[Fri Oct 21 11:15:23 2011] Detection parameters:
  Position = (829.3, 271.5) = 20 32 34.48 41 11 55.3
  Extent = 0.6" x 0.5", rotation angle = 153 degrees
  Source counts = 25.3 +/- 5.2
  Background counts = 1.7
  Rate = 0.0009 +/- 0.0002

[Fri Oct 21 11:15:26 2011] Off-axis axis estimate = 2.18'
[Fri Oct 21 11:16:56 2011] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 11:16:56 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Fri Oct 21 11:16:56 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.127
[Fri Oct 21 11:16:56 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 0.45"
[Fri Oct 21 11:16:58 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src15.ximg exists
[Fri Oct 21 11:16:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src15.csv
[Fri Oct 21 11:16:58 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src15_1.ximg exists
[Fri Oct 21 11:16:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src15.csv
[Fri Oct 21 11:16:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 11:16:58 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Fri Oct 21 11:16:58 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Oct 21 11:16:58 2011] Fit fullrun_ccd2_acisf10953_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Fri Oct 21 11:17:22 2011] Spatial fit model total counts = 30.048200, observed total counts = 31.000000
[Fri Oct 21 11:17:22 2011] Offset between fit and detection position for source 16 = 0.945806 pixels
[Fri Oct 21 11:17:22 2011] 29.128940 total counts/ 5.494140 bgd. counts: snr = 10.083286
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.945806 pixels
  Position = (830.2, 271.8) = 20 32 34.46 41 11 55.2
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 23.6 +/- 5.4
  Background counts = 5.5
  Rate = 0.0008 +/- 0.0002
[Fri Oct 21 11:17:22 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 11:17:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 11:17:22 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 11:17:22 2011] Source does appear to be extended
[Fri Oct 21 11:17:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 11:17:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 11:17:56 2011] Initial guess for spatial extent in simple fitting = 0.48"
[Fri Oct 21 11:17:56 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.044
[Fri Oct 21 11:17:56 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.48"
[Fri Oct 21 11:17:57 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src15.ximg exists
[Fri Oct 21 11:17:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src15.csv
[Fri Oct 21 11:17:57 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src15_1.ximg exists
[Fri Oct 21 11:17:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src15.csv
[Fri Oct 21 11:17:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 11:17:59 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Fri Oct 21 11:17:59 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Fri Oct 21 11:17:59 2011] Fit fullrun_ccd2_acisf10953_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Fri Oct 21 11:18:20 2011] Spatial fit model total counts = 28.443300, observed total counts = 31.000000
[Fri Oct 21 11:18:20 2011] Offset between fit and detection position for source 16 = 0.015765 pixels
[Fri Oct 21 11:18:20 2011] 27.194950 total counts/ 3.955750 bgd. counts: snr = 11.684409
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.015765 pixels
  Position = (830.2, 271.8) = 20 32 34.46 41 11 55.2
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 23.2 +/- 5.2
  Background counts = 4.0
  Rate = 0.0008 +/- 0.0002
[Fri Oct 21 11:18:20 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 11:18:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 11:18:20 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 11:18:20 2011] Source does appear to be extended
[Fri Oct 21 11:18:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 11:22:26 2011] Not overwriting source region fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src16_src.reg
[Fri Oct 21 11:22:26 2011] Extracting stamp from image fullrun_ccd2_acisf10953_pi14-548_cl_sm2.00.img.gz, (808, 249) - (853, 294)
[Fri Oct 21 11:22:26 2011] Writing fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src16.gif
[Fri Oct 21 11:23:09 2011] ../../acisf10953/products/events/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src16_src.evt and ../../acisf10953/products/events/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src16_bgd.evt exist, delete to re-create
[Fri Oct 21 11:23:09 2011] Size of ../../acisf10953/products/events/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src16_src.evt.gz[events] = 25 counts
[Fri Oct 21 11:23:09 2011] Mean chipx,y = (206.16, 813.48)
[Fri Oct 21 11:23:09 2011] Mean tdetx,y = (3874.48, 3879.84)
[Fri Oct 21 11:23:09 2011] chipx,y range = (190.00-224.00, 793.00-828.00)
[Fri Oct 21 11:23:09 2011] Size of ../../acisf10953/products/events/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 9 counts
[Fri Oct 21 11:23:09 2011] ../../acisf10953/products/images/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src16_src.img and ../../acisf10953/products/images/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src16_bgd.img exist, delete to re-create
[Fri Oct 21 11:23:09 2011] ../../acisf10953/products/spectra/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src16_src.pi and ../../acisf10953/products/spectra/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src16_bgd.pi exist, delete to re-create
[Fri Oct 21 11:23:09 2011] Not generating rmf since there are only 23 counts
[Fri Oct 21 11:23:12 2011] ../../acisf10953/products/lightcurves/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src16_src.lc and ../../acisf10953/products/lightcurves/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src16_bgd.lc exist, delete to re-create
[Fri Oct 21 11:24:49 2011] 201.266
[Fri Oct 21 11:26:51 2011] Updating aperture counts using extracted products
[Fri Oct 21 11:26:51 2011] Error reading totcts from fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src16_src.pi.gz
[Fri Oct 21 11:26:52 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 11:26:52 2011] Using photon index=1.80, rate=0.000805, arf fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src16.arf
[Fri Oct 21 11:26:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 11:26:52 2011] Updating source flux to 1.2e-14
[Fri Oct 21 11:27:18 2011] Source 16 has fewer than 100.000000 counts, skipping spectral fitting