[Tue Oct 18 20:50:24 2011] Detection parameters:
  Position = (591.4, 652.2) = 20 34 19.52 41 14 53.5
  Extent = 1.4" x 0.7", rotation angle = 45 degrees
  Source counts = 11.2 +/- 3.7
  Background counts = 2.8
  Rate = 0.0004 +/- 0.0001

[Tue Oct 18 20:50:25 2011] Off-axis axis estimate = 7.48'
[Tue Oct 18 20:52:21 2011] Using EEF radius (= 2.48 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 20:52:21 2011] Initial guess for spatial extent in simple fitting = 2.48"
[Tue Oct 18 20:52:21 2011] source mask rpix=5.0, npix_max = 122, mask sum = 121, frac = 0.987
[Tue Oct 18 20:52:21 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 2.48"
[Tue Oct 18 20:52:23 2011] fullrun_ccd0_acisf10955_pi14-548_cl_pass0_src21.ximg exists
[Tue Oct 18 20:52:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10955_pi14-548_cl_pass0_src21.csv
[Tue Oct 18 20:52:23 2011] fullrun_ccd0_acisf10955_pi14-548_cl_pass0_src21_1.ximg exists
[Tue Oct 18 20:52:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10955_pi14-548_cl_pass0_src21.csv
[Tue Oct 18 20:52:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10955_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10955_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 20:52:23 2011] fullrun_ccd0_acisf10955_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Tue Oct 18 20:52:23 2011] fullrun_ccd0_acisf10955_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Tue Oct 18 20:52:23 2011] Fit fullrun_ccd0_acisf10955_pi14-548_cl_pass0_tfrozen_src21 appears to have run properly
[Tue Oct 18 20:52:52 2011] Spatial fit model total counts = 27.259300, observed total counts = 29.000000
[Tue Oct 18 20:52:52 2011] Offset between fit and detection position for source 32 = 5.013252 pixels
[Tue Oct 18 20:52:52 2011] 25.864800 total counts/ 0.000000 bgd. counts: snr = 696848067651022.375000
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 5.013252 pixels
  Position = (596.4, 652.9) = 20 34 19.32 41 14 53.6
  Extent = 2.8 (1.9-3.8)", rotation angle = 0
  Source counts = 25.9 +/- 5.1
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Tue Oct 18 20:52:52 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 20:52:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 20:52:52 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 20:52:52 2011] Source does appear to be extended
[Tue Oct 18 20:52:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 20:53:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 20:53:54 2011] Initial guess for spatial extent in simple fitting = 2.81"
[Tue Oct 18 20:53:54 2011] source mask rpix=5.7, npix_max = 154, mask sum = 156, frac = 1.009
[Tue Oct 18 20:53:54 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 2.81"
[Tue Oct 18 20:53:57 2011] fullrun_ccd0_acisf10955_pi14-548_cl_pass1_src20.ximg exists
[Tue Oct 18 20:53:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10955_pi14-548_cl_pass1_src20.csv
[Tue Oct 18 20:53:57 2011] fullrun_ccd0_acisf10955_pi14-548_cl_pass1_src20_1.ximg exists
[Tue Oct 18 20:53:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10955_pi14-548_cl_pass1_src20.csv
[Tue Oct 18 20:53:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10955_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10955_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 20:53:57 2011] fullrun_ccd0_acisf10955_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Tue Oct 18 20:53:57 2011] fullrun_ccd0_acisf10955_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Tue Oct 18 20:53:57 2011] Fit fullrun_ccd0_acisf10955_pi14-548_cl_pass1_tfrozen_src20 appears to have run properly
[Tue Oct 18 20:54:32 2011] Warning, spatial fit 20 centroid is now closest to src. 7
[Tue Oct 18 20:54:32 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 20:54:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 20:54:32 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 20:54:32 2011] Source does appear to be extended
[Tue Oct 18 20:54:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 20:55:33 2011] Not overwriting source region fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src32_src.reg
[Tue Oct 18 20:55:33 2011] Extracting stamp from image fullrun_ccd0_acisf10955_pi14-548_cl_sm2.00.img.gz, (468, 524) - (725, 782)
[Tue Oct 18 20:55:33 2011] Writing fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src32.gif
[Tue Oct 18 21:08:00 2011] ../../acisf10955/products/events/fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src32_src.evt and ../../acisf10955/products/events/fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src32_bgd.evt exist, delete to re-create
[Tue Oct 18 21:08:00 2011] Size of ../../acisf10955/products/events/fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src32_src.evt.gz[events] = 34 counts
[Tue Oct 18 21:08:00 2011] Mean chipx,y = (429.50, 440.91)
[Tue Oct 18 21:08:00 2011] Mean tdetx,y = (3501.91, 4702.50)
[Tue Oct 18 21:08:00 2011] chipx,y range = (400.00-453.00, 414.00-469.00)
[Tue Oct 18 21:08:00 2011] Size of ../../acisf10955/products/events/fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src32_bgd.evt.gz[events] = 187 counts
[Tue Oct 18 21:08:00 2011] ../../acisf10955/products/images/fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src32_src.img and ../../acisf10955/products/images/fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src32_bgd.img exist, delete to re-create
[Tue Oct 18 21:08:00 2011] Not generating rmf since there are only 25 counts
[Tue Oct 18 21:08:00 2011] arf not found, will run specextract
[Tue Oct 18 21:08:29 2011] ../../acisf10955/products/spectra/fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src32.warf not found
[Tue Oct 18 21:08:29 2011] ../../acisf10955/products/spectra/fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src32.wrmf not found
[Tue Oct 18 21:08:29 2011] Removal of ../../acisf10955/products/spectra/fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src32.soff failed
[Tue Oct 18 21:08:34 2011] ../../acisf10955/products/lightcurves/fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src32_src.lc and ../../acisf10955/products/lightcurves/fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src32_bgd.lc exist, delete to re-create
[Tue Oct 18 21:11:36 2011] Spectrum 32 has only 26 counts, deleting rmf
[Tue Oct 18 21:11:36 2011] 173.965
[Tue Oct 18 23:13:41 2011] Updating aperture counts using extracted products
[Tue Oct 18 23:13:41 2011] Error reading totcts from fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src32_src.pi.gz
[Tue Oct 18 23:13:42 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 23:13:42 2011] Using photon index=1.80, rate=0.000941, arf fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src32.arf
[Tue Oct 18 23:13:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 23:13:42 2011] Updating source flux to 1.6e-14
[Tue Oct 18 23:13:56 2011] Source 32 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Oct 18 23:13:57 2011] acisf10955/analysis//spectral/fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src32_pl.csv not found, spectral fit skipped or did not complete