[Fri Sep 30 15:23:06 2011] Detection parameters:
  Position = (472.6, 1234.2) = 20 33 6.71 41 12 0.3
  Extent = 0.5" x 0.5", rotation angle = 52 degrees
  Source counts = 23.1 +/- 5.0
  Background counts = 1.9
  Rate = 0.0008 +/- 0.0002

[Fri Sep 30 15:23:14 2011] Off-axis axis estimate = 2.01'
[Fri Sep 30 15:25:24 2011] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:25:24 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Fri Sep 30 15:25:24 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.187
[Fri Sep 30 15:25:24 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 0.43"
[Fri Sep 30 15:25:29 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass0_src25.ximg exists
[Fri Sep 30 15:25:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10956_pi14-548_cl_pass0_src25.csv
[Fri Sep 30 15:25:29 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass0_src25_1.ximg exists
[Fri Sep 30 15:25:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10956_pi14-548_cl_pass0_src25.csv
[Fri Sep 30 15:25:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10956_pi14-548_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10956_pi14-548_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:25:31 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass0_tfrozen_src25.ximg exists
[Fri Sep 30 15:25:31 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists
[Fri Sep 30 15:25:31 2011] Fit fullrun_ccd1_acisf10956_pi14-548_cl_pass0_tfrozen_src25 appears to have run properly
[Fri Sep 30 15:26:19 2011] Spatial fit model total counts = 34.769500, observed total counts = 36.000000
[Fri Sep 30 15:26:19 2011] Offset between fit and detection position for source 40 = 0.953591 pixels
[Fri Sep 30 15:26:19 2011] 34.317000 total counts/ 12.931800 bgd. counts: snr = 5.946807
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.953591 pixels
  Position = (473.2, 1234.9) = 20 33 6.70 41 12 0.4
  Extent = 0.3 (0.2-0.4)", rotation angle = 0
  Source counts = 21.4 +/- 5.9
  Background counts = 12.9
  Rate = 0.0008 +/- 0.0002
[Fri Sep 30 15:26:19 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:26:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:26:19 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:26:19 2011] Source does appear to be extended
[Fri Sep 30 15:26:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:27:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:27:25 2011] Initial guess for spatial extent in simple fitting = 0.34"
[Fri Sep 30 15:27:25 2011] source mask rpix=0.7, npix_max = 5, mask sum = 4, frac = 0.704
[Fri Sep 30 15:27:25 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 0.34"
[Fri Sep 30 15:27:26 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass1_src25.ximg exists
[Fri Sep 30 15:27:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10956_pi14-548_cl_pass1_src25.csv
[Fri Sep 30 15:27:26 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass1_src25_1.ximg exists
[Fri Sep 30 15:27:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10956_pi14-548_cl_pass1_src25.csv
[Fri Sep 30 15:27:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10956_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10956_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:27:28 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Fri Sep 30 15:27:28 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Fri Sep 30 15:27:28 2011] Fit fullrun_ccd1_acisf10956_pi14-548_cl_pass1_tfrozen_src25 appears to have run properly
[Fri Sep 30 15:28:07 2011] Spatial fit model total counts = 36.571400, observed total counts = 37.000000
[Fri Sep 30 15:28:07 2011] Offset between fit and detection position for source 40 = 0.081974 pixels
[Fri Sep 30 15:28:07 2011] 36.251000 total counts/ 15.187300 bgd. counts: snr = 5.404984
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.081974 pixels
  Position = (473.2, 1234.9) = 20 33 6.71 41 12 0.4
  Extent = 0.3 (0.2-0.4)", rotation angle = 0
  Source counts = 21.1 +/- 6.0
  Background counts = 15.2
  Rate = 0.0008 +/- 0.0002
[Fri Sep 30 15:28:07 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:28:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:28:07 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:28:07 2011] Source does appear to be extended
[Fri Sep 30 15:28:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:32:34 2011] Not overwriting source region fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src40_src.reg
[Fri Sep 30 15:32:34 2011] Extracting stamp from image fullrun_ccd1_acisf10956_pi14-548_cl_sm2.00.img.gz, (459, 1221) - (488, 1249)
[Fri Sep 30 15:32:34 2011] Writing fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src40.gif
[Fri Sep 30 15:34:40 2011] ../../acisf10956/products/events/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src40_src.evt and ../../acisf10956/products/events/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src40_bgd.evt exist, delete to re-create
[Fri Sep 30 15:34:41 2011] Size of ../../acisf10956/products/events/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src40_src.evt.gz[events] = 23 counts
[Fri Sep 30 15:34:41 2011] Mean chipx,y = (134.70, 956.65)
[Fri Sep 30 15:34:41 2011] Mean tdetx,y = (4175.35, 4241.70)
[Fri Sep 30 15:34:41 2011] chipx,y range = (119.00-152.00, 944.00-978.00)
[Fri Sep 30 15:34:41 2011] Size of ../../acisf10956/products/events/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src40_bgd.evt.gz[events] = 14 counts
[Fri Sep 30 15:34:41 2011] ../../acisf10956/products/images/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src40_src.img and ../../acisf10956/products/images/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src40_bgd.img exist, delete to re-create
[Fri Sep 30 15:34:41 2011] ../../acisf10956/products/spectra/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src40_src.pi and ../../acisf10956/products/spectra/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src40_bgd.pi exist, delete to re-create
[Fri Sep 30 15:34:41 2011] Not generating rmf since there are only 21 counts
[Fri Sep 30 15:34:44 2011] ../../acisf10956/products/lightcurves/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src40_src.lc and ../../acisf10956/products/lightcurves/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src40_bgd.lc exist, delete to re-create
[Fri Sep 30 15:37:02 2011] 203.2
[Fri Sep 30 15:45:05 2011] Updating aperture counts using extracted products
[Fri Sep 30 15:45:05 2011] Error reading totcts from fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src40_src.pi.gz
[Fri Sep 30 15:45:06 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 15:45:06 2011] Using photon index=1.80, rate=0.000761, arf fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src40.arf
[Fri Sep 30 15:45:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 15:45:06 2011] Updating source flux to 1.1e-14
[Fri Sep 30 15:45:36 2011] Source 40 has fewer than 100.000000 counts, skipping spectral fitting