[Tue Oct 18 20:50:42 2011] Detection parameters:
  Position = (520.4, 249.8) = 20 33 21.72 41 15 11.3
  Extent = 1.0" x 0.5", rotation angle = 100 degrees
  Source counts = 14.5 +/- 4.0
  Background counts = 1.5
  Rate = 0.0005 +/- 0.0001

[Tue Oct 18 20:50:49 2011] Off-axis axis estimate = 4.61'
[Tue Oct 18 20:52:29 2011] Using EEF radius (= 1.03 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 20:52:29 2011] Initial guess for spatial extent in simple fitting = 1.03"
[Tue Oct 18 20:52:29 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.928
[Tue Oct 18 20:52:29 2011] Giving source the simple spatial ID 56 for pass 0, mean size = 1.03"
[Tue Oct 18 20:52:32 2011] fullrun_ccd3_acisf10955_pi14-548_cl_pass0_src56.ximg exists
[Tue Oct 18 20:52:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10955_pi14-548_cl_pass0_src56.csv
[Tue Oct 18 20:52:32 2011] fullrun_ccd3_acisf10955_pi14-548_cl_pass0_src56_1.ximg exists
[Tue Oct 18 20:52:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10955_pi14-548_cl_pass0_src56.csv
[Tue Oct 18 20:52:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10955_pi14-548_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10955_pi14-548_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 20:52:34 2011] fullrun_ccd3_acisf10955_pi14-548_cl_pass0_tfrozen_src56.ximg exists
[Tue Oct 18 20:52:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10955_pi14-548_cl_pass0_tfrozen_src56.csv
[Tue Oct 18 20:52:34 2011] fullrun_ccd3_acisf10955_pi14-548_cl_pass0_tfrozen_src56_1.ximg exists
[Tue Oct 18 20:52:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10955_pi14-548_cl_pass0_tfrozen_src56.csv
[Tue Oct 18 20:52:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10955_pi14-548_cl_pass0_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10955_pi14-548_cl_pass0_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 20:53:15 2011] Spatial fit model total counts = 16.905400, observed total counts = 19.000000
[Tue Oct 18 20:53:15 2011] Offset between fit and detection position for source 56 = 0.670187 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 0.670187 pixels
  Position = (521.0, 250.2) = 20 33 21.71 41 15 11.2
  Extent = 1.4 (1.0-2.1)" x 0.7 (0.4-1.2)", rotation angle = 78 (58-90) degrees
  Source counts = 16.4 +/- 4.0
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Tue Oct 18 20:53:15 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 20:53:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 20:53:15 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 20:53:15 2011] Source does appear to be extended
[Tue Oct 18 20:53:15 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.78
[Tue Oct 18 20:54:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 20:54:10 2011] Initial guess for spatial extent in simple fitting = 1.04"
[Tue Oct 18 20:54:10 2011] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.091
[Tue Oct 18 20:54:10 2011] Giving source the simple spatial ID 56 for pass 1, mean size = 1.04"
[Tue Oct 18 20:54:18 2011] fullrun_ccd3_acisf10955_pi14-548_cl_pass1_src56.ximg exists
[Tue Oct 18 20:54:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10955_pi14-548_cl_pass1_src56.csv
[Tue Oct 18 20:54:18 2011] fullrun_ccd3_acisf10955_pi14-548_cl_pass1_src56_1.ximg exists
[Tue Oct 18 20:54:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10955_pi14-548_cl_pass1_src56.csv
[Tue Oct 18 20:54:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10955_pi14-548_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10955_pi14-548_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 20:54:19 2011] fullrun_ccd3_acisf10955_pi14-548_cl_pass1_tfrozen_src56.ximg exists
[Tue Oct 18 20:54:19 2011] fullrun_ccd3_acisf10955_pi14-548_cl_pass1_tfrozen_src56_1.ximg exists
[Tue Oct 18 20:54:19 2011] Fit fullrun_ccd3_acisf10955_pi14-548_cl_pass1_tfrozen_src56 appears to have run properly
[Tue Oct 18 20:54:56 2011] Spatial fit model total counts = 18.370000, observed total counts = 19.000000
[Tue Oct 18 20:54:56 2011] Offset between fit and detection position for source 56 = 0.769010 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 0.769010 pixels
  Position = (520.6, 250.8) = 20 33 21.73 41 15 11.5
  Extent = 1.1 (0.7-1.6)", rotation angle = 0
  Source counts = 17.5 +/- 4.2
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Tue Oct 18 20:54:56 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 20:54:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 20:54:56 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 20:54:56 2011] Source does appear to be extended
[Tue Oct 18 20:54:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 22:13:28 2011] Not overwriting source region fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src56_src.reg
[Tue Oct 18 22:13:28 2011] Extracting stamp from image fullrun_ccd3_acisf10955_pi14-548_cl_sm2.00.img.gz, (471, 201) - (570, 300)
[Tue Oct 18 22:13:28 2011] Writing fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src56.gif
[Tue Oct 18 22:42:08 2011] ../../acisf10955/products/events/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src56_src.evt and ../../acisf10955/products/events/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src56_bgd.evt exist, delete to re-create
[Tue Oct 18 22:42:08 2011] Size of ../../acisf10955/products/events/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src56_src.evt.gz[events] = 19 counts
[Tue Oct 18 22:42:08 2011] Mean chipx,y = (992.32, 469.47)
[Tue Oct 18 22:42:08 2011] Mean tdetx,y = (4662.53, 4053.32)
[Tue Oct 18 22:42:08 2011] chipx,y range = (975.00-1013.00, 449.00-487.00)
[Tue Oct 18 22:42:08 2011] Size of ../../acisf10955/products/events/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src56_bgd.evt.gz[events] = 39 counts
[Tue Oct 18 22:42:09 2011] ../../acisf10955/products/images/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src56_src.img and ../../acisf10955/products/images/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src56_bgd.img exist, delete to re-create
[Tue Oct 18 22:42:09 2011] Not generating rmf since there are only 17 counts
[Tue Oct 18 22:42:09 2011] arf not found, will run specextract
[Tue Oct 18 22:42:37 2011] ../../acisf10955/products/spectra/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src56.warf not found
[Tue Oct 18 22:42:37 2011] ../../acisf10955/products/spectra/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src56.wrmf not found
[Tue Oct 18 22:42:37 2011] Removal of ../../acisf10955/products/spectra/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src56.soff failed
[Tue Oct 18 22:42:42 2011] ../../acisf10955/products/lightcurves/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src56_src.lc and ../../acisf10955/products/lightcurves/fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src56_bgd.lc exist, delete to re-create
[Tue Oct 18 23:11:06 2011] Spectrum 56 has only 18 counts, deleting rmf
[Tue Oct 18 23:11:06 2011] 192.446
[Tue Oct 18 23:13:46 2011] Updating aperture counts using extracted products
[Tue Oct 18 23:13:46 2011] Error reading totcts from fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src56_src.pi.gz
[Tue Oct 18 23:13:47 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 23:13:47 2011] Using photon index=1.80, rate=0.000637, arf fullrun_ccd3_acisf10955_pi14-548_pass1_cl_src56.arf
[Tue Oct 18 23:13:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 23:13:47 2011] Updating source flux to 9.9e-15
[Tue Oct 18 23:14:16 2011] Source 56 has fewer than 100.000000 counts, skipping spectral fitting