[Fri Oct 21 11:15:17 2011] Detection parameters:
  Position = (214.4, 594.0) = 20 33 16.95 41 6 32.2
  Extent = 3.6" x 1.7", rotation angle = 42 degrees
  Source counts = 28.4 +/- 7.0
  Background counts = 20.6
  Rate = 0.001 +/- 0.0002

[Fri Oct 21 11:15:18 2011] Off-axis axis estimate = 10.14'
[Fri Oct 21 11:16:52 2011] Using EEF radius (= 4.56 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 11:16:52 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 11:16:52 2011] Initial guess for spatial extent in simple fitting = 4.56"
[Fri Oct 21 11:16:52 2011] source mask rpix=9.3, npix_max = 380, mask sum = 380, frac = 0.998
[Fri Oct 21 11:16:52 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 4.56"
[Fri Oct 21 11:16:53 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass0_src25.ximg exists
[Fri Oct 21 11:16:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10953_pi14-548_cl_pass0_src25.csv
[Fri Oct 21 11:16:53 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass0_src25_1.ximg exists
[Fri Oct 21 11:16:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10953_pi14-548_cl_pass0_src25.csv
[Fri Oct 21 11:16:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10953_pi14-548_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10953_pi14-548_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 11:16:54 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass0_tfrozen_src25.ximg exists
[Fri Oct 21 11:16:54 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists
[Fri Oct