[Fri Sep 30 15:23:06 2011] Detection parameters:
  Position = (501.3, 1220.1) = 20 33 5.46 41 11 53.3
  Extent = 1.0" x 0.5", rotation angle = 36 degrees
  Source counts = 15.0 +/- 4.1
  Background counts = 2.0
  Rate = 0.0005 +/- 0.0001

[Fri Sep 30 15:23:14 2011] Off-axis axis estimate = 2.10'
[Fri Sep 30 15:25:24 2011] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:25:24 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Fri Sep 30 15:25:24 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.157
[Fri Sep 30 15:25:24 2011] Giving source the simple spatial ID 37 for pass 0, mean size = 0.44"
[Fri Sep 30 15:25:30 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass0_src37.ximg exists
[Fri Sep 30 15:25:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10956_pi14-548_cl_pass0_src37.csv
[Fri Sep 30 15:25:30 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass0_src37_1.ximg exists
[Fri Sep 30 15:25:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10956_pi14-548_cl_pass0_src37.csv
[Fri Sep 30 15:25:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10956_pi14-548_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10956_pi14-548_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:25:32 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass0_tfrozen_src37.ximg exists
[Fri Sep 30 15:25:32 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass0_tfrozen_src37_1.ximg exists
[Fri Sep 30 15:25:32 2011] Fit fullrun_ccd1_acisf10956_pi14-548_cl_pass0_tfrozen_src37 appears to have run properly
[Fri Sep 30 15:26:19 2011] Spatial fit model total counts = 18.878300, observed total counts = 19.000000
[Fri Sep 30 15:26:19 2011] Offset between fit and detection position for source 38 = 2.017338 pixels
[Fri Sep 30 15:26:19 2011] 18.865990 total counts/ 6.324090 bgd. counts: snr = 4.987286
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 2.017338 pixels
  Position = (502.9, 1221.4) = 20 33 5.41 41 11 53.7
  Extent = 0.4 (0.3-0.7)", rotation angle = 0
  Source counts = 12.5 +/- 4.3
  Background counts = 6.3
  Rate = 0.0005 +/- 0.0002
[Fri Sep 30 15:26:19 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:26:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:26:19 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:26:19 2011] Source does appear to be extended
[Fri Sep 30 15:26:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:27:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:27:25 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Fri Sep 30 15:27:25 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.753
[Fri Sep 30 15:27:25 2011] Giving source the simple spatial ID 37 for pass 1, mean size = 0.45"
[Fri Sep 30 15:27:27 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass1_src37.ximg exists
[Fri Sep 30 15:27:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10956_pi14-548_cl_pass1_src37.csv
[Fri Sep 30 15:27:27 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass1_src37_1.ximg exists
[Fri Sep 30 15:27:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10956_pi14-548_cl_pass1_src37.csv
[Fri Sep 30 15:27:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10956_pi14-548_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10956_pi14-548_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:27:28 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass1_tfrozen_src37.ximg exists
[Fri Sep 30 15:27:28 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass1_tfrozen_src37_1.ximg exists
[Fri Sep 30 15:27:28 2011] Fit fullrun_ccd1_acisf10956_pi14-548_cl_pass1_tfrozen_src37 appears to have run properly
[Fri Sep 30 15:28:07 2011] Spatial fit model total counts = 19.402600, observed total counts = 19.000000
[Fri Sep 30 15:28:07 2011] Offset between fit and detection position for source 38 = 0.018717 pixels
[Fri Sep 30 15:28:07 2011] 19.136160 total counts/ 6.121060 bgd. counts: snr = 5.260587
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.018717 pixels
  Position = (502.9, 1221.4) = 20 33 5.41 41 11 53.7
  Extent = 0.4 (0.3-0.7)", rotation angle = 0
  Source counts = 13.0 +/- 4.4
  Background counts = 6.1
  Rate = 0.0005 +/- 0.0002
[Fri Sep 30 15:28:07 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:28:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:28:07 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:28:07 2011] Source does appear to be extended
[Fri Sep 30 15:28:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:32:34 2011] Not overwriting source region fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src38_src.reg
[Fri Sep 30 15:32:34 2011] Extracting stamp from image fullrun_ccd1_acisf10956_pi14-548_cl_sm2.00.img.gz, (484, 1202) - (522, 1241)
[Fri Sep 30 15:32:34 2011] Writing fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src38.gif
[Fri Sep 30 15:35:24 2011] ../../acisf10956/products/events/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src38_src.evt and ../../acisf10956/products/events/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src38_bgd.evt exist, delete to re-create
[Fri Sep 30 15:35:24 2011] Size of ../../acisf10956/products/events/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src38_src.evt.gz[events] = 13 counts
[Fri Sep 30 15:35:24 2011] Mean chipx,y = (133.62, 930.15)
[Fri Sep 30 15:35:24 2011] Mean tdetx,y = (4201.85, 4240.62)
[Fri Sep 30 15:35:24 2011] chipx,y range = (116.00-150.00, 913.00-947.00)
[Fri Sep 30 15:35:24 2011] Size of ../../acisf10956/products/events/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src38_bgd.evt.gz[events] = 10 counts
[Fri Sep 30 15:35:24 2011] ../../acisf10956/products/images/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src38_src.img and ../../acisf10956/products/images/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src38_bgd.img exist, delete to re-create
[Fri Sep 30 15:35:24 2011] ../../acisf10956/products/spectra/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src38_src.pi and ../../acisf10956/products/spectra/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src38_bgd.pi exist, delete to re-create
[Fri Sep 30 15:35:24 2011] Not generating rmf since there are only 13 counts
[Fri Sep 30 15:35:26 2011] ../../acisf10956/products/lightcurves/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src38_src.lc and ../../acisf10956/products/lightcurves/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src38_bgd.lc exist, delete to re-create
[Fri Sep 30 15:37:03 2011] 203.335
[Fri Sep 30 15:45:05 2011] Updating aperture counts using extracted products
[Fri Sep 30 15:45:05 2011] Error reading totcts from fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src38_src.pi.gz
[Fri Sep 30 15:45:06 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 15:45:06 2011] Using photon index=1.80, rate=0.00047, arf fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src38.arf
[Fri Sep 30 15:45:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 15:45:06 2011] Updating source flux to 7e-15
[Fri Sep 30 15:45:36 2011] Source 38 has fewer than 100.000000 counts, skipping spectral fitting