[Fri Oct 21 11:15:23 2011] Detection parameters:
  Position = (912.7, 96.7) = 20 32 30.84 41 10 29.3
  Extent = 0.6" x 0.5", rotation angle = 104 degrees
  Source counts = 16.7 +/- 4.2
  Background counts = 1.3
  Rate = 0.0006 +/- 0.0001

[Fri Oct 21 11:15:26 2011] Off-axis axis estimate = 0.77'
[Fri Oct 21 11:16:56 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 11:16:56 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Oct 21 11:16:56 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.378
[Fri Oct 21 11:16:56 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 0.38"
[Fri Oct 21 11:16:58 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src27.ximg exists
[Fri Oct 21 11:16:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src27.csv
[Fri Oct 21 11:16:58 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src27_1.ximg exists
[Fri Oct 21 11:16:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src27.csv
[Fri Oct 21 11:16:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 11:16:59 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Fri Oct 21 11:16:59 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Oct 21 11:16:59 2011] Fit fullrun_ccd2_acisf10953_pi14-548_cl_pass0_tfrozen_src27 appears to have run properly
[Fri Oct 21 11:17:22 2011] Spatial fit model total counts = 25.919500, observed total counts = 26.000000
[Fri Oct 21 11:17:22 2011] Offset between fit and detection position for source 19 = 0.848510 pixels
[Fri Oct 21 11:17:22 2011] 26.896000 total counts/ 12.573700 bgd. counts: snr = 4.039069
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.848510 pixels
  Position = (913.3, 97.3) = 20 32 30.84 41 10 29.4
  Extent = 0.4 (0.2-0.5)", rotation angle = 0
  Source counts = 14.3 +/- 5.2
  Background counts = 12.6
  Rate = 0.0005 +/- 0.0002
[Fri Oct 21 11:17:22 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 11:17:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 11:17:22 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 11:17:22 2011] Source does appear to be extended
[Fri Oct 21 11:17:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 11:17:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 11:17:56 2011] Initial guess for spatial extent in simple fitting = 0.36"
[Fri Oct 21 11:17:56 2011] source mask rpix=0.7, npix_max = 5, mask sum = 6, frac = 1.002
[Fri Oct 21 11:17:56 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 0.36"
[Fri Oct 21 11:17:58 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src26.ximg exists
[Fri Oct 21 11:17:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src26.csv
[Fri Oct 21 11:17:58 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src26_1.ximg exists
[Fri Oct 21 11:17:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src26.csv
[Fri Oct 21 11:17:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 11:17:59 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass1_tfrozen_src26.ximg exists
[Fri Oct 21 11:17:59 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass1_tfrozen_src26_1.ximg exists
[Fri Oct 21 11:17:59 2011] Fit fullrun_ccd2_acisf10953_pi14-548_cl_pass1_tfrozen_src26 appears to have run properly
[Fri Oct 21 11:18:20 2011] Spatial fit model total counts = 24.160000, observed total counts = 26.000000
[Fri Oct 21 11:18:20 2011] Offset between fit and detection position for source 19 = 0.045427 pixels
[Fri Oct 21 11:18:20 2011] 25.551400 total counts/ 11.166000 bgd. counts: snr = 4.305000
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.045427 pixels
  Position = (913.2, 97.3) = 20 32 30.84 41 10 29.4
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 14.4 +/- 5.1
  Background counts = 11.2
  Rate = 0.0005 +/- 0.0002
[Fri Oct 21 11:18:20 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 11:18:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 11:18:20 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 11:18:20 2011] Source does appear to be extended
[Fri Oct 21 11:18:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 11:22:27 2011] Not overwriting source region fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src19_src.reg
[Fri Oct 21 11:22:27 2011] Extracting stamp from image fullrun_ccd2_acisf10953_pi14-548_cl_sm2.00.img.gz, (896, 80) - (930, 114)
[Fri Oct 21 11:22:27 2011] Writing fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src19.gif
[Fri Oct 21 11:23:44 2011] ../../acisf10953/products/events/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src19_src.evt and ../../acisf10953/products/events/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src19_bgd.evt exist, delete to re-create
[Fri Oct 21 11:23:44 2011] Size of ../../acisf10953/products/events/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src19_src.evt.gz[events] = 16 counts
[Fri Oct 21 11:23:44 2011] Mean chipx,y = (70.88, 953.06)
[Fri Oct 21 11:23:44 2011] Mean tdetx,y = (4014.06, 4015.12)
[Fri Oct 21 11:23:44 2011] chipx,y range = (56.00-90.00, 936.00-968.00)
[Fri Oct 21 11:23:44 2011] Size of ../../acisf10953/products/events/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 12 counts
[Fri Oct 21 11:23:44 2011] ../../acisf10953/products/images/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src19_src.img and ../../acisf10953/products/images/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src19_bgd.img exist, delete to re-create
[Fri Oct 21 11:23:44 2011] ../../acisf10953/products/spectra/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src19_src.pi and ../../acisf10953/products/spectra/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src19_bgd.pi exist, delete to re-create
[Fri Oct 21 11:23:44 2011] Not generating rmf since there are only 14 counts
[Fri Oct 21 11:23:46 2011] ../../acisf10953/products/lightcurves/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src19_src.lc and ../../acisf10953/products/lightcurves/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src19_bgd.lc exist, delete to re-create
[Fri Oct 21 11:24:50 2011] 201.525
[Fri Oct 21 11:26:51 2011] Updating aperture counts using extracted products
[Fri Oct 21 11:26:51 2011] Error reading totcts from fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src19_src.pi.gz
[Fri Oct 21 11:26:52 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 11:26:52 2011] Using photon index=1.80, rate=0.000498, arf fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src19.arf
[Fri Oct 21 11:26:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 11:26:52 2011] Updating source flux to 7.6e-15
[Fri Oct 21 11:27:18 2011] Source 19 has fewer than 100.000000 counts, skipping spectral fitting