[Fri Oct 21 11:15:22 2011] Detection parameters:
  Position = (681.2, 750.3) = 20 32 40.94 41 15 50.9
  Extent = 2.4" x 1.3", rotation angle = 175 degrees
  Source counts = 52.8 +/- 8.0
  Background counts = 11.2
  Rate = 0.002 +/- 0.0003

[Fri Oct 21 11:15:26 2011] Off-axis axis estimate = 6.16'
[Fri Oct 21 11:16:56 2011] Using EEF radius (= 1.71 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 11:16:56 2011] Initial guess for spatial extent in simple fitting = 1.71"
[Fri Oct 21 11:16:56 2011] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.009
[Fri Oct 21 11:16:56 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 1.71"
[Fri Oct 21 11:16:57 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src8.ximg exists
[Fri Oct 21 11:16:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src8.csv
[Fri Oct 21 11:16:57 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src8_1.ximg exists
[Fri Oct 21 11:16:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src8.csv
[Fri Oct 21 11:16:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10953_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 11:16:58 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Fri Oct 21 11:16:58 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Oct 21 11:16:58 2011] Fit fullrun_ccd2_acisf10953_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Fri Oct 21 11:17:22 2011] Spatial fit model total counts = 57.062600, observed total counts = 57.000000
[Fri Oct 21 11:17:22 2011] Offset between fit and detection position for source 10 = 2.062935 pixels
[Fri Oct 21 11:17:22 2011] 56.250300 total counts/ 13.181800 bgd. counts: snr = 11.862395
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 2.062935 pixels
  Position = (682.7, 751.8) = 20 32 40.90 41 15 51.4
  Extent = 1.7 (1.1-2.4)", rotation angle = 0
  Source counts = 43.1 +/- 7.5
  Background counts = 13.2
  Rate = 0.001 +/- 0.0003
[Fri Oct 21 11:17:22 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 11:17:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 11:17:22 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 11:17:22 2011] Source does appear to be extended
[Fri Oct 21 11:17:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 11:17:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 11:17:56 2011] Initial guess for spatial extent in simple fitting = 1.68"
[Fri Oct 21 11:17:56 2011] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.039
[Fri Oct 21 11:17:56 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 1.68"
[Fri Oct 21 11:17:57 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src8.ximg exists
[Fri Oct 21 11:17:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src8.csv
[Fri Oct 21 11:17:57 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src8_1.ximg exists
[Fri Oct 21 11:17:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src8.csv
[Fri Oct 21 11:17:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10953_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 11:17:58 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Fri Oct 21 11:17:58 2011] fullrun_ccd2_acisf10953_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Oct 21 11:17:58 2011] Fit fullrun_ccd2_acisf10953_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Fri Oct 21 11:18:20 2011] Spatial fit model total counts = 55.460600, observed total counts = 56.000000
[Fri Oct 21 11:18:20 2011] Offset between fit and detection position for source 10 = 1.168070 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.168070 pixels
  Position = (681.5, 752.0) = 20 32 40.95 41 15 51.4
  Extent = 2.0 (1.3-2.4)", rotation angle = 0
  Source counts = 55.2 +/- 7.4
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Fri Oct 21 11:18:20 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 11:18:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 11:18:20 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 11:18:20 2011] Source does appear to be extended
[Fri Oct 21 11:18:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 11:22:26 2011] Not overwriting source region fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src10_src.reg
[Fri Oct 21 11:22:26 2011] Extracting stamp from image fullrun_ccd2_acisf10953_pi14-548_cl_sm2.00.img.gz, (590, 660) - (773, 844)
[Fri Oct 21 11:22:26 2011] Writing fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src10.gif
[Fri Oct 21 11:22:51 2011] ../../acisf10953/products/events/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src10_src.evt and ../../acisf10953/products/events/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Fri Oct 21 11:22:51 2011] Size of ../../acisf10953/products/events/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src10_src.evt.gz[events] = 68 counts
[Fri Oct 21 11:22:51 2011] Mean chipx,y = (603.74, 501.38)
[Fri Oct 21 11:22:51 2011] Mean tdetx,y = (3562.38, 3482.26)
[Fri Oct 21 11:22:51 2011] chipx,y range = (577.00-626.00, 475.00-528.00)
[Fri Oct 21 11:22:51 2011] Size of ../../acisf10953/products/events/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 170 counts
[Fri Oct 21 11:22:51 2011] ../../acisf10953/products/images/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src10_src.img and ../../acisf10953/products/images/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Fri Oct 21 11:22:51 2011] ../../acisf10953/products/spectra/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src10_src.pi and ../../acisf10953/products/spectra/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Fri Oct 21 11:22:51 2011] Not generating rmf since there are only 55 counts
[Fri Oct 21 11:22:54 2011] ../../acisf10953/products/lightcurves/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src10_src.lc and ../../acisf10953/products/lightcurves/fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Fri Oct 21 11:24:49 2011] 179.256
[Fri Oct 21 11:26:51 2011] Updating aperture counts using extracted products
[Fri Oct 21 11:26:51 2011] Error reading totcts from fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src10_src.pi.gz
[Fri Oct 21 11:26:51 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 11:26:51 2011] Using photon index=1.80, rate=0.00191, arf fullrun_ccd2_acisf10953_pi14-548_pass1_cl_src10.arf
[Fri Oct 21 11:26:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 11:26:51 2011] Updating source flux to 3.2e-14
[Fri Oct 21 11:27:18 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting