[Thu Sep 29 05:58:06 2011] Detection parameters:
  Position = (319.9, 759.7) = 20 34 7.75 41 23 52.1
  Extent = 0.8" x 0.5", rotation angle = 106 degrees
  Source counts = 15.8 +/- 4.1
  Background counts = 1.2
  Rate = 0.0005 +/- 0.0001

[Thu Sep 29 05:58:13 2011] Off-axis axis estimate = 3.56'
[Thu Sep 29 05:59:30 2011] Using EEF radius (= 0.71 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 05:59:30 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Thu Sep 29 05:59:30 2011] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.064
[Thu Sep 29 05:59:30 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 0.71"
[Thu Sep 29 05:59:31 2011] fullrun_ccd3_acisf10954_pi14-548_cl_pass0_src26.ximg exists
[Thu Sep 29 05:59:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10954_pi14-548_cl_pass0_src26.csv
[Thu Sep 29 05:59:31 2011] fullrun_ccd3_acisf10954_pi14-548_cl_pass0_src26_1.ximg exists
[Thu Sep 29 05:59:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10954_pi14-548_cl_pass0_src26.csv
[Thu Sep 29 05:59:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10954_pi14-548_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10954_pi14-548_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 05:59:33 2011] fullrun_ccd3_acisf10954_pi14-548_cl_pass0_tfrozen_src26.ximg exists
[Thu Sep 29 05:59:33 2011] fullrun_ccd3_acisf10954_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists
[Thu Sep 29 05:59:33 2011] Fit fullrun_ccd3_acisf10954_pi14-548_cl_pass0_tfrozen_src26 appears to have run properly
[Thu Sep 29 05:59:53 2011] Spatial fit model total counts = 18.961100, observed total counts = 19.000000
[Thu Sep 29 05:59:53 2011] Offset between fit and detection position for source 8 = 0.737173 pixels
[Thu Sep 29 05:59:53 2011] 19.590040 total counts/ 6.212440 bgd. counts: snr = 5.367192
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.737173 pixels
  Position = (320.5, 760.1) = 20 34 7.75 41 23 52.1
  Extent = 0.6 (0.4-1.2)", rotation angle = 0
  Source counts = 13.4 +/- 4.4
  Background counts = 6.2
  Rate = 0.0005 +/- 0.0002
[Thu Sep 29 05:59:53 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 05:59:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 05:59:53 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 05:59:53 2011] Source does appear to be extended
[Thu Sep 29 05:59:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 06:01:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 06:01:01 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Thu Sep 29 06:01:01 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.958
[Thu Sep 29 06:01:01 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 0.62"
[Thu Sep 29 06:01:02 2011] fullrun_ccd3_acisf10954_pi14-548_cl_pass1_src25.ximg exists
[Thu Sep 29 06:01:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10954_pi14-548_cl_pass1_src25.csv
[Thu Sep 29 06:01:02 2011] fullrun_ccd3_acisf10954_pi14-548_cl_pass1_src25_1.ximg exists
[Thu Sep 29 06:01:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10954_pi14-548_cl_pass1_src25.csv
[Thu Sep 29 06:01:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10954_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10954_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 06:01:05 2011] fullrun_ccd3_acisf10954_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Thu Sep 29 06:01:05 2011] fullrun_ccd3_acisf10954_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Thu Sep 29 06:01:05 2011] Fit fullrun_ccd3_acisf10954_pi14-548_cl_pass1_tfrozen_src25 appears to have run properly
[Thu Sep 29 06:01:39 2011] Spatial fit model total counts = 18.643700, observed total counts = 19.000000
[Thu Sep 29 06:01:39 2011] Offset between fit and detection position for source 8 = 0.111140 pixels
[Thu Sep 29 06:01:39 2011] 19.128370 total counts/ 5.665770 bgd. counts: snr = 5.655871
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.111140 pixels
  Position = (320.4, 760.2) = 20 34 7.75 41 23 52.1
  Extent = 0.7 (0.4-1.2)", rotation angle = 0
  Source counts = 13.5 +/- 4.4
  Background counts = 5.7
  Rate = 0.0005 +/- 0.0001
[Thu Sep 29 06:01:39 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 06:01:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 06:01:39 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 06:01:39 2011] Source does appear to be extended
[Thu Sep 29 06:01:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 06:10:35 2011] Not overwriting source region fullrun_ccd3_acisf10954_pi14-548_pass1_cl_src8_src.reg
[Thu Sep 29 06:10:35 2011] Extracting stamp from image fullrun_ccd3_acisf10954_pi14-548_cl_sm2.00.img.gz, (289, 729) - (352, 791)
[Thu Sep 29 06:10:35 2011] Writing fullrun_ccd3_acisf10954_pi14-548_pass1_cl_src8.gif
[Thu Sep 29 06:13:15 2011] ../../acisf10954/products/events/fullrun_ccd3_acisf10954_pi14-548_pass1_cl_src8_src.evt and ../../acisf10954/products/events/fullrun_ccd3_acisf10954_pi14-548_pass1_cl_src8_bgd.evt exist, delete to re-create
[Thu Sep 29 06:13:15 2011] Size of ../../acisf10954/products/events/fullrun_ccd3_acisf10954_pi14-548_pass1_cl_src8_src.evt.gz[events] = 16 counts
[Thu Sep 29 06:13:15 2011] Mean chipx,y = (547.50, 865.44)
[Thu Sep 29 06:13:15 2011] Mean tdetx,y = (4266.56, 3608.50)
[Thu Sep 29 06:13:15 2011] chipx,y range = (528.00-557.00, 846.00-881.00)
[Thu Sep 29 06:13:15 2011] Size of ../../acisf10954/products/events/fullrun_ccd3_acisf10954_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 25 counts
[Thu Sep 29 06:13:15 2011] ../../acisf10954/products/images/fullrun_ccd3_acisf10954_pi14-548_pass1_cl_src8_src.img and ../../acisf10954/products/images/fullrun_ccd3_acisf10954_pi14-548_pass1_cl_src8_bgd.img exist, delete to re-create
[Thu Sep 29 06:13:15 2011] ../../acisf10954/products/spectra/fullrun_ccd3_acisf10954_pi14-548_pass1_cl_src8_src.pi and ../../acisf10954/products/spectra/fullrun_ccd3_acisf10954_pi14-548_pass1_cl_src8_bgd.pi exist, delete to re-create
[Thu Sep 29 06:13:15 2011] Not generating rmf since there are only 13 counts
[Thu Sep 29 06:13:21 2011] ../../acisf10954/products/lightcurves/fullrun_ccd3_acisf10954_pi14-548_pass1_cl_src8_src.lc and ../../acisf10954/products/lightcurves/fullrun_ccd3_acisf10954_pi14-548_pass1_cl_src8_bgd.lc exist, delete to re-create
[Thu Sep 29 06:17:49 2011] 183.739
[Thu Sep 29 06:18:07 2011] Updating aperture counts using extracted products
[Thu Sep 29 06:18:07 2011] Error reading totcts from fullrun_ccd3_acisf10954_pi14-548_pass1_cl_src8_src.pi.gz
[Thu Sep 29 06:18:08 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 06:18:08 2011] Using photon index=1.80, rate=0.000462, arf fullrun_ccd3_acisf10954_pi14-548_pass1_cl_src8.arf
[Thu Sep 29 06:18:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 06:18:08 2011] Updating source flux to 7.5e-15
[Thu Sep 29 06:18:34 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting