[Tue Oct 18 20:50:35 2011] Detection parameters:
  Position = (901.2, 39.6) = 20 33 45.42 41 17 31.0
  Extent = 0.5" x 0.5", rotation angle = 68 degrees
  Source counts = 10.3 +/- 3.3
  Background counts = 0.7
  Rate = 0.0004 +/- 0.0001

[Tue Oct 18 20:50:37 2011] Off-axis axis estimate = 0.56'
[Tue Oct 18 20:52:27 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 20:52:27 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Tue Oct 18 20:52:27 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.348
[Tue Oct 18 20:52:27 2011] Giving source the simple spatial ID 34 for pass 0, mean size = 0.39"
[Tue Oct 18 20:52:28 2011] fullrun_ccd2_acisf10955_pi14-548_cl_pass0_src34.ximg exists
[Tue Oct 18 20:52:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10955_pi14-548_cl_pass0_src34.csv
[Tue Oct 18 20:52:28 2011] fullrun_ccd2_acisf10955_pi14-548_cl_pass0_src34_1.ximg exists
[Tue Oct 18 20:52:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10955_pi14-548_cl_pass0_src34.csv
[Tue Oct 18 20:52:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10955_pi14-548_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10955_pi14-548_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 20:52:29 2011] fullrun_ccd2_acisf10955_pi14-548_cl_pass0_tfrozen_src34.ximg exists
[Tue Oct 18 20:52:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10955_pi14-548_cl_pass0_tfrozen_src34.csv
[Tue Oct 18 20:52:29 2011] fullrun_ccd2_acisf10955_pi14-548_cl_pass0_tfrozen_src34_1.ximg exists
[Tue Oct 18 20:52:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10955_pi14-548_cl_pass0_tfrozen_src34.csv
[Tue Oct 18 20:52:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10955_pi14-548_cl_pass0_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10955_pi14-548_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 20:53:04 2011] Spatial fit model total counts = 13.191100, observed total counts = 16.000000
[Tue Oct 18 20:53:04 2011] Offset between fit and detection position for source 36 = 0.739571 pixels
[Tue Oct 18 20:53:04 2011] 11.764525 total counts/ 0.836125 bgd. counts: snr = 11.951460
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.739571 pixels
  Position = (901.7, 40.1) = 20 33 45.42 41 17 31.0
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 10.9 +/- 3.4
  Background counts = 0.8
  Rate = 0.0004 +/- 0.0001
[Tue Oct 18 20:53:04 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 20:53:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 20:53:04 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 20:53:04 2011] Source does appear to be extended
[Tue Oct 18 20:53:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 20:54:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 20:54:04 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Tue Oct 18 20:54:04 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.108
[Tue Oct 18 20:54:04 2011] Giving source the simple spatial ID 34 for pass 1, mean size = 0.46"
[Tue Oct 18 20:54:09 2011] fullrun_ccd2_acisf10955_pi14-548_cl_pass1_src34.ximg exists
[Tue Oct 18 20:54:09 2011] fullrun_ccd2_acisf10955_pi14-548_cl_pass1_src34_1.ximg exists
[Tue Oct 18 20:54:09 2011] Fit fullrun_ccd2_acisf10955_pi14-548_cl_pass1_src34 appears to have run properly
[Tue Oct 18 20:54:10 2011] fullrun_ccd2_acisf10955_pi14-548_cl_pass1_tfrozen_src34.ximg exists
[Tue Oct 18 20:54:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10955_pi14-548_cl_pass1_tfrozen_src34.csv
[Tue Oct 18 20:54:10 2011] fullrun_ccd2_acisf10955_pi14-548_cl_pass1_tfrozen_src34_1.ximg exists
[Tue Oct 18 20:54:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10955_pi14-548_cl_pass1_tfrozen_src34.csv
[Tue Oct 18 20:54:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10955_pi14-548_cl_pass1_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10955_pi14-548_cl_pass1_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 20:54:46 2011] Spatial fit model total counts = 13.070200, observed total counts = 16.000000
[Tue Oct 18 20:54:46 2011] Offset between fit and detection position for source 36 = 0.028552 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.028552 pixels
  Position = (901.8, 40.1) = 20 33 45.41 41 17 31.0
  Extent = 0.5 (0.3-0.6)", rotation angle = 0
  Source counts = 11.4 +/- 3.4
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Tue Oct 18 20:54:46 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 20:54:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 20:54:46 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 20:54:46 2011] Source does appear to be extended
[Tue Oct 18 20:54:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 21:37:49 2011] Not overwriting source region fullrun_ccd2_acisf10955_pi14-548_pass1_cl_src36_src.reg
[Tue Oct 18 21:37:49 2011] Extracting stamp from image fullrun_ccd2_acisf10955_pi14-548_cl_sm2.00.img.gz, (881, 19) - (923, 61)
[Tue Oct 18 21:37:49 2011] Writing fullrun_ccd2_acisf10955_pi14-548_pass1_cl_src36.gif
[Tue Oct 18 21:56:10 2011] ../../acisf10955/products/events/fullrun_ccd2_acisf10955_pi14-548_pass1_cl_src36_src.evt and ../../acisf10955/products/events/fullrun_ccd2_acisf10955_pi14-548_pass1_cl_src36_bgd.evt exist, delete to re-create
[Tue Oct 18 21:56:10 2011] Size of ../../acisf10955/products/events/fullrun_ccd2_acisf10955_pi14-548_pass1_cl_src36_src.evt.gz[events] = 11 counts
[Tue Oct 18 21:56:10 2011] Mean chipx,y = (35.09, 990.91)
[Tue Oct 18 21:56:10 2011] Mean tdetx,y = (4051.91, 4050.91)
[Tue Oct 18 21:56:10 2011] chipx,y range = (16.00-53.00, 974.00-1006.00)
[Tue Oct 18 21:56:10 2011] Size of ../../acisf10955/products/events/fullrun_ccd2_acisf10955_pi14-548_pass1_cl_src36_bgd.evt.gz[events] = 9 counts
[Tue Oct 18 21:56:10 2011] ../../acisf10955/products/images/fullrun_ccd2_acisf10955_pi14-548_pass1_cl_src36_src.img and ../../acisf10955/products/images/fullrun_ccd2_acisf10955_pi14-548_pass1_cl_src36_bgd.img exist, delete to re-create
[Tue Oct 18 21:56:10 2011] Not generating rmf since there are only 11 counts
[Tue Oct 18 21:56:10 2011] arf not found, will run specextract
[Tue Oct 18 21:56:40 2011] ../../acisf10955/products/spectra/fullrun_ccd2_acisf10955_pi14-548_pass1_cl_src36.warf not found
[Tue Oct 18 21:56:40 2011] ../../acisf10955/products/spectra/fullrun_ccd2_acisf10955_pi14-548_pass1_cl_src36.wrmf not found
[Tue Oct 18 21:56:40 2011] Removal of ../../acisf10955/products/spectra/fullrun_ccd2_acisf10955_pi14-548_pass1_cl_src36.soff failed
[Tue Oct 18 21:56:46 2011] ../../acisf10955/products/lightcurves/fullrun_ccd2_acisf10955_pi14-548_pass1_cl_src36_src.lc and ../../acisf10955/products/lightcurves/fullrun_ccd2_acisf10955_pi14-548_pass1_cl_src36_bgd.lc exist, delete to re-create
[Tue Oct 18 22:13:26 2011] Spectrum 36 has only 11 counts, deleting rmf
[Tue Oct 18 22:13:26 2011] 196.522
[Tue Oct 18 23:13:44 2011] Updating aperture counts using extracted products
[Tue Oct 18 23:13:44 2011] Error reading totcts from fullrun_ccd2_acisf10955_pi14-548_pass1_cl_src36_src.pi.gz
[Tue Oct 18 23:13:45 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 23:13:45 2011] Using photon index=1.80, rate=0.000416, arf fullrun_ccd2_acisf10955_pi14-548_pass1_cl_src36.arf
[Tue Oct 18 23:13:45 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 23:13:45 2011] Updating source flux to 6.4e-15
[Tue Oct 18 23:14:15 2011] Source 36 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Oct 18 23:14:16 2011] acisf10955/analysis//spectral/fullrun_ccd2_acisf10955_pi14-548_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete