[Tue Oct 18 20:50:43 2011] Detection parameters:
  Position = (785.2, 319.1) = 20 33 10.16 41 15 45.2
  Extent = 1.2" x 0.7", rotation angle = 104 degrees
  Source counts = 22.4 +/- 5.3
  Background counts = 5.6
  Rate = 0.0008 +/- 0.0002

[Tue Oct 18 20:50:49 2011] Off-axis axis estimate = 6.36'
[Tue Oct 18 20:52:29 2011] Using EEF radius (= 1.82 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 20:52:29 2011] Initial guess for spatial extent in simple fitting = 1.82"
[Tue Oct 18 20:52:29 2011] source mask rpix=3.7, npix_max = 70, mask sum = 64, frac = 0.910
[Tue Oct 18 20:52:29 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 1.82"
[Tue Oct 18 20:52:31 2011] fullrun_ccd3_acisf10955_pi14-548_cl_pass0_src30.ximg exists
[Tue Oct 18 20:52:31 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10955_pi14-548_cl_pass0_src30.csv
[Tue Oct 18 20:52:31 2011] fullrun_ccd3_acisf10955_pi14-548_cl_pass0_src30_1.ximg exists
[Tue Oct 18 20:52:31 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10955_pi14-548_cl_pass0_src30.csv
[Tue Oct 18 20:52:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10955_pi14-548_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10955_pi14-548_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 20:52:33 2011] fullrun_ccd3_acisf10955_pi14-548_cl_pass0_tfrozen_src30.ximg exists
[Tue Oct 18 20:52:33 2011] fullrun_ccd3_acisf10955_pi14-548_cl_pass0_tfrozen_src30_1.ximg exists
[Tue Oct 18 20:52:33 2011] Fit fullrun_ccd3_acisf10955_pi14-548_cl_pass0_tfrozen_src30 appears to have run properly
[Tue Oct 18 20:53:15 2011] Spatial fit model total counts = 37.801700, observed total counts = 37.000000
[Tue Oct 18 20:53:15 2011] Offset between fit and detection position for source 61 = 0.555433 pixels
[Tue Oct 18 20:53:15 2011] 37.854800 total counts/ 15.748900 bgd. counts: snr = 5.570358
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 0.555433 pixels
  Position = (785.7, 318.7) = 20 33 10.16 41 15 44.8
  Extent = 1.0 (0.8-1.4)", rotation angle = 0
  Source counts = 22.1 +/- 6.2
  Background counts = 15.7
  Rate = 0.0008 +/- 0.0002
[Tue Oct 18 20:53:15 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 20:53:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 20:53:15 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 20:53:15 2011] Source does appear to be extended
[Tue Oct 18 20:53:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 20:54:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 20:54:10 2011] Initial guess for spatial extent in simple fitting = 1.04"
[Tue Oct 18 20:54:10 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.909
[Tue Oct 18 20:54:10 2011] Giving source the simple spatial ID 30 for pass 1, mean size = 1.04"
[Tue Oct 18 20:54:17 2011] fullrun_ccd3_acisf10955_pi14-548_cl_pass1_src30.ximg exists
[Tue Oct 18 20:54:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10955_pi14-548_cl_pass1_src30.csv
[Tue Oct 18 20:54:17 2011] fullrun_ccd3_acisf10955_pi14-548_cl_pass1_src30_1.ximg exists
[Tue Oct 18 20:54:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10955_pi14-548_cl_pass1_src30.csv
[Tue Oct 18 20:54:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10955_pi14-548_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10955_pi14-548_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 20:54:19 2011] fullrun_ccd3_acisf10955_pi14-548_cl_pass1_tfrozen_src30.ximg exists
[Tue Oct 18 20:54:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10955_pi14-548_cl_pass1_tfrozen_src30.csv
[Tue Oct 18 20:54:19 2011] fullrun_ccd3_acisf10955_pi14-548_cl_pass1_tfrozen_src30_1.ximg exists
[Tue Oct 18 20:54:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10955_pi14-548_cl_pass1_tfrozen_src30.csv
[Tue Oct 18 20:54:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10955_pi14-548_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10955_pi14-548_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 20:54:56 2011] Spatial fit model total counts = 25.833200, observed total counts = 28.000000
[Tue Oct 18 20:54:56 2011] Offset between fit and detection position for source 61 = 0.177759 pixels
[Tue Oct 18 20:54:56 2011] 27.396876 total counts/ 0.237976 bgd. counts: snr = 55.673125
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 0.177759 pixels
  Position = (785.7, 318.5) = 20 33 10.16 41 15 44.7
  Extent = 1.2 (0.9-1.5)", rotation angle = 0
  Source counts = 27.2 +/- 5.2
  Background counts = 0.2
  Rate = 0.001 +/- 0.0002
[Tue Oct 18 20:54:56 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 20:54:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 20:54:56 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 20:54:56 2011] Source does appear to be extended
[Tue Oct 18 20:54:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 22:13:27 2011] Not overwriting source region fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src61_src.reg
[Tue Oct 18 22:13:27 2011] Extracting stamp from image fullrun_ccd3_acisf10955_pi14-548_cl_sm2.00.img.gz, (732, 265) - (839, 372)
[Tue Oct 18 22:13:27 2011] Writing fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src61.gif
[Tue Oct 18 22:28:32 2011] ../../acisf10955/products/events/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src61_src.evt and ../../acisf10955/products/events/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src61_bgd.evt exist, delete to re-create
[Tue Oct 18 22:28:32 2011] Size of ../../acisf10955/products/events/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src61_src.evt.gz[events] = 28 counts
[Tue Oct 18 22:28:32 2011] Mean chipx,y = (809.68, 261.32)
[Tue Oct 18 22:28:32 2011] Mean tdetx,y = (4870.68, 3870.68)
[Tue Oct 18 22:28:32 2011] chipx,y range = (789.00-825.00, 241.00-281.00)
[Tue Oct 18 22:28:33 2011] Size of ../../acisf10955/products/events/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src61_bgd.evt.gz[events] = 76 counts
[Tue Oct 18 22:28:33 2011] ../../acisf10955/products/images/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src61_src.img and ../../acisf10955/products/images/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src61_bgd.img exist, delete to re-create
[Tue Oct 18 22:28:33 2011] Not generating rmf since there are only 27 counts
[Tue Oct 18 22:28:33 2011] arf not found, will run specextract
[Tue Oct 18 22:28:55 2011] ../../acisf10955/products/spectra/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src61.warf not found
[Tue Oct 18 22:28:55 2011] ../../acisf10955/products/spectra/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src61.wrmf not found
[Tue Oct 18 22:28:55 2011] Removal of ../../acisf10955/products/spectra/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src61.soff failed
[Tue Oct 18 22:29:01 2011] ../../acisf10955/products/lightcurves/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src61_src.lc and ../../acisf10955/products/lightcurves/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src61_bgd.lc exist, delete to re-create
[Tue Oct 18 23:11:06 2011] Spectrum 61 has only 27 counts, deleting rmf
[Tue Oct 18 23:11:06 2011] 181.907
[Tue Oct 18 23:13:45 2011] Updating aperture counts using extracted products
[Tue Oct 18 23:13:45 2011] Error reading totcts from fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src61_src.pi.gz
[Tue Oct 18 23:13:47 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 23:13:47 2011] Using photon index=1.80, rate=0.000988, arf fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src61.arf
[Tue Oct 18 23:13:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 23:13:47 2011] Updating source flux to 1.6e-14
[Tue Oct 18 23:14:16 2011] Source 61 has fewer than 100.000000 counts, skipping spectral fitting