[Fri Sep 30 15:22:50 2011] Detection parameters:
  Position = (847.6, 468.5) = 20 33 30.41 41 9 36.6
  Extent = 1.8" x 1.6", rotation angle = 159 degrees
  Source counts = 21.8 +/- 5.5
  Background counts = 8.2
  Rate = 0.0008 +/- 0.0002

[Fri Sep 30 15:22:58 2011] Off-axis axis estimate = 6.53'
[Fri Sep 30 15:25:14 2011] Using EEF radius (= 1.91 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:25:14 2011] Initial guess for spatial extent in simple fitting = 1.91"
[Fri Sep 30 15:25:14 2011] source mask rpix=3.9, npix_max = 76, mask sum = 81, frac = 1.055
[Fri Sep 30 15:25:14 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 1.91"
[Fri Sep 30 15:25:19 2011] fullrun_ccd0_acisf10956_pi14-548_cl_pass0_src26.ximg exists
[Fri Sep 30 15:25:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10956_pi14-548_cl_pass0_src26.csv
[Fri Sep 30 15:25:20 2011] fullrun_ccd0_acisf10956_pi14-548_cl_pass0_src26_1.ximg exists
[Fri Sep 30 15:25:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10956_pi14-548_cl_pass0_src26.csv
[Fri Sep 30 15:25:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10956_pi14-548_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10956_pi14-548_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:25:22 2011] fullrun_ccd0_acisf10956_pi14-548_cl_pass0_tfrozen_src26.ximg exists
[Fri Sep 30 15:25:22 2011] fullrun_ccd0_acisf10956_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists
[Fri Sep 30 15:25:22 2011] Fit fullrun_ccd0_acisf10956_pi14-548_cl_pass0_tfrozen_src26 appears to have run properly
[Fri Sep 30 15:26:08 2011] Spatial fit model total counts = 41.999800, observed total counts = 42.000000
[Fri Sep 30 15:26:08 2011] Offset between fit and detection position for source 41 = 0.981992 pixels
[Fri Sep 30 15:26:08 2011] 41.577100 total counts/ 30.556700 bgd. counts: snr = 1.993628
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 0.981992 pixels
  Position = (848.2, 469.3) = 20 33 30.40 41 9 36.7
  Extent = 0.6 (0.5-1.1)", rotation angle = 0
  Source counts = 11.0 +/- 6.4
  Background counts = 30.6
  Rate = 0.0004 +/- 0.0002
[Fri Sep 30 15:26:08 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:26:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:26:08 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:26:08 2011] Source does appear to be extended
[Fri Sep 30 15:26:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:27:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:27:20 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Fri Sep 30 15:27:20 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.963
[Fri Sep 30 15:27:20 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 0.62"
[Fri Sep 30 15:27:22 2011] fullrun_ccd0_acisf10956_pi14-548_cl_pass1_src26.ximg exists
[Fri Sep 30 15:27:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10956_pi14-548_cl_pass1_src26.csv
[Fri Sep 30 15:27:22 2011] fullrun_ccd0_acisf10956_pi14-548_cl_pass1_src26_1.ximg exists
[Fri Sep 30 15:27:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10956_pi14-548_cl_pass1_src26.csv
[Fri Sep 30 15:27:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10956_pi14-548_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10956_pi14-548_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:27:23 2011] fullrun_ccd0_acisf10956_pi14-548_cl_pass1_tfrozen_src26.ximg exists
[Fri Sep 30 15:27:23 2011] fullrun_ccd0_acisf10956_pi14-548_cl_pass1_tfrozen_src26_1.ximg exists
