[Fri Oct 21 11:15:20 2011] Detection parameters:
  Position = (413.3, 1055.8) = 20 32 26.76 41 7 17.5
  Extent = 0.5" x 0.5", rotation angle = 19 degrees
  Source counts = 20.2 +/- 4.7
  Background counts = 1.8
  Rate = 0.0007 +/- 0.0002

[Fri Oct 21 11:15:21 2011] Off-axis axis estimate = 2.99'
[Fri Oct 21 11:16:54 2011] Using EEF radius (= 0.58 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 11:16:54 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Fri Oct 21 11:16:54 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.803
[Fri Oct 21 11:16:54 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.58"
[Fri Oct 21 11:16:55 2011] fullrun_ccd1_acisf10953_pi14-548_cl_pass0_src10.ximg exists
[Fri Oct 21 11:16:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10953_pi14-548_cl_pass0_src10.csv
[Fri Oct 21 11:16:55 2011] fullrun_ccd1_acisf10953_pi14-548_cl_pass0_src10_1.ximg exists
[Fri Oct 21 11:16:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10953_pi14-548_cl_pass0_src10.csv
[Fri Oct 21 11:16:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10953_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10953_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 11:16:56 2011] fullrun_ccd1_acisf10953_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Fri Oct 21 11:16:56 2011] fullrun_ccd1_acisf10953_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Oct 21 11:16:56 2011] Fit fullrun_ccd1_acisf10953_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Oct 21 11:17:17 2011] Spatial fit model total counts = 29.996200, observed total counts = 30.000000
[Fri Oct 21 11:17:17 2011] Offset between fit and detection position for source 11 = 0.551209 pixels
[Fri Oct 21 11:17:17 2011] 30.193500 total counts/ 10.284200 bgd. counts: snr = 6.208272
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.551209 pixels
  Position = (413.5, 1056.3) = 20 32 26.77 41 7 17.5
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 19.9 +/- 5.5
  Background counts = 10.3
  Rate = 0.0007 +/- 0.0002
[Fri Oct 21 11:17:17 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 11:17:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 11:17:17 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 11:17:17 2011] Source does appear to be extended
[Fri Oct 21 11:17:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 11:17:55 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 11:17:55 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Fri Oct 21 11:17:55 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.050
[Fri Oct 21 11:17:55 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.47"
[Fri Oct 21 11:17:55 2011] fullrun_ccd1_acisf10953_pi14-548_cl_pass1_src10.ximg exists
[Fri Oct 21 11:17:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10953_pi14-548_cl_pass1_src10.csv
[Fri Oct 21 11:17:55 2011] fullrun_ccd1_acisf10953_pi14-548_cl_pass1_src10_1.ximg exists
[Fri Oct 21 11:17:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10953_pi14-548_cl_pass1_src10.csv
[Fri Oct 21 11:17:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10953_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10953_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 11:17:56 2011] fullrun_ccd1_acisf10953_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Fri Oct 21 11:17:56 2011] fullrun_ccd1_acisf10953_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Oct 21 11:17:56 2011] Fit fullrun_ccd1_acisf10953_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Oct 21 11:18:14 2011] Spatial fit model total counts = 29.988600, observed total counts = 30.000000
[Fri Oct 21 11:18:14 2011] Offset between fit and detection position for source 11 = 0.001076 pixels
[Fri Oct 21 11:18:14 2011] 30.185400 total counts/ 10.280200 bgd. counts: snr = 6.208201
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.001076 pixels
  Position = (413.5, 1056.3) = 20 32 26.77 41 7 17.5
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 19.9 +/- 5.5
  Background counts = 10.3
  Rate = 0.0007 +/- 0.0002
[Fri Oct 21 11:18:14 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 11:18:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 11:18:14 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 11:18:14 2011] Source does appear to be extended
[Fri Oct 21 11:18:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 11:21:02 2011] Not overwriting source region fullrun_ccd1_acisf10953_pi14-548_pass1_cl_src11_src.reg
[Fri Oct 21 11:21:02 2011] Extracting stamp from image fullrun_ccd1_acisf10953_pi14-548_cl_sm2.00.img.gz, (392, 1035) - (435, 1078)
[Fri Oct 21 11:21:02 2011] Writing fullrun_ccd1_acisf10953_pi14-548_pass1_cl_src11.gif
[Fri Oct 21 11:21:33 2011] ../../acisf10953/products/events/fullrun_ccd1_acisf10953_pi14-548_pass1_cl_src11_src.evt and ../../acisf10953/products/events/fullrun_ccd1_acisf10953_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Fri Oct 21 11:21:33 2011] Size of ../../acisf10953/products/events/fullrun_ccd1_acisf10953_pi14-548_pass1_cl_src11_src.evt.gz[events] = 21 counts
[Fri Oct 21 11:21:33 2011] Mean chipx,y = (234.90, 894.38)
[Fri Oct 21 11:21:33 2011] Mean tdetx,y = (4237.62, 4341.90)
[Fri Oct 21 11:21:33 2011] chipx,y range = (221.00-255.00, 878.00-911.00)
[Fri Oct 21 11:21:33 2011] Size of ../../acisf10953/products/events/fullrun_ccd1_acisf10953_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 19 counts
[Fri Oct 21 11:21:33 2011] ../../acisf10953/products/images/fullrun_ccd1_acisf10953_pi14-548_pass1_cl_src11_src.img and ../../acisf10953/products/images/fullrun_ccd1_acisf10953_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Fri Oct 21 11:21:33 2011] ../../acisf10953/products/spectra/fullrun_ccd1_acisf10953_pi14-548_pass1_cl_src11_src.pi and ../../acisf10953/products/spectra/fullrun_ccd1_acisf10953_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Fri Oct 21 11:21:33 2011] Not generating rmf since there are only 19 counts
[Fri Oct 21 11:21:35 2011] ../../acisf10953/products/lightcurves/fullrun_ccd1_acisf10953_pi14-548_pass1_cl_src11_src.lc and ../../acisf10953/products/lightcurves/fullrun_ccd1_acisf10953_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Fri Oct 21 11:22:25 2011] 198.945
[Fri Oct 21 11:26:50 2011] Updating aperture counts using extracted products
[Fri Oct 21 11:26:50 2011] Error reading totcts from fullrun_ccd1_acisf10953_pi14-548_pass1_cl_src11_src.pi.gz
[Fri Oct 21 11:26:51 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 11:26:51 2011] Using photon index=1.80, rate=0.000689, arf fullrun_ccd1_acisf10953_pi14-548_pass1_cl_src11.arf
[Fri Oct 21 11:26:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 11:26:51 2011] Updating source flux to 1.1e-14
[Fri Oct 21 11:27:12 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting