[Fri Oct 21 11:15:27 2011] Detection parameters:
  Position = (765.9, 153.1) = 20 31 55.12 41 7 53.8
  Extent = 2.0" x 0.9", rotation angle = 113 degrees
  Source counts = 29.8 +/- 6.1
  Background counts = 7.2
  Rate = 0.001 +/- 0.0002

[Fri Oct 21 11:15:29 2011] Off-axis axis estimate = 6.44'
[Fri Oct 21 11:16:59 2011] Using EEF radius (= 1.86 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 11:16:59 2011] Initial guess for spatial extent in simple fitting = 1.86"
[Fri Oct 21 11:16:59 2011] source mask rpix=3.8, npix_max = 73, mask sum = 64, frac = 0.874
[Fri Oct 21 11:16:59 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 1.86"
[Fri Oct 21 11:17:00 2011] fullrun_ccd3_acisf10953_pi14-548_cl_pass0_src11.ximg exists
[Fri Oct 21 11:17:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10953_pi14-548_cl_pass0_src11.csv
[Fri Oct 21 11:17:00 2011] fullrun_ccd3_acisf10953_pi14-548_cl_pass0_src11_1.ximg exists
[Fri Oct 21 11:17:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10953_pi14-548_cl_pass0_src11.csv
[Fri Oct 21 11:17:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10953_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10953_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 11:17:00 2011] fullrun_ccd3_acisf10953_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Fri Oct 21 11:17:00 2011] fullrun_ccd3_acisf10953_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Oct 21 11:17:00 2011] Fit fullrun_ccd3_acisf10953_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Oct 21 11:17:26 2011] Spatial fit model total counts = 36.700900, observed total counts = 37.000000
[Fri Oct 21 11:17:26 2011] Offset between fit and detection position for source 24 = 2.668828 pixels
[Fri Oct 21 11:17:26 2011] 36.454900 total counts/ 10.911700 bgd. counts: snr = 7.732663
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 2.668828 pixels
  Position = (765.6, 155.8) = 20 31 55.16 41 7 54.9
  Extent = 1.3 (0.8-2.2)", rotation angle = 0
  Source counts = 25.5 +/- 6.0
  Background counts = 10.9
  Rate = 0.0009 +/- 0.0002
[Fri Oct 21 11:17:26 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 11:17:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 11:17:26 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 11:17:26 2011] Source does appear to be extended
[Fri Oct 21 11:17:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 11:18:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 11:18:00 2011] Initial guess for spatial extent in simple fitting = 1.26"
[Fri Oct 21 11:18:00 2011] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.961
[Fri Oct 21 11:18:00 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 1.26"
[Fri Oct 21 11:18:01 2011] fullrun_ccd3_acisf10953_pi14-548_cl_pass1_src11.ximg exists
[Fri Oct 21 11:18:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10953_pi14-548_cl_pass1_src11.csv
[Fri Oct 21 11:18:01 2011] fullrun_ccd3_acisf10953_pi14-548_cl_pass1_src11_1.ximg exists
[Fri Oct 21 11:18:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10953_pi14-548_cl_pass1_src11.csv
[Fri Oct 21 11:18:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10953_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10953_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 11:18:01 2011] fullrun_ccd3_acisf10953_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Fri Oct 21 11:18:01 2011] fullrun_ccd3_acisf10953_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Oct 21 11:18:01 2011] Fit fullrun_ccd3_acisf10953_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Oct 21 11:18:24 2011] Spatial fit model total counts = 28.834400, observed total counts = 29.000000
[Fri Oct 21 11:18:24 2011] Offset between fit and detection position for source 24 = 0.837151 pixels
[Fri Oct 21 11:18:24 2011] 27.899440 total counts/ 4.240540 bgd. counts: snr = 11.489046
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.837151 pixels
  Position = (765.6, 156.6) = 20 31 55.15 41 7 55.3
  Extent = 1.1 (0.8-1.4)", rotation angle = 0
  Source counts = 23.7 +/- 5.3
  Background counts = 4.2
  Rate = 0.0008 +/- 0.0002
[Fri Oct 21 11:18:24 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 11:18:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 11:18:24 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 11:18:24 2011] Source does appear to be extended
[Fri Oct 21 11:18:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 11:24:51 2011] Not overwriting source region fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src24_src.reg
[Fri Oct 21 11:24:51 2011] Extracting stamp from image fullrun_ccd3_acisf10953_pi14-548_cl_sm2.00.img.gz, (717, 108) - (814, 205)
[Fri Oct 21 11:24:51 2011] Writing fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src24.gif
[Fri Oct 21 11:25:22 2011] ../../acisf10953/products/events/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src24_src.evt and ../../acisf10953/products/events/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src24_bgd.evt exist, delete to re-create
[Fri Oct 21 11:25:22 2011] Size of ../../acisf10953/products/events/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src24_src.evt.gz[events] = 29 counts
[Fri Oct 21 11:25:22 2011] Mean chipx,y = (958.66, 241.45)
[Fri Oct 21 11:25:22 2011] Mean tdetx,y = (4890.55, 4019.66)
[Fri Oct 21 11:25:22 2011] chipx,y range = (940.00-979.00, 219.00-255.00)
[Fri Oct 21 11:25:22 2011] Size of ../../acisf10953/products/events/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src24_bgd.evt.gz[events] = 68 counts
[Fri Oct 21 11:25:22 2011] ../../acisf10953/products/images/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src24_src.img and ../../acisf10953/products/images/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src24_bgd.img exist, delete to re-create
[Fri Oct 21 11:25:22 2011] ../../acisf10953/products/spectra/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src24_src.pi and ../../acisf10953/products/spectra/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src24_bgd.pi exist, delete to re-create
[Fri Oct 21 11:25:22 2011] Not generating rmf since there are only 23 counts
[Fri Oct 21 11:25:24 2011] ../../acisf10953/products/lightcurves/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src24_src.lc and ../../acisf10953/products/lightcurves/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src24_bgd.lc exist, delete to re-create
[Fri Oct 21 11:26:36 2011] 177.406
[Fri Oct 21 11:26:52 2011] Updating aperture counts using extracted products
[Fri Oct 21 11:26:52 2011] Error reading totcts from fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src24_src.pi.gz
[Fri Oct 21 11:26:52 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 11:26:52 2011] Using photon index=1.80, rate=0.000819, arf fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src24.arf
[Fri Oct 21 11:26:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 11:26:52 2011] Updating source flux to 1.4e-14
[Fri Oct 21 11:27:46 2011] Source 24 has fewer than 100.000000 counts, skipping spectral fitting