[Fri Oct 21 11:15:26 2011] Detection parameters:
  Position = (816.7, 437.5) = 20 31 52.88 41 10 13.7
  Extent = 1.3" x 0.9", rotation angle = 159 degrees
  Source counts = 13.5 +/- 4.1
  Background counts = 3.5
  Rate = 0.0005 +/- 0.0001

[Fri Oct 21 11:15:29 2011] Off-axis axis estimate = 6.40'
[Fri Oct 21 11:16:59 2011] Using EEF radius (= 1.84 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 11:16:59 2011] Initial guess for spatial extent in simple fitting = 1.84"
[Fri Oct 21 11:16:59 2011] source mask rpix=3.7, npix_max = 71, mask sum = 81, frac = 1.127
[Fri Oct 21 11:16:59 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 1.84"
[Fri Oct 21 11:17:00 2011] fullrun_ccd3_acisf10953_pi14-548_cl_pass0_src23.ximg exists
[Fri Oct 21 11:17:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10953_pi14-548_cl_pass0_src23.csv
[Fri Oct 21 11:17:00 2011] fullrun_ccd3_acisf10953_pi14-548_cl_pass0_src23_1.ximg exists
[Fri Oct 21 11:17:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10953_pi14-548_cl_pass0_src23.csv
[Fri Oct 21 11:17:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10953_pi14-548_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10953_pi14-548_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 11:17:01 2011] fullrun_ccd3_acisf10953_pi14-548_cl_pass0_tfrozen_src23.ximg exists
[Fri Oct 21 11:17:01 2011] fullrun_ccd3_acisf10953_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Oct 21 11:17:01 2011] Fit fullrun_ccd3_acisf10953_pi14-548_cl_pass0_tfrozen_src23 appears to have run properly
[Fri Oct 21 11:17:26 2011] Spatial fit model total counts = 18.736700, observed total counts = 19.000000
[Fri Oct 21 11:17:26 2011] Offset between fit and detection position for source 5 = 2.032241 pixels
[Fri Oct 21 11:17:26 2011] 18.580600 total counts/ 5.907800 bgd. counts: snr = 5.213864
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 2.032241 pixels
  Position = (818.7, 437.8) = 20 31 52.82 41 10 13.6
  Extent = 0.8 (0.5-1.1)", rotation angle = 0
  Source counts = 12.7 +/- 4.3
  Background counts = 5.9
  Rate = 0.0004 +/- 0.0001
[Fri Oct 21 11:17:26 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 11:17:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 11:17:26 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 11:17:26 2011] Source does appear to be extended
[Fri Oct 21 11:17:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 11:18:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 11:18:00 2011] Initial guess for spatial extent in simple fitting = 0.84"
[Fri Oct 21 11:18:00 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.825
[Fri Oct 21 11:18:00 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 0.84"
[Fri Oct 21 11:18:01 2011] fullrun_ccd3_acisf10953_pi14-548_cl_pass1_src23.ximg exists
[Fri Oct 21 11:18:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10953_pi14-548_cl_pass1_src23.csv
[Fri Oct 21 11:18:01 2011] fullrun_ccd3_acisf10953_pi14-548_cl_pass1_src23_1.ximg exists
[Fri Oct 21 11:18:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10953_pi14-548_cl_pass1_src23.csv
[Fri Oct 21 11:18:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10953_pi14-548_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10953_pi14-548_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 11:18:01 2011] fullrun_ccd3_acisf10953_pi14-548_cl_pass1_tfrozen_src23.ximg exists
[Fri Oct 21 11:18:01 2011] fullrun_ccd3_acisf10953_pi14-548_cl_pass1_tfrozen_src23_1.ximg exists
[Fri Oct 21 11:18:01 2011] Fit fullrun_ccd3_acisf10953_pi14-548_cl_pass1_tfrozen_src23 appears to have run properly
[Fri Oct 21 11:18:24 2011] Spatial fit model total counts = 15.967200, observed total counts = 16.000000
[Fri Oct 21 11:18:24 2011] Offset between fit and detection position for source 5 = 0.024946 pixels
[Fri Oct 21 11:18:24 2011] 15.618000 total counts/ 2.867900 bgd. counts: snr = 7.528901
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.024946 pixels
  Position = (818.7, 437.9) = 20 31 52.82 41 10 13.6
  Extent = 0.8 (0.5-1.2)", rotation angle = 0
  Source counts = 12.8 +/- 4.0
  Background counts = 2.9
  Rate = 0.0004 +/- 0.0001
[Fri Oct 21 11:18:24 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 11:18:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 11:18:24 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 11:18:24 2011] Source does appear to be extended
[Fri Oct 21 11:18:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 11:24:51 2011] Not overwriting source region fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src5_src.reg
[Fri Oct 21 11:24:51 2011] Extracting stamp from image fullrun_ccd3_acisf10953_pi14-548_cl_sm2.00.img.gz, (782, 401) - (856, 475)
[Fri Oct 21 11:24:51 2011] Writing fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src5.gif
[Fri Oct 21 11:25:53 2011] ../../acisf10953/products/events/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src5_src.evt and ../../acisf10953/products/events/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Fri Oct 21 11:25:53 2011] Size of ../../acisf10953/products/events/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src5_src.evt.gz[events] = 13 counts
[Fri Oct 21 11:25:53 2011] Mean chipx,y = (672.77, 289.00)
[Fri Oct 21 11:25:53 2011] Mean tdetx,y = (4843.00, 3733.77)
[Fri Oct 21 11:25:53 2011] chipx,y range = (660.00-692.00, 272.00-305.00)
[Fri Oct 21 11:25:53 2011] Size of ../../acisf10953/products/events/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 31 counts
[Fri Oct 21 11:25:53 2011] ../../acisf10953/products/images/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src5_src.img and ../../acisf10953/products/images/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Fri Oct 21 11:25:53 2011] ../../acisf10953/products/spectra/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src5_src.pi and ../../acisf10953/products/spectra/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Fri Oct 21 11:25:53 2011] Not generating rmf since there are only 12 counts
[Fri Oct 21 11:25:56 2011] ../../acisf10953/products/lightcurves/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src5_src.lc and ../../acisf10953/products/lightcurves/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Fri Oct 21 11:26:37 2011] 175.554
[Fri Oct 21 11:26:52 2011] Updating aperture counts using extracted products
[Fri Oct 21 11:26:52 2011] Error reading totcts from fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src5_src.pi.gz
[Fri Oct 21 11:26:53 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 11:26:53 2011] Using photon index=1.80, rate=0.000441, arf fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src5.arf
[Fri Oct 21 11:26:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 11:26:53 2011] Updating source flux to 7.6e-15
[Fri Oct 21 11:27:46 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting