[Fri Sep 30 15:23:05 2011] Detection parameters:
  Position = (598.0, 1105.6) = 20 33 1.24 41 10 57.0
  Extent = 0.8" x 0.5", rotation angle = 64 degrees
  Source counts = 11.3 +/- 3.6
  Background counts = 1.7
  Rate = 0.0004 +/- 0.0001

[Fri Sep 30 15:23:14 2011] Off-axis axis estimate = 3.09'
[Fri Sep 30 15:25:24 2011] Using EEF radius (= 0.60 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:25:24 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Fri Sep 30 15:25:24 2011] source mask rpix=1.2, npix_max = 11, mask sum = 8, frac = 0.678
[Fri Sep 30 15:25:24 2011] Giving source the simple spatial ID 47 for pass 0, mean size = 0.60"
[Fri Sep 30 15:25:30 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass0_src47.ximg exists
[Fri Sep 30 15:25:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10956_pi14-548_cl_pass0_src47.csv
[Fri Sep 30 15:25:30 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass0_src47_1.ximg exists
[Fri Sep 30 15:25:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10956_pi14-548_cl_pass0_src47.csv
[Fri Sep 30 15:25:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10956_pi14-548_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10956_pi14-548_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:25:32 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass0_tfrozen_src47.ximg exists
[Fri Sep 30 15:25:32 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass0_tfrozen_src47_1.ximg exists
[Fri Sep 30 15:25:32 2011] Fit fullrun_ccd1_acisf10956_pi14-548_cl_pass0_tfrozen_src47 appears to have run properly
[Fri Sep 30 15:26:19 2011] Spatial fit model total counts = 19.461300, observed total counts = 18.000000
[Fri Sep 30 15:26:19 2011] Offset between fit and detection position for source 22 = 0.442914 pixels
[Fri Sep 30 15:26:19 2011] 19.565310 total counts/ 2.964110 bgd. counts: snr = 9.642559
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.442914 pixels
  Position = (598.3, 1105.4) = 20 33 1.25 41 10 56.6
  Extent = 0.5 (0.4-0.9)", rotation angle = 0
  Source counts = 16.6 +/- 4.4
  Background counts = 3.0
  Rate = 0.0006 +/- 0.0002
[Fri Sep 30 15:26:19 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:26:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:26:19 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:26:19 2011] Source does appear to be extended
[Fri Sep 30 15:26:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:27:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:27:25 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Fri Sep 30 15:27:25 2011] source mask rpix=1.1, npix_max = 10, mask sum = 6, frac = 0.574
[Fri Sep 30 15:27:25 2011] Giving source the simple spatial ID 46 for pass 1, mean size = 0.55"
[Fri Sep 30 15:27:27 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass1_src46.ximg exists
[Fri Sep 30 15:27:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10956_pi14-548_cl_pass1_src46.csv
[Fri Sep 30 15:27:27 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass1_src46_1.ximg exists
[Fri Sep 30 15:27:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10956_pi14-548_cl_pass1_src46.csv
[Fri Sep 30 15:27:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10956_pi14-548_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10956_pi14-548_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:27:28 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass1_tfrozen_src46.ximg exists
[Fri Sep 30 15:27:28 2011] fullrun_ccd1_acisf10956_pi14-548_cl_pass1_tfrozen_src46_1.ximg exists
[Fri Sep 30 15:27:28 2011] Fit fullrun_ccd1_acisf10956_pi14-548_cl_pass1_tfrozen_src46 appears to have run properly
[Fri Sep 30 15:28:07 2011] Spatial fit model total counts = 17.087100, observed total counts = 18.000000
[Fri Sep 30 15:28:07 2011] Offset between fit and detection position for source 22 = 0.049107 pixels
[Fri Sep 30 15:28:07 2011] 17.337820 total counts/ 1.299020 bgd. counts: snr = 14.072263
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.049107 pixels
  Position = (598.3, 1105.3) = 20 33 1.25 41 10 56.6
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 16.0 +/- 4.2
  Background counts = 1.3
  Rate = 0.0006 +/- 0.0002
[Fri Sep 30 15:28:07 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:28:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:28:07 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:28:07 2011] Source does appear to be extended
[Fri Sep 30 15:28:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:32:35 2011] Not overwriting source region fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src22_src.reg
[Fri Sep 30 15:32:35 2011] Extracting stamp from image fullrun_ccd1_acisf10956_pi14-548_cl_sm2.00.img.gz, (572, 1079) - (625, 1132)
[Fri Sep 30 15:32:35 2011] Writing fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src22.gif
[Fri Sep 30 15:35:54 2011] ../../acisf10956/products/events/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src22_src.evt and ../../acisf10956/products/events/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src22_bgd.evt exist, delete to re-create
[Fri Sep 30 15:35:54 2011] Size of ../../acisf10956/products/events/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src22_src.evt.gz[events] = 13 counts
[Fri Sep 30 15:35:54 2011] Mean chipx,y = (199.77, 784.23)
[Fri Sep 30 15:35:54 2011] Mean tdetx,y = (4347.77, 4306.77)
[Fri Sep 30 15:35:54 2011] chipx,y range = (174.00-210.00, 776.00-804.00)
[Fri Sep 30 15:35:54 2011] Size of ../../acisf10956/products/events/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src22_bgd.evt.gz[events] = 28 counts
[Fri Sep 30 15:35:54 2011] ../../acisf10956/products/images/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src22_src.img and ../../acisf10956/products/images/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src22_bgd.img exist, delete to re-create
[Fri Sep 30 15:35:54 2011] ../../acisf10956/products/spectra/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src22_src.pi and ../../acisf10956/products/spectra/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src22_bgd.pi exist, delete to re-create
[Fri Sep 30 15:35:54 2011] Not generating rmf since there are only 16 counts
[Fri Sep 30 15:35:57 2011] ../../acisf10956/products/lightcurves/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src22_src.lc and ../../acisf10956/products/lightcurves/fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src22_bgd.lc exist, delete to re-create
[Fri Sep 30 15:37:03 2011] 196.659
[Fri Sep 30 15:45:06 2011] Updating aperture counts using extracted products
[Fri Sep 30 15:45:06 2011] Error reading totcts from fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src22_src.pi.gz
[Fri Sep 30 15:45:06 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 15:45:06 2011] Using photon index=1.80, rate=0.000579, arf fullrun_ccd1_acisf10956_pi14-548_pass1_cl_src22.arf
[Fri Sep 30 15:45:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 15:45:06 2011] Updating source flux to 9e-15
[Fri Sep 30 15:45:36 2011] Source 22 has fewer than 100.000000 counts, skipping spectral fitting