[Fri Sep 30 15:23:14 2011] Detection parameters:
  Position = (997.4, 450.7) = 20 32 43.87 41 5 34.7
  Extent = 0.7" x 0.6", rotation angle = 95 degrees
  Source counts = 688.8 +/- 28.4
  Background counts = 116.2
  Rate = 0.02 +/- 0.001

[Fri Sep 30 15:23:14 2011] Off-axis axis estimate = 9.26'
[Fri Sep 30 15:25:24 2011] Using EEF radius (= 3.79 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:25:24 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 15:25:24 2011] Initial guess for spatial extent in simple fitting = 3.79"
[Fri Sep 30 15:25:24 2011] source mask rpix=7.7, npix_max = 269, mask sum = 278, frac = 1.031
[Fri Sep 30 15:25:24 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.79"
[Fri Sep 30 15:25:25 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 30 15:25:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10956_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 15:25:25 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 30 15:25:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10956_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 15:25:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10956_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10956_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:25:30 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 15:25:30 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 15:25:30 2011] Fit fullrun_ccd1_acisf10956_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 30 15:26:19 2011] Spatial fit model total counts = 914.767000, observed total counts = 910.000000
[Fri Sep 30 15:26:19 2011] Offset between fit and detection position for source 85 = 0.931662 pixels
[Fri Sep 30 15:26:19 2011] 914.624000 total counts/ 215.025000 bgd. counts: snr = 47.709482
Spatial fit parameters:
  Offset between fit and detection position for source 85 = 0.931662 pixels
  Position = (997.6, 451.6) = 20 32 43.88 41 5 34.9
  Extent = 2.9 (2.8-3.1)", rotation angle = 0
  Source counts = 699.6 +/- 30.2
  Background counts = 215.0
  Rate = 0.03 +/- 0.001
[Fri Sep 30 15:26:19 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:26:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:26:19 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:26:19 2011] Source does appear to be extended
[Fri Sep 30 15:26:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:27:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:27:25 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 15:27:25 2011] Initial guess for spatial extent in simple fitting = 2.93"
[Fri Sep 30 15:27:25 2011] source mask rpix=6.0, npix_max = 166, mask sum = 163, frac = 0.976
[Fri Sep 30 15:27:25 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.93"
[Fri Sep 30 15:27:26 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 30 15:27:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10956_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 15:27:26 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 30 15:27:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10956_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 15:27:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10956_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10956_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:27:27 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 15:27:27 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 15:27:27 2011] Fit fullrun_ccd1_acisf10956_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 30 15:28:07 2011] Spatial fit model total counts = 860.250000, observed total counts = 857.000000
[Fri Sep 30 15:28:07 2011] Offset between fit and detection position for source 85 = 0.109601 pixels
[Fri Sep 30 15:28:07 2011] 859.604000 total counts/ 205.697000 bgd. counts: snr = 45.593403
Spatial fit parameters:
  Offset between fit and detection position for source 85 = 0.109601 pixels
  Position = (997.7, 451.6) = 20 32 43.87 41 5 34.9
  Extent = 2.7 (2.6-3.0)", rotation angle = 0
  Source counts = 653.9 +/- 29.3
  Background counts = 205.7
  Rate = 0.02 +/- 0.001
[Fri Sep 30 15:28:07 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:28:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:28:07 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:28:07 2011] Source does appear to be extended
[Fri Sep 30 15:28:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:32:33 2011] Not overwriting source region fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src85_src.reg
[Fri Sep 30 15:32:33 2011] Extracting stamp from image fullrun_ccd1_acisf10956_pi14-548_cl_sm2.00.img.gz, (873, 327) - (1123, 576)
[Fri Sep 30 15:32:33 2011] Writing fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src85.gif
[Fri Sep 30 15:32:40 2011] ../../acisf10956/products/events/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src85_src.evt and ../../acisf10956/products/events/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src85_bgd.evt exist, delete to re-create
[Fri Sep 30 15:32:40 2011] Size of ../../acisf10956/products/events/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src85_src.evt.gz[events] = 797 counts
[Fri Sep 30 15:32:40 2011] Mean chipx,y = (589.71, 132.31)
[Fri Sep 30 15:32:40 2011] Mean tdetx,y = (4999.69, 4696.71)
[Fri Sep 30 15:32:40 2011] chipx,y range = (554.00-624.00, 98.00-169.00)
[Fri Sep 30 15:32:40 2011] Size of ../../acisf10956/products/events/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src85_bgd.evt.gz[events] = 506 counts
[Fri Sep 30 15:32:40 2011] ../../acisf10956/products/images/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src85_src.img and ../../acisf10956/products/images/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src85_bgd.img exist, delete to re-create
[Fri Sep 30 15:32:40 2011] ../../acisf10956/products/spectra/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src85_src.pi and ../../acisf10956/products/spectra/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src85_bgd.pi exist, delete to re-create
[Fri Sep 30 15:32:46 2011] ../../acisf10956/products/lightcurves/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src85_src.lc and ../../acisf10956/products/lightcurves/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src85_bgd.lc exist, delete to re-create
[Fri Sep 30 15:37:01 2011] Keeping rmf generated by specextract
[Fri Sep 30 15:37:01 2011] 165.691
[Fri Sep 30 15:45:05 2011] Updating aperture counts using extracted products
[Fri Sep 30 15:45:05 2011] Error reading totcts from fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src85_src.pi.gz
[Fri Sep 30 15:45:06 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 15:45:06 2011] Using photon index=1.80, rate=0.0236, arf fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src85.arf
[Fri Sep 30 15:45:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 15:45:06 2011] Updating source flux to 4.2e-13
[Fri Sep 30 15:45:41 2011] Reading fit data from acisf10956/analysis//spectral/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src85_pl.csv
[Fri Sep 30 15:45:41 2011] Spectral fit parameter nH value = 1.57057e+22
[Fri Sep 30 15:45:41 2011] Spectral fit parameter PhoIndex value = 2.06757
[Fri Sep 30 15:45:41 2011] Failed to get F(0.3-8.0) from acisf10956/analysis//spectral/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src85_pl.csv, possibly due to different flux energy range selected
[Fri Sep 30 15:45:41 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 15:45:41 2011] Using Nh = 1.6e+22, photon index=2.07, rate=0.0236, arf fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src85.arf
[Fri Sep 30 15:45:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 15:45:42 2011] Updating source flux to 4.2e-13