[Fri Oct 21 11:15:22 2011] Detection parameters:
  Position = (1052.8, 828.8) = 20 32 24.73 41 16 29.5
  Extent = 1.8" x 1.0", rotation angle = 171 degrees
  Source counts = 32.3 +/- 6.2
  Background counts = 6.7
  Rate = 0.001 +/- 0.0002

[Fri Oct 21 11:15:26 2011] Off-axis axis estimate = 6.23'
[Fri Oct 21 11:16:56 2011] Using EEF radius (= 1.75 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 11:16:56 2011] Initial guess for spatial extent in simple fitting = 1.75"
[Fri Oct 21 11:16:56 2011] source mask rpix=3.5, npix_max = 65, mask sum = 64, frac = 0.976
[Fri Oct 21 11:16:56 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 1.75"
[Fri Oct 21 11:16:58 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src13.ximg exists
[Fri Oct 21 11:16:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src13.csv
[Fri Oct 21 11:16:58 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src13_1.ximg exists
[Fri Oct 21 11:16:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src13.csv
[Fri Oct 21 11:16:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 11:16:58 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Fri Oct 21 11:16:58 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Oct 21 11:16:58 2011] Fit fullrun_ccd2_acisf10953_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Oct 21 11:17:22 2011] Spatial fit model total counts = 42.368600, observed total counts = 42.000000
[Fri Oct 21 11:17:22 2011] Offset between fit and detection position for source 11 = 0.935806 pixels
[Fri Oct 21 11:17:22 2011] 42.227900 total counts/ 15.235900 bgd. counts: snr = 6.915141
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.935806 pixels
  Position = (1053.2, 829.6) = 20 32 24.73 41 16 29.7
  Extent = 1.5 (1.0-2.1)", rotation angle = 0
  Source counts = 27.0 +/- 6.5
  Background counts = 15.2
  Rate = 0.0009 +/- 0.0002
[Fri Oct 21 11:17:22 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 11:17:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 11:17:22 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 11:17:22 2011] Source does appear to be extended
[Fri Oct 21 11:17:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 11:17:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 11:17:56 2011] Initial guess for spatial extent in simple fitting = 1.49"
[Fri Oct 21 11:17:56 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.985
[Fri Oct 21 11:17:56 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 1.49"
[Fri Oct 21 11:17:57 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src13.ximg exists
[Fri Oct 21 11:17:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src13.csv
[Fri Oct 21 11:17:57 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src13_1.ximg exists
[Fri Oct 21 11:17:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src13.csv
[Fri Oct 21 11:17:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 11:17:59 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Fri Oct 21 11:17:59 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Oct 21 11:17:59 2011] Fit fullrun_ccd2_acisf10953_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Oct 21 11:18:20 2011] Spatial fit model total counts = 36.266300, observed total counts = 36.000000
[Fri Oct 21 11:18:20 2011] Offset between fit and detection position for source 11 = 0.352457 pixels
[Fri Oct 21 11:18:20 2011] 36.558100 total counts/ 3.734000 bgd. counts: snr = 16.986569
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.352457 pixels
  Position = (1053.2, 829.3) = 20 32 24.73 41 16 29.5
  Extent = 1.7 (1.0-2.2)", rotation angle = 0
  Source counts = 32.8 +/- 6.0
  Background counts = 3.7
  Rate = 0.001 +/- 0.0002
[Fri Oct 21 11:18:20 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 11:18:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 11:18:20 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 11:18:20 2011] Source does appear to be extended
[Fri Oct 21 11:18:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 11:22:26 2011] Not overwriting source region fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src11_src.reg
[Fri Oct 21 11:22:26 2011] Extracting stamp from image fullrun_ccd2_acisf10953_pi14-548_cl_sm2.00.img.gz, (977, 753) - (1129, 905)
[Fri Oct 21 11:22:26 2011] Writing fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src11.gif
[Fri Oct 21 11:23:04 2011] ../../acisf10953/products/events/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src11_src.evt and ../../acisf10953/products/events/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Fri Oct 21 11:23:04 2011] Size of ../../acisf10953/products/events/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src11_src.evt.gz[events] = 47 counts
[Fri Oct 21 11:23:04 2011] Mean chipx,y = (808.21, 824.47)
[Fri Oct 21 11:23:04 2011] Mean tdetx,y = (3885.47, 3277.79)
[Fri Oct 21 11:23:04 2011] chipx,y range = (782.00-839.00, 804.00-849.00)
[Fri Oct 21 11:23:04 2011] Size of ../../acisf10953/products/events/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 103 counts
[Fri Oct 21 11:23:04 2011] ../../acisf10953/products/images/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src11_src.img and ../../acisf10953/products/images/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Fri Oct 21 11:23:04 2011] ../../acisf10953/products/spectra/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src11_src.pi and ../../acisf10953/products/spectra/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Fri Oct 21 11:23:04 2011] Not generating rmf since there are only 32 counts
[Fri Oct 21 11:23:07 2011] ../../acisf10953/products/lightcurves/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src11_src.lc and ../../acisf10953/products/lightcurves/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Fri Oct 21 11:24:49 2011] 175.071
[Fri Oct 21 11:26:51 2011] Updating aperture counts using extracted products
[Fri Oct 21 11:26:51 2011] Error reading totcts from fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src11_src.pi.gz
[Fri Oct 21 11:26:52 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 11:26:52 2011] Using photon index=1.80, rate=0.00114, arf fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src11.arf
[Fri Oct 21 11:26:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 11:26:52 2011] Updating source flux to 2e-14
[Fri Oct 21 11:27:18 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting