[Fri Sep 30 15:22:49 2011] Detection parameters:
  Position = (1042.4, 915.5) = 20 33 21.94 41 13 16.6
  Extent = 0.6" x 0.5", rotation angle = 29 degrees
  Source counts = 13.8 +/- 3.9
  Background counts = 1.2
  Rate = 0.0005 +/- 0.0001

[Fri Sep 30 15:22:58 2011] Off-axis axis estimate = 3.34'
[Fri Sep 30 15:25:14 2011] Using EEF radius (= 0.65 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:25:14 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Fri Sep 30 15:25:14 2011] source mask rpix=1.3, npix_max = 13, mask sum = 9, frac = 0.674
[Fri Sep 30 15:25:14 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 0.65"
[Fri Sep 30 15:25:17 2011] fullrun_ccd0_acisf10956_pi14-548_cl_pass0_src19.ximg exists
[Fri Sep 30 15:25:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10956_pi14-548_cl_pass0_src19.csv
[Fri Sep 30 15:25:17 2011] fullrun_ccd0_acisf10956_pi14-548_cl_pass0_src19_1.ximg exists
[Fri Sep 30 15:25:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10956_pi14-548_cl_pass0_src19.csv
[Fri Sep 30 15:25:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10956_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10956_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:25:22 2011] fullrun_ccd0_acisf10956_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Fri Sep 30 15:25:22 2011] fullrun_ccd0_acisf10956_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Fri Sep 30 15:25:22 2011] Fit fullrun_ccd0_acisf10956_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Fri Sep 30 15:26:08 2011] Spatial fit model total counts = 21.567100, observed total counts = 22.000000
[Fri Sep 30 15:26:08 2011] Offset between fit and detection position for source 26 = 1.118401 pixels
[Fri Sep 30 15:26:08 2011] 21.173180 total counts/ 8.887480 bgd. counts: snr = 4.121076
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 1.118401 pixels
  Position = (1043.2, 916.2) = 20 33 21.92 41 13 16.7
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 12.3 +/- 4.6
  Background counts = 8.9
  Rate = 0.0004 +/- 0.0002
[Fri Sep 30 15:26:08 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:26:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:26:08 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:26:08 2011] Source does appear to be extended
[Fri Sep 30 15:26:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:27:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:27:20 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Fri Sep 30 15:27:20 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.968
[Fri Sep 30 15:27:20 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 0.50"
[Fri Sep 30 15:27:22 2011] fullrun_ccd0_acisf10956_pi14-548_cl_pass1_src19.ximg exists
[Fri Sep 30 15:27:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10956_pi14-548_cl_pass1_src19.csv
[Fri Sep 30 15:27:22 2011] fullrun_ccd0_acisf10956_pi14-548_cl_pass1_src19_1.ximg exists
[Fri Sep 30 15:27:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10956_pi14-548_cl_pass1_src19.csv
[Fri Sep 30 15:27:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10956_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10956_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:27:23 2011] fullrun_ccd0_acisf10956_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Fri Sep 30 15:27:23 2011] fullrun_ccd0_acisf10956_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Fri Sep 30 15:27:23 2011] Fit fullrun_ccd0_acisf10956_pi14-548_cl_pass1_tfrozen_src19 appears to have run properly
[Fri Sep 30 15:27:54 2011] Spatial fit model total counts = 18.971500, observed total counts = 20.000000
[Fri Sep 30 15:27:54 2011] Offset between fit and detection position for source 26 = 0.017106 pixels
[Fri Sep 30 15:27:54 2011] 18.820540 total counts/ 5.817540 bgd. counts: snr = 5.391056
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.017106 pixels
  Position = (1043.3, 916.2) = 20 33 21.92 41 13 16.7
  Extent = 0.5 (0.3-0.8)", rotation angle = 0
  Source counts = 13.0 +/- 4.3
  Background counts = 5.8
  Rate = 0.0005 +/- 0.0002
[Fri Sep 30 15:27:54 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:27:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:27:54 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:27:54 2011] Source does appear to be extended
[Fri Sep 30 15:27:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:28:59 2011] Not overwriting source region fullrun_ccd0_acisf10956_pi14-548_pass1_cl_src26_src.reg
[Fri Sep 30 15:28:59 2011] Extracting stamp from image fullrun_ccd0_acisf10956_pi14-548_cl_sm2.00.img.gz, (1020, 893) - (1066, 939)
[Fri Sep 30 15:28:59 2011] Writing fullrun_ccd0_acisf10956_pi14-548_pass1_cl_src26.gif
[Fri Sep 30 15:30:15 2011] ../../acisf10956/products/events/fullrun_ccd0_acisf10956_pi14-548_pass1_cl_src26_src.evt and ../../acisf10956/products/events/fullrun_ccd0_acisf10956_pi14-548_pass1_cl_src26_bgd.evt exist, delete to re-create
[Fri Sep 30 15:30:15 2011] Size of ../../acisf10956/products/events/fullrun_ccd0_acisf10956_pi14-548_pass1_cl_src26_src.evt.gz[events] = 14 counts
[Fri Sep 30 15:30:15 2011] Mean chipx,y = (869.00, 723.14)
[Fri Sep 30 15:30:15 2011] Mean tdetx,y = (3784.14, 4263.00)
[Fri Sep 30 15:30:15 2011] chipx,y range = (851.00-883.00, 711.00-740.00)
[Fri Sep 30 15:30:15 2011] Size of ../../acisf10956/products/events/fullrun_ccd0_acisf10956_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 10 counts
[Fri Sep 30 15:30:15 2011] ../../acisf10956/products/images/fullrun_ccd0_acisf10956_pi14-548_pass1_cl_src26_src.img and ../../acisf10956/products/images/fullrun_ccd0_acisf10956_pi14-548_pass1_cl_src26_bgd.img exist, delete to re-create
[Fri Sep 30 15:30:15 2011] ../../acisf10956/products/spectra/fullrun_ccd0_acisf10956_pi14-548_pass1_cl_src26_src.pi and ../../acisf10956/products/spectra/fullrun_ccd0_acisf10956_pi14-548_pass1_cl_src26_bgd.pi exist, delete to re-create
[Fri Sep 30 15:30:15 2011] Not generating rmf since there are only 13 counts
[Fri Sep 30 15:30:18 2011] ../../acisf10956/products/lightcurves/fullrun_ccd0_acisf10956_pi14-548_pass1_cl_src26_src.lc and ../../acisf10956/products/lightcurves/fullrun_ccd0_acisf10956_pi14-548_pass1_cl_src26_bgd.lc exist, delete to re-create
[Fri Sep 30 15:32:32 2011] 194.745
[Fri Sep 30 15:45:04 2011] Updating aperture counts using extracted products
[Fri Sep 30 15:45:04 2011] Error reading totcts from fullrun_ccd0_acisf10956_pi14-548_pass1_cl_src26_src.pi.gz
[Fri Sep 30 15:45:04 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 15:45:04 2011] Using photon index=1.80, rate=0.00047, arf fullrun_ccd0_acisf10956_pi14-548_pass1_cl_src26.arf
[Fri Sep 30 15:45:04 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 15:45:04 2011] Updating source flux to 7.3e-15
[Fri Sep 30 15:45:16 2011] Source 26 has fewer than 100.000000 counts, skipping spectral fitting