[Fri Sep 30 15:27:23 2011] Fit fullrun_ccd0_acisf10956_pi14-548_cl_pass1_tfrozen_src26 appears to have run properly
[Fri Sep 30 15:27:54 2011] Spatial fit model total counts = 25.993700, observed total counts = 26.000000
[Fri Sep 30 15:27:54 2011] Offset between fit and detection position for source 41 = 0.047508 pixels
[Fri Sep 30 15:27:54 2011] 25.812520 total counts/ 16.207500 bgd. counts: snr = 2.385834
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 0.047508 pixels
  Position = (848.2, 469.2) = 20 33 30.40 41 9 36.7
  Extent = 0.6 (0.4-1.0)", rotation angle = 0
  Source counts = 9.6 +/- 5.1
  Background counts = 16.2
  Rate = 0.0003 +/- 0.0002
[Fri Sep 30 15:27:54 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:27:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:27:54 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:27:54 2011] Source does appear to be extended
[Fri Sep 30 15:27:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:28:59 2011] Not overwriting source region fullrun_ccd0_acisf10956_pi14-548_pass1_cl_src41_src.reg
[Fri Sep 30 15:28:59 2011] Extracting stamp from image fullrun_ccd0_acisf10956_pi14-548_cl_sm2.00.img.gz, (822, 443) - (875, 496)
[Fri Sep 30 15:28:59 2011] Writing fullrun_ccd0_acisf10956_pi14-548_pass1_cl_src41.gif
[Fri Sep 30 15:30:43 2011] ../../acisf10956/products/events/fullrun_ccd0_acisf10956_pi14-548_pass1_cl_src41_src.evt and ../../acisf10956/products/events/fullrun_ccd0_acisf10956_pi14-548_pass1_cl_src41_bgd.evt exist, delete to re-create
[Fri Sep 30 15:30:44 2011] Size of ../../acisf10956/products/events/fullrun_ccd0_acisf10956_pi14-548_pass1_cl_src41_src.evt.gz[events] = 14 counts
[Fri Sep 30 15:30:44 2011] Mean chipx,y = (378.14, 763.00)
[Fri Sep 30 15:30:44 2011] Mean tdetx,y = (3824.00, 4753.86)
[Fri Sep 30 15:30:44 2011] chipx,y range = (364.00-396.00, 745.00-776.00)
[Fri Sep 30 15:30:44 2011] Size of ../../acisf10956/products/events/fullrun_ccd0_acisf10956_pi14-548_pass1_cl_src41_bgd.evt.gz[events] = 23 counts
[Fri Sep 30 15:30:44 2011] ../../acisf10956/products/images/fullrun_ccd0_acisf10956_pi14-548_pass1_cl_src41_src.img and ../../acisf10956/products/images/fullrun_ccd0_acisf10956_pi14-548_pass1_cl_src41_bgd.img exist, delete to re-create
[Fri Sep 30 15:30:44 2011] ../../acisf10956/products/spectra/fullrun_ccd0_acisf10956_pi14-548_pass1_cl_src41_src.pi and ../../acisf10956/products/spectra/fullrun_ccd0_acisf10956_pi14-548_pass1_cl_src41_bgd.pi exist, delete to re-create
[Fri Sep 30 15:30:44 2011] Not generating rmf since there are only 9 counts
[Fri Sep 30 15:30:46 2011] ../../acisf10956/products/lightcurves/fullrun_ccd0_acisf10956_pi14-548_pass1_cl_src41_src.lc and ../../acisf10956/products/lightcurves/fullrun_ccd0_acisf10956_pi14-548_pass1_cl_src41_bgd.lc exist, delete to re-create
[Fri Sep 30 15:32:32 2011] 180.315
[Fri Sep 30 15:45:04 2011] Updating aperture counts using extracted products
[Fri Sep 30 15:45:04 2011] Error reading totcts from fullrun_ccd0_acisf10956_pi14-548_pass1_cl_src41_src.pi.gz
[Fri Sep 30 15:45:05 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 15:45:05 2011] Using photon index=1.80, rate=0.000347, arf fullrun_ccd0_acisf10956_pi14-548_pass1_cl_src41.arf
[Fri Sep 30 15:45:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 15:45:05 2011] Updating source flux to 5.7e-15
[Fri Sep 30 15:45:16 2011] Source 41 has fewer than 100.000000 counts, skipping spectral fitting