[Tue Oct 18 20:50:46 2011] Detection parameters:
  Position = (480.4, 919.2) = 20 33 23.43 41 20 40.6
  Extent = 0.8" x 0.7", rotation angle = 135 degrees
  Source counts = 11.0 +/- 3.6
  Background counts = 2.0
  Rate = 0.0004 +/- 0.0001

[Tue Oct 18 20:50:49 2011] Off-axis axis estimate = 4.70'
[Tue Oct 18 20:52:29 2011] Using EEF radius (= 1.06 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 20:52:29 2011] Initial guess for spatial extent in simple fitting = 1.06"
[Tue Oct 18 20:52:29 2011] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.882
[Tue Oct 18 20:52:29 2011] Giving source the simple spatial ID 76 for pass 0, mean size = 1.06"
[Tue Oct 18 20:52:32 2011] fullrun_ccd3_acisf10955_pi14-548_cl_pass0_src76.ximg exists
[Tue Oct 18 20:52:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10955_pi14-548_cl_pass0_src76.csv
[Tue Oct 18 20:52:32 2011] fullrun_ccd3_acisf10955_pi14-548_cl_pass0_src76_1.ximg exists
[Tue Oct 18 20:52:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10955_pi14-548_cl_pass0_src76.csv
[Tue Oct 18 20:52:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10955_pi14-548_cl_pass0_src76_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10955_pi14-548_cl_pass0_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 20:52:34 2011] fullrun_ccd3_acisf10955_pi14-548_cl_pass0_tfrozen_src76.ximg exists
[Tue Oct 18 20:52:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10955_pi14-548_cl_pass0_tfrozen_src76.csv
[Tue Oct 18 20:52:35 2011] fullrun_ccd3_acisf10955_pi14-548_cl_pass0_tfrozen_src76_1.ximg exists
[Tue Oct 18 20:52:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10955_pi14-548_cl_pass0_tfrozen_src76.csv
[Tue Oct 18 20:52:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10955_pi14-548_cl_pass0_tfrozen_src76_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10955_pi14-548_cl_pass0_tfrozen_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 20:53:15 2011] Spatial fit model total counts = 11.803300, observed total counts = 14.000000
[Tue Oct 18 20:53:15 2011] Offset between fit and detection position for source 78 = 0.492210 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 78 = 0.492210 pixels
  Position = (480.9, 919.4) = 20 33 23.44 41 20 40.5
  Extent = 0.9 (0.6-1.3)", rotation angle = 0
  Source counts = 12.8 +/- 3.6
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Tue Oct 18 20:53:15 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 20:53:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 20:53:15 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 20:53:15 2011] Source does appear to be extended
[Tue Oct 18 20:53:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 20:54:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 20:54:10 2011] Initial guess for spatial extent in simple fitting = 0.95"
[Tue Oct 18 20:54:10 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.064
[Tue Oct 18 20:54:10 2011] Giving source the simple spatial ID 74 for pass 1, mean size = 0.95"
[Tue Oct 18 20:54:18 2011] fullrun_ccd3_acisf10955_pi14-548_cl_pass1_src74.ximg exists
[Tue Oct 18 20:54:18 2011] fullrun_ccd3_acisf10955_pi14-548_cl_pass1_src74_1.ximg exists
[Tue Oct 18 20:54:18 2011] Fit fullrun_ccd3_acisf10955_pi14-548_cl_pass1_src74 appears to have run properly
[Tue Oct 18 20:54:19 2011] fullrun_ccd3_acisf10955_pi14-548_cl_pass1_tfrozen_src74.ximg exists
[Tue Oct 18 20:54:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10955_pi14-548_cl_pass1_tfrozen_src74.csv
[Tue Oct 18 20:54:19 2011] fullrun_ccd3_acisf10955_pi14-548_cl_pass1_tfrozen_src74_1.ximg exists
[Tue Oct 18 20:54:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10955_pi14-548_cl_pass1_tfrozen_src74.csv
[Tue Oct 18 20:54:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10955_pi14-548_cl_pass1_tfrozen_src74_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10955_pi14-548_cl_pass1_tfrozen_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 20:54:56 2011] Spatial fit model total counts = 11.474700, observed total counts = 15.000000
[Tue Oct 18 20:54:56 2011] Offset between fit and detection position for source 78 = 0.079192 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 78 = 0.079192 pixels
  Position = (480.9, 919.3) = 20 33 23.44 41 20 40.4
  Extent = 1.0 (0.6-1.2)", rotation angle = 0
  Source counts = 12.9 +/- 3.6
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Tue Oct 18 20:54:56 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 20:54:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 20:54:56 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 20:54:56 2011] Source does appear to be extended
[Tue Oct 18 20:54:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 22:13:28 2011] Not overwriting source region fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src78_src.reg
[Tue Oct 18 22:13:28 2011] Extracting stamp from image fullrun_ccd3_acisf10955_pi14-548_cl_sm2.00.img.gz, (437, 876) - (524, 963)
[Tue Oct 18 22:13:28 2011] Writing fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src78.gif
[Tue Oct 18 22:53:12 2011] ../../acisf10955/products/events/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src78_src.evt and ../../acisf10955/products/events/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src78_bgd.evt exist, delete to re-create
[Tue Oct 18 22:53:12 2011] Size of ../../acisf10955/products/events/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src78_src.evt.gz[events] = 13 counts
[Tue Oct 18 22:53:12 2011] Mean chipx,y = (418.15, 815.62)
[Tue Oct 18 22:53:12 2011] Mean tdetx,y = (4316.38, 3479.15)
[Tue Oct 18 22:53:12 2011] chipx,y range = (401.00-432.00, 797.00-830.00)
[Tue Oct 18 22:53:12 2011] Size of ../../acisf10955/products/events/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src78_bgd.evt.gz[events] = 45 counts
[Tue Oct 18 22:53:12 2011] ../../acisf10955/products/images/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src78_src.img and ../../acisf10955/products/images/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src78_bgd.img exist, delete to re-create
[Tue Oct 18 22:53:12 2011] Not generating rmf since there are only 12 counts
[Tue Oct 18 22:53:12 2011] arf not found, will run specextract
[Tue Oct 18 22:53:39 2011] ../../acisf10955/products/spectra/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src78.warf not found
[Tue Oct 18 22:53:39 2011] ../../acisf10955/products/spectra/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src78.wrmf not found
[Tue Oct 18 22:53:39 2011] Removal of ../../acisf10955/products/spectra/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src78.soff failed
[Tue Oct 18 22:53:44 2011] ../../acisf10955/products/lightcurves/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src78_src.lc and ../../acisf10955/products/lightcurves/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src78_bgd.lc exist, delete to re-create
[Tue Oct 18 23:11:06 2011] Spectrum 78 has only 13 counts, deleting rmf
[Tue Oct 18 23:11:06 2011] 182.676
[Tue Oct 18 23:13:46 2011] Updating aperture counts using extracted products
[Tue Oct 18 23:13:46 2011] Error reading totcts from fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src78_src.pi.gz
[Tue Oct 18 23:13:48 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 23:13:48 2011] Using photon index=1.80, rate=0.00047, arf fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src78.arf
[Tue Oct 18 23:13:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 23:13:48 2011] Updating source flux to 7.7e-15
[Tue Oct 18 23:14:16 2011] Source 78 has fewer than 100.000000 counts, skipping spectral fitting