[Fri Oct 21 11:15:23 2011] Detection parameters:
  Position = (713.6, 185.3) = 20 32 39.52 41 11 12.9
  Extent = 0.7" x 0.5", rotation angle = 33 degrees
  Source counts = 23.8 +/- 5.1
  Background counts = 2.2
  Rate = 0.0008 +/- 0.0002

[Fri Oct 21 11:15:26 2011] Off-axis axis estimate = 2.55'
[Fri Oct 21 11:16:56 2011] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 11:16:56 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Fri Oct 21 11:16:56 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.978
[Fri Oct 21 11:16:56 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 0.50"
[Fri Oct 21 11:16:58 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src17.ximg exists
[Fri Oct 21 11:16:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src17.csv
[Fri Oct 21 11:16:58 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src17_1.ximg exists
[Fri Oct 21 11:16:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src17.csv
[Fri Oct 21 11:16:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 11:16:58 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Fri Oct 21 11:16:58 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Oct 21 11:16:58 2011] Fit fullrun_ccd2_acisf10953_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Fri Oct 21 11:17:22 2011] Spatial fit model total counts = 30.998800, observed total counts = 31.000000
[Fri Oct 21 11:17:22 2011] Offset between fit and detection position for source 18 = 0.635418 pixels
[Fri Oct 21 11:17:22 2011] 31.122000 total counts/ 10.109100 bgd. counts: snr = 6.608909
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.635418 pixels
  Position = (714.0, 185.7) = 20 32 39.52 41 11 12.9
  Extent = 0.6 (0.3-0.9)", rotation angle = 0
  Source counts = 21.0 +/- 5.6
  Background counts = 10.1
  Rate = 0.0007 +/- 0.0002
[Fri Oct 21 11:17:22 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 11:17:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 11:17:22 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 11:17:22 2011] Source does appear to be extended
[Fri Oct 21 11:17:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 11:17:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 11:17:56 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Fri Oct 21 11:17:56 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.056
[Fri Oct 21 11:17:56 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 0.58"
[Fri Oct 21 11:17:57 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src17.ximg exists
[Fri Oct 21 11:17:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src17.csv
[Fri Oct 21 11:17:57 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src17_1.ximg exists
[Fri Oct 21 11:17:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src17.csv
[Fri Oct 21 11:17:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 11:17:59 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Fri Oct 21 11:17:59 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Oct 21 11:17:59 2011] Fit fullrun_ccd2_acisf10953_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Oct 21 11:18:20 2011] Spatial fit model total counts = 30.407800, observed total counts = 31.000000
[Fri Oct 21 11:18:20 2011] Offset between fit and detection position for source 18 = 0.245981 pixels
[Fri Oct 21 11:18:20 2011] 29.722970 total counts/ 6.313870 bgd. counts: snr = 9.316159
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.245981 pixels
  Position = (714.2, 185.9) = 20 32 39.51 41 11 13.0
  Extent = 0.7 (0.3-1.0)", rotation angle = 0
  Source counts = 23.4 +/- 5.5
  Background counts = 6.3
  Rate = 0.0008 +/- 0.0002
[Fri Oct 21 11:18:20 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 11:18:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 11:18:20 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 11:18:20 2011] Source does appear to be extended
[Fri Oct 21 11:18:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 11:22:26 2011] Not overwriting source region fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src18_src.reg
[Fri Oct 21 11:22:26 2011] Extracting stamp from image fullrun_ccd2_acisf10953_pi14-548_cl_sm2.00.img.gz, (681, 153) - (747, 219)
[Fri Oct 21 11:22:26 2011] Writing fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src18.gif
[Fri Oct 21 11:23:15 2011] ../../acisf10953/products/events/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src18_src.evt and ../../acisf10953/products/events/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src18_bgd.evt exist, delete to re-create
[Fri Oct 21 11:23:15 2011] Size of ../../acisf10953/products/events/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src18_src.evt.gz[events] = 27 counts
[Fri Oct 21 11:23:15 2011] Mean chipx,y = (80.96, 731.56)
[Fri Oct 21 11:23:15 2011] Mean tdetx,y = (3792.56, 4005.04)
[Fri Oct 21 11:23:15 2011] chipx,y range = (68.00-102.00, 714.00-751.00)
[Fri Oct 21 11:23:15 2011] Size of ../../acisf10953/products/events/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 23 counts
[Fri Oct 21 11:23:15 2011] ../../acisf10953/products/images/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src18_src.img and ../../acisf10953/products/images/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src18_bgd.img exist, delete to re-create
[Fri Oct 21 11:23:15 2011] ../../acisf10953/products/spectra/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src18_src.pi and ../../acisf10953/products/spectra/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src18_bgd.pi exist, delete to re-create
[Fri Oct 21 11:23:15 2011] Not generating rmf since there are only 23 counts
[Fri Oct 21 11:23:17 2011] ../../acisf10953/products/lightcurves/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src18_src.lc and ../../acisf10953/products/lightcurves/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src18_bgd.lc exist, delete to re-create
[Fri Oct 21 11:24:49 2011] 200.862
[Fri Oct 21 11:26:51 2011] Updating aperture counts using extracted products
[Fri Oct 21 11:26:51 2011] Error reading totcts from fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src18_src.pi.gz
[Fri Oct 21 11:26:52 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 11:26:52 2011] Using photon index=1.80, rate=0.00081, arf fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src18.arf
[Fri Oct 21 11:26:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 11:26:52 2011] Updating source flux to 1.2e-14
[Fri Oct 21 11:27:18 2011] Source 18 has fewer than 100.000000 counts, skipping spectral fitting