[Fri Sep 30 15:23:05 2011] Detection parameters:
  Position = (442.6, 1129.9) = 20 33 8.01 41 11 9.0
  Extent = 0.7" x 0.5", rotation angle = 26 degrees
  Source counts = 12.2 +/- 3.7
  Background counts = 1.8
  Rate = 0.0004 +/- 0.0001

[Fri Sep 30 15:23:14 2011] Off-axis axis estimate = 2.90'
[Fri Sep 30 15:25:24 2011] Using EEF radius (= 0.56 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:25:24 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Fri Sep 30 15:25:24 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.116
[Fri Sep 30 15:25:24 2011] Giving source the simple spatial ID 43 for pass 0, mean size = 0.56"
[Fri Sep 30 15:25:30 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass0_src43.ximg exists
[Fri Sep 30 15:25:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10956_pi14-548_cl_pass0_src43.csv
[Fri Sep 30 15:25:30 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass0_src43_1.ximg exists
[Fri Sep 30 15:25:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10956_pi14-548_cl_pass0_src43.csv
[Fri Sep 30 15:25:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10956_pi14-548_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10956_pi14-548_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:25:32 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass0_tfrozen_src43.ximg exists
[Fri Sep 30 15:25:32 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass0_tfrozen_src43_1.ximg exists
[Fri Sep 30 15:25:32 2011] Fit fullrun_ccd1_acisf10956_pi14-548_cl_pass0_tfrozen_src43 appears to have run properly
[Fri Sep 30 15:26:19 2011] Spatial fit model total counts = 15.190300, observed total counts = 16.000000
[Fri Sep 30 15:26:19 2011] Offset between fit and detection position for source 29 = 0.380178 pixels
[Fri Sep 30 15:26:19 2011] 15.769220 total counts/ 3.693220 bgd. counts: snr = 6.283773
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.380178 pixels
  Position = (442.7, 1130.3) = 20 33 8.03 41 11 8.9
  Extent = 0.7 (0.5-1.1)", rotation angle = 0
  Source counts = 12.1 +/- 4.0
  Background counts = 3.7
  Rate = 0.0004 +/- 0.0001
[Fri Sep 30 15:26:19 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:26:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:26:19 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:26:19 2011] Source does appear to be extended
[Fri Sep 30 15:26:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:27:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:27:25 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Fri Sep 30 15:27:25 2011] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.054
[Fri Sep 30 15:27:25 2011] Giving source the simple spatial ID 43 for pass 1, mean size = 0.71"
[Fri Sep 30 15:27:27 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass1_src43.ximg exists
[Fri Sep 30 15:27:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10956_pi14-548_cl_pass1_src43.csv
[Fri Sep 30 15:27:27 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass1_src43_1.ximg exists
[Fri Sep 30 15:27:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10956_pi14-548_cl_pass1_src43.csv
[Fri Sep 30 15:27:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10956_pi14-548_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10956_pi14-548_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:27:28 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass1_tfrozen_src43.ximg exists
[Fri Sep 30 15:27:28 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass1_tfrozen_src43_1.ximg exists
[Fri Sep 30 15:27:28 2011] Fit fullrun_ccd1_acisf10956_pi14-548_cl_pass1_tfrozen_src43 appears to have run properly
[Fri Sep 30 15:28:07 2011] Spatial fit model total counts = 15.840800, observed total counts = 16.000000
[Fri Sep 30 15:28:07 2011] Offset between fit and detection position for source 29 = 0.019653 pixels
[Fri Sep 30 15:28:07 2011] 16.254700 total counts/ 4.142200 bgd. counts: snr = 5.951388
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.019653 pixels
  Position = (442.7, 1130.3) = 20 33 8.03 41 11 8.9
  Extent = 0.7 (0.5-1.1)", rotation angle = 0
  Source counts = 12.1 +/- 4.0
  Background counts = 4.1
  Rate = 0.0004 +/- 0.0001
[Fri Sep 30 15:28:07 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:28:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:28:07 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:28:07 2011] Source does appear to be extended
[Fri Sep 30 15:28:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:32:34 2011] Not overwriting source region fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src29_src.reg
[Fri Sep 30 15:32:34 2011] Extracting stamp from image fullrun_ccd1_acisf10956_pi14-548_cl_sm2.00.img.gz, (412, 1099) - (474, 1161)
[Fri Sep 30 15:32:34 2011] Writing fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src29.gif
[Fri Sep 30 15:35:42 2011] ../../acisf10956/products/events/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src29_src.evt and ../../acisf10956/products/events/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src29_bgd.evt exist, delete to re-create
[Fri Sep 30 15:35:42 2011] Size of ../../acisf10956/products/events/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src29_src.evt.gz[events] = 14 counts
[Fri Sep 30 15:35:42 2011] Mean chipx,y = (238.71, 942.71)
[Fri Sep 30 15:35:42 2011] Mean tdetx,y = (4189.29, 4345.71)
[Fri Sep 30 15:35:42 2011] chipx,y range = (226.00-259.00, 924.00-957.00)
[Fri Sep 30 15:35:42 2011] Size of ../../acisf10956/products/events/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src29_bgd.evt.gz[events] = 19 counts
[Fri Sep 30 15:35:42 2011] ../../acisf10956/products/images/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src29_src.img and ../../acisf10956/products/images/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src29_bgd.img exist, delete to re-create
[Fri Sep 30 15:35:42 2011] ../../acisf10956/products/spectra/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src29_src.pi and ../../acisf10956/products/spectra/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src29_bgd.pi exist, delete to re-create
[Fri Sep 30 15:35:42 2011] Not generating rmf since there are only 12 counts
[Fri Sep 30 15:35:45 2011] ../../acisf10956/products/lightcurves/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src29_src.lc and ../../acisf10956/products/lightcurves/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src29_bgd.lc exist, delete to re-create
[Fri Sep 30 15:37:03 2011] 182.765
[Fri Sep 30 15:45:06 2011] Updating aperture counts using extracted products
[Fri Sep 30 15:45:06 2011] Error reading totcts from fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src29_src.pi.gz
[Fri Sep 30 15:45:06 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 15:45:06 2011] Using photon index=1.80, rate=0.000438, arf fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src29.arf
[Fri Sep 30 15:45:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 15:45:06 2011] Updating source flux to 7.3e-15
[Fri Sep 30 15:45:36 2011] Source 29 has fewer than 100.000000 counts, skipping spectral fitting