[Fri Oct 21 11:15:26 2011] Detection parameters:
  Position = (1169.4, 818.9) = 20 31 37.48 41 13 21.0
  Extent = 1.7" x 1.5", rotation angle = 123 degrees
  Source counts = 549.1 +/- 25.3
  Background counts = 89.9
  Rate = 0.02 +/- 0.0009

[Fri Oct 21 11:15:29 2011] Off-axis axis estimate = 9.79'
[Fri Oct 21 11:16:59 2011] Using EEF radius (= 4.24 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 11:16:59 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 11:16:59 2011] Initial guess for spatial extent in simple fitting = 4.24"
[Fri Oct 21 11:16:59 2011] source mask rpix=8.6, npix_max = 333, mask sum = 324, frac = 0.972
[Fri Oct 21 11:16:59 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 4.24"
[Fri Oct 21 11:17:00 2011] fullrun_ccd3_acisf10953_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 21 11:17:00 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10953_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 11:17:00 2011] fullrun_ccd3_acisf10953_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 21 11:17:00 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10953_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 11:17:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10953_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10953_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 11:17:00 2011] fullrun_ccd3_acisf10953_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 21 11:17:00 2011] fullrun_ccd3_acisf10953_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 21 11:17:00 2011] Fit fullrun_ccd3_acisf10953_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 21 11:17:26 2011] Spatial fit model total counts = 674.865000, observed total counts = 675.000000
[Fri Oct 21 11:17:26 2011] Offset between fit and detection position for source 1 = 0.543106 pixels
[Fri Oct 21 11:17:26 2011] 672.516000 total counts/ 143.914000 bgd. counts: snr = 44.063326
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.543106 pixels
  Position = (1169.4, 819.5) = 20 31 37.50 41 13 21.0
  Extent = 3.3 (3.1-3.6)", rotation angle = 0
  Source counts = 528.6 +/- 25.9
  Background counts = 143.9
  Rate = 0.02 +/- 0.0009
[Fri Oct 21 11:17:26 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 11:17:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 11:17:26 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 11:17:26 2011] Source does appear to be extended
[Fri Oct 21 11:17:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 11:18:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 11:18:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 11:18:00 2011] Initial guess for spatial extent in simple fitting = 3.28"
[Fri Oct 21 11:18:00 2011] source mask rpix=6.7, npix_max = 205, mask sum = 225, frac = 1.096
[Fri Oct 21 11:18:00 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.28"
[Fri Oct 21 11:18:01 2011] fullrun_ccd3_acisf10953_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 21 11:18:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10953_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 11:18:01 2011] fullrun_ccd3_acisf10953_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 21 11:18:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10953_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 11:18:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10953_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10953_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 11:18:01 2011] fullrun_ccd3_acisf10953_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 21 11:18:01 2011] fullrun_ccd3_acisf10953_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 21 11:18:01 2011] Fit fullrun_ccd3_acisf10953_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 21 11:18:24 2011] Spatial fit model total counts = 633.306000, observed total counts = 634.000000
[Fri Oct 21 11:18:24 2011] Offset between fit and detection position for source 1 = 0.186992 pixels
[Fri Oct 21 11:18:24 2011] 630.844000 total counts/ 127.677000 bgd. counts: snr = 44.530320
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.186992 pixels
  Position = (1169.4, 819.6) = 20 31 37.50 41 13 21.1
  Extent = 3.1 (2.9-3.4)", rotation angle = 0
  Source counts = 503.2 +/- 25.1
  Background counts = 127.7
  Rate = 0.02 +/- 0.0009
[Fri Oct 21 11:18:24 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 11:18:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 11:18:24 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 11:18:24 2011] Source does appear to be extended
[Fri Oct 21 11:18:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 11:24:50 2011] Not overwriting source region fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src1_src.reg
[Fri Oct 21 11:24:50 2011] Extracting stamp from image fullrun_ccd3_acisf10953_pi14-548_cl_sm2.00.img.gz, (1026, 677) - (1312, 963)
[Fri Oct 21 11:24:50 2011] Writing fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src1.gif
[Fri Oct 21 11:24:53 2011] ../../acisf10953/products/events/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src1_src.evt and ../../acisf10953/products/events/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct 21 11:24:53 2011] Size of ../../acisf10953/products/events/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src1_src.evt.gz[events] = 605 counts
[Fri Oct 21 11:24:53 2011] Mean chipx,y = (195.57, 95.15)
[Fri Oct 21 11:24:53 2011] Mean tdetx,y = (5036.85, 3256.57)
[Fri Oct 21 11:24:53 2011] chipx,y range = (161.00-231.00, 57.00-129.00)
[Fri Oct 21 11:24:53 2011] Size of ../../acisf10953/products/events/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 341 counts
[Fri Oct 21 11:24:53 2011] ../../acisf10953/products/images/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src1_src.img and ../../acisf10953/products/images/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct 21 11:24:53 2011] ../../acisf10953/products/spectra/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src1_src.pi and ../../acisf10953/products/spectra/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct 21 11:24:55 2011] ../../acisf10953/products/lightcurves/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src1_src.lc and ../../acisf10953/products/lightcurves/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct 21 11:26:36 2011] Keeping rmf generated by specextract
[Fri Oct 21 11:26:36 2011] 153.228
[Fri Oct 21 11:26:52 2011] Updating aperture counts using extracted products
[Fri Oct 21 11:26:52 2011] Error reading totcts from fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct 21 11:26:52 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 11:26:52 2011] Using photon index=1.80, rate=0.0174, arf fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src1.arf
[Fri Oct 21 11:26:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 11:26:52 2011] Updating source flux to 3.4e-13
[Fri Oct 21 11:27:56 2011] Reading fit data from acisf10953/analysis//spectral/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src1_pl.csv
[Fri Oct 21 11:27:56 2011] Spectral fit parameter nH value = 1.0509e+22
[Fri Oct 21 11:27:56 2011] Spectral fit parameter PhoIndex value = 4.4496
[Fri Oct 21 11:27:56 2011] Failed to get F(0.3-8.0) from acisf10953/analysis//spectral/fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Oct 21 11:27:56 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 11:27:56 2011] Using Nh = 1.1e+22, photon index=4.45, rate=0.0174, arf fullrun_ccd3_acisf10953_pi14-548_pass1_cl_src1.arf
[Fri Oct 21 11:27:56 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 11:27:56 2011] Updating source flux to 1.5e-13