[Fri Oct 21 11:15:24 2011] Detection parameters:
  Position = (951.1, 636.0) = 20 32 29.17 41 14 54.7
  Extent = 0.6" x 0.5", rotation angle = 107 degrees
  Source counts = 12.5 +/- 3.7
  Background counts = 1.5
  Rate = 0.0004 +/- 0.0001

[Fri Oct 21 11:15:26 2011] Off-axis axis estimate = 4.65'
[Fri Oct 21 11:16:56 2011] Using EEF radius (= 1.05 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 11:16:56 2011] Initial guess for spatial extent in simple fitting = 1.05"
[Fri Oct 21 11:16:56 2011] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.303
[Fri Oct 21 11:16:56 2011] Giving source the simple spatial ID 32 for pass 0, mean size = 1.05"
[Fri Oct 21 11:16:58 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src32.ximg exists
[Fri Oct 21 11:16:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src32.csv
[Fri Oct 21 11:16:58 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src32_1.ximg exists
[Fri Oct 21 11:16:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src32.csv
[Fri Oct 21 11:16:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 11:16:59 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass0_tfrozen_src32.ximg exists
[Fri Oct 21 11:16:59 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass0_tfrozen_src32_1.ximg exists
[Fri Oct 21 11:16:59 2011] Fit fullrun_ccd2_acisf10953_pi14-548_cl_pass0_tfrozen_src32 appears to have run properly
[Fri Oct 21 11:17:22 2011] Spatial fit model total counts = 16.506900, observed total counts = 17.000000
[Fri Oct 21 11:17:22 2011] Offset between fit and detection position for source 39 = 0.671474 pixels
[Fri Oct 21 11:17:22 2011] 16.286800 total counts/ 2.683900 bgd. counts: snr = 8.303254
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.671474 pixels
  Position = (951.6, 636.4) = 20 32 29.17 41 14 54.6
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 13.6 +/- 4.0
  Background counts = 2.7
  Rate = 0.0005 +/- 0.0001
[Fri Oct 21 11:17:22 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 11:17:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 11:17:22 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 11:17:22 2011] Source does appear to be extended
[Fri Oct 21 11:17:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 11:17:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 11:17:56 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Fri Oct 21 11:17:56 2011] source mask rpix=1.4, npix_max = 14, mask sum = 9, frac = 0.632
[Fri Oct 21 11:17:56 2011] Giving source the simple spatial ID 31 for pass 1, mean size = 0.68"
[Fri Oct 21 11:17:58 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src31.ximg exists
[Fri Oct 21 11:17:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src31.csv
[Fri Oct 21 11:17:58 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src31_1.ximg exists
[Fri Oct 21 11:17:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src31.csv
[Fri Oct 21 11:17:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 11:17:59 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass1_tfrozen_src31.ximg exists
[Fri Oct 21 11:17:59 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass1_tfrozen_src31_1.ximg exists
[Fri Oct 21 11:17:59 2011] Fit fullrun_ccd2_acisf10953_pi14-548_cl_pass1_tfrozen_src31 appears to have run properly
[Fri Oct 21 11:18:20 2011] Spatial fit model total counts = 16.744400, observed total counts = 17.000000
[Fri Oct 21 11:18:20 2011] Offset between fit and detection position for source 39 = 0.032840 pixels
[Fri Oct 21 11:18:20 2011] 16.547960 total counts/ 3.139160 bgd. counts: snr = 7.568036
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.032840 pixels
  Position = (951.6, 636.4) = 20 32 29.17 41 14 54.6
  Extent = 0.6 (0.5-1.0)", rotation angle = 0
  Source counts = 13.4 +/- 4.1
  Background counts = 3.1
  Rate = 0.0005 +/- 0.0001
[Fri Oct 21 11:18:20 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 11:18:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 11:18:20 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 11:18:20 2011] Source does appear to be extended
[Fri Oct 21 11:18:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 11:22:27 2011] Not overwriting source region fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src39_src.reg
[Fri Oct 21 11:22:27 2011] Extracting stamp from image fullrun_ccd2_acisf10953_pi14-548_cl_sm2.00.img.gz, (923, 608) - (980, 665)
[Fri Oct 21 11:22:27 2011] Writing fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src39.gif
[Fri Oct 21 11:23:57 2011] ../../acisf10953/products/events/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src39_src.evt and ../../acisf10953/products/events/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src39_bgd.evt exist, delete to re-create
[Fri Oct 21 11:23:57 2011] Size of ../../acisf10953/products/events/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src39_src.evt.gz[events] = 14 counts
[Fri Oct 21 11:23:57 2011] Mean chipx,y = (592.57, 802.36)
[Fri Oct 21 11:23:57 2011] Mean tdetx,y = (3863.36, 3493.43)
[Fri Oct 21 11:23:57 2011] chipx,y range = (575.00-607.00, 780.00-815.00)
[Fri Oct 21 11:23:57 2011] Size of ../../acisf10953/products/events/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src39_bgd.evt.gz[events] = 29 counts
[Fri Oct 21 11:23:57 2011] ../../acisf10953/products/images/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src39_src.img and ../../acisf10953/products/images/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src39_bgd.img exist, delete to re-create
[Fri Oct 21 11:23:57 2011] ../../acisf10953/products/spectra/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src39_src.pi and ../../acisf10953/products/spectra/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src39_bgd.pi exist, delete to re-create
[Fri Oct 21 11:23:57 2011] Not generating rmf since there are only 13 counts
[Fri Oct 21 11:23:59 2011] ../../acisf10953/products/lightcurves/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src39_src.lc and ../../acisf10953/products/lightcurves/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src39_bgd.lc exist, delete to re-create
[Fri Oct 21 11:24:50 2011] 184.669
[Fri Oct 21 11:26:51 2011] Updating aperture counts using extracted products
[Fri Oct 21 11:26:51 2011] Error reading totcts from fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src39_src.pi.gz
[Fri Oct 21 11:26:52 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 11:26:52 2011] Using photon index=1.80, rate=0.000464, arf fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src39.arf
[Fri Oct 21 11:26:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 11:26:52 2011] Updating source flux to 7.6e-15
[Fri Oct 21 11:27:18 2011] Source 39 has fewer than 100.000000 counts, skipping spectral fitting