[Tue Oct 18 20:50:24 2011] Detection parameters:
  Position = (907.9, 1056.4) = 20 34 5.74 41 18 12.6
  Extent = 0.9" x 0.6", rotation angle = 180 degrees
  Source counts = 12.6 +/- 3.7
  Background counts = 1.4
  Rate = 0.0005 +/- 0.0001

[Tue Oct 18 20:50:25 2011] Off-axis axis estimate = 4.40'
[Tue Oct 18 20:52:21 2011] Using EEF radius (= 0.96 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 20:52:21 2011] Initial guess for spatial extent in simple fitting = 0.96"
[Tue Oct 18 20:52:21 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.043
[Tue Oct 18 20:52:21 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 0.96"
[Tue Oct 18 20:52:23 2011] fullrun_ccd0_acisf10955_pi14-548_cl_pass0_src18.ximg exists
[Tue Oct 18 20:52:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10955_pi14-548_cl_pass0_src18.csv
[Tue Oct 18 20:52:23 2011] fullrun_ccd0_acisf10955_pi14-548_cl_pass0_src18_1.ximg exists
[Tue Oct 18 20:52:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10955_pi14-548_cl_pass0_src18.csv
[Tue Oct 18 20:52:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10955_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10955_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 20:52:23 2011] fullrun_ccd0_acisf10955_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Tue Oct 18 20:52:23 2011] fullrun_ccd0_acisf10955_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Tue Oct 18 20:52:23 2011] Fit fullrun_ccd0_acisf10955_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Tue Oct 18 20:52:52 2011] Spatial fit model total counts = 15.465400, observed total counts = 16.000000
[Tue Oct 18 20:52:52 2011] Offset between fit and detection position for source 28 = 0.552101 pixels
[Tue Oct 18 20:52:52 2011] 15.896040 total counts/ 1.949640 bgd. counts: snr = 9.988147
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.552101 pixels
  Position = (908.2, 1056.8) = 20 34 5.74 41 18 12.5
  Extent = 1.0 (0.7-1.6)", rotation angle = 0
  Source counts = 13.9 +/- 4.0
  Background counts = 1.9
  Rate = 0.0005 +/- 0.0001
[Tue Oct 18 20:52:52 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 20:52:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 20:52:52 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 20:52:52 2011] Source does appear to be extended
[Tue Oct 18 20:52:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 20:53:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 20:53:54 2011] Initial guess for spatial extent in simple fitting = 1.01"
[Tue Oct 18 20:53:54 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.964
[Tue Oct 18 20:53:54 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 1.01"
[Tue Oct 18 20:53:57 2011] fullrun_ccd0_acisf10955_pi14-548_cl_pass1_src17.ximg exists
[Tue Oct 18 20:53:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10955_pi14-548_cl_pass1_src17.csv
[Tue Oct 18 20:53:57 2011] fullrun_ccd0_acisf10955_pi14-548_cl_pass1_src17_1.ximg exists
[Tue Oct 18 20:53:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10955_pi14-548_cl_pass1_src17.csv
[Tue Oct 18 20:53:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10955_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10955_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 20:53:57 2011] fullrun_ccd0_acisf10955_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Tue Oct 18 20:53:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10955_pi14-548_cl_pass1_tfrozen_src17.csv
[Tue Oct 18 20:53:57 2011] fullrun_ccd0_acisf10955_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Tue Oct 18 20:53:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10955_pi14-548_cl_pass1_tfrozen_src17.csv
[Tue Oct 18 20:53:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10955_pi14-548_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10955_pi14-548_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 20:54:32 2011] Spatial fit model total counts = 14.916100, observed total counts = 16.000000
[Tue Oct 18 20:54:32 2011] Offset between fit and detection position for source 28 = 0.282868 pixels
[Tue Oct 18 20:54:32 2011] 15.267470 total counts/ 1.964170 bgd. counts: snr = 9.492265
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.282868 pixels
  Position = (908.5, 1056.7) = 20 34 5.73 41 18 12.5
  Extent = 1.0 (0.5-1.5)", rotation angle = 0
  Source counts = 13.3 +/- 3.9
  Background counts = 2.0
  Rate = 0.0005 +/- 0.0001
[Tue Oct 18 20:54:32 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 20:54:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 20:54:32 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 20:54:32 2011] Source does appear to be extended
[Tue Oct 18 20:54:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 20:55:33 2011] Not overwriting source region fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src28_src.reg
[Tue Oct 18 20:55:33 2011] Extracting stamp from image fullrun_ccd0_acisf10955_pi14-548_cl_sm2.00.img.gz, (863, 1011) - (954, 1103)
[Tue Oct 18 20:55:33 2011] Writing fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src28.gif
[Tue Oct 18 21:06:23 2011] ../../acisf10955/products/events/fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src28_src.evt and ../../acisf10955/products/events/fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src28_bgd.evt exist, delete to re-create
[Tue Oct 18 21:06:23 2011] Size of ../../acisf10955/products/events/fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src28_src.evt.gz[events] = 14 counts
[Tue Oct 18 21:06:23 2011] Mean chipx,y = (944.07, 529.07)
[Tue Oct 18 21:06:23 2011] Mean tdetx,y = (3590.07, 4187.93)
[Tue Oct 18 21:06:23 2011] chipx,y range = (923.00-957.00, 518.00-540.00)
[Tue Oct 18 21:06:23 2011] Size of ../../acisf10955/products/events/fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 30 counts
[Tue Oct 18 21:06:23 2011] ../../acisf10955/products/images/fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src28_src.img and ../../acisf10955/products/images/fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src28_bgd.img exist, delete to re-create
[Tue Oct 18 21:06:23 2011] Not generating rmf since there are only 13 counts
[Tue Oct 18 21:06:23 2011] arf not found, will run specextract
[Tue Oct 18 21:06:46 2011] ../../acisf10955/products/spectra/fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src28.warf not found
[Tue Oct 18 21:06:46 2011] ../../acisf10955/products/spectra/fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src28.wrmf not found
[Tue Oct 18 21:06:46 2011] Removal of ../../acisf10955/products/spectra/fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src28.soff failed
[Tue Oct 18 21:06:52 2011] ../../acisf10955/products/lightcurves/fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src28_src.lc and ../../acisf10955/products/lightcurves/fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src28_bgd.lc exist, delete to re-create
[Tue Oct 18 21:11:36 2011] Spectrum 28 has only 13 counts, deleting rmf
[Tue Oct 18 21:11:36 2011] 178.025
[Tue Oct 18 23:13:41 2011] Updating aperture counts using extracted products
[Tue Oct 18 23:13:41 2011] Error reading totcts from fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src28_src.pi.gz
[Tue Oct 18 23:13:42 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 23:13:42 2011] Using photon index=1.80, rate=0.000484, arf fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src28.arf
[Tue Oct 18 23:13:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 23:13:42 2011] Updating source flux to 8.1e-15
[Tue Oct 18 23:13:56 2011] Source 28 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Oct 18 23:13:57 2011] acisf10955/analysis//spectral/fullrun_ccd0_acisf10955_pi14-548_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete