/- 7.1
  Background counts = 12.7
  Rate = 0.001 +/- 0.0003
[Fri Sep 30 15:28:16 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:28:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:28:16 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:28:16 2011] Source does appear to be extended
[Fri Sep 30 15:28:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:37:04 2011] Not overwriting source region fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src11_src.reg
[Fri Sep 30 15:37:04 2011] Extracting stamp from image fullrun_ccd2_acisf10956_pi14-548_cl_sm2.00.img.gz, (784, 491) - (859, 567)
[Fri Sep 30 15:37:04 2011] Writing fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src11.gif
[Fri Sep 30 15:37:58 2011] ../../acisf10956/products/events/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src11_src.evt and ../../acisf10956/products/events/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Fri Sep 30 15:37:58 2011] Size of ../../acisf10956/products/events/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src11_src.evt.gz[events] = 43 counts
[Fri Sep 30 15:37:58 2011] Mean chipx,y = (437.56, 701.56)
[Fri Sep 30 15:37:58 2011] Mean tdetx,y = (3762.56, 3648.44)
[Fri Sep 30 15:37:58 2011] chipx,y range = (415.00-450.00, 681.00-719.00)
[Fri Sep 30 15:37:58 2011] Size of ../../acisf10956/products/events/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 33 counts
[Fri Sep 30 15:37:58 2011] ../../acisf10956/products/images/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src11_src.img and ../../acisf10956/products/images/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Fri Sep 30 15:37:58 2011] ../../acisf10956/products/spectra/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src11_src.pi and ../../acisf10956/products/spectra/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Fri Sep 30 15:37:58 2011] Not generating rmf since there are only 37 counts
[Fri Sep 30 15:38:00 2011] ../../acisf10956/products/lightcurves/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src11_src.lc and ../../acisf10956/products/lightcurves/fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Fri Sep 30 15:42:36 2011] 182.364
[Fri Sep 30 15:45:07 2011] Updating aperture counts using extracted products
[Fri Sep 30 15:45:07 2011] Error reading totcts from fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src11_src.pi.gz
[Fri Sep 30 15:45:08 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 15:45:08 2011] Using photon index=1.80, rate=0.00134, arf fullrun_ccd2_acisf10956_pi14-548_pass1_cl_src11.arf
[Fri Sep 30 15:45:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 15:45:08 2011] Updating source flux to 2.2e-14
[Fri Sep 30 15:45:42 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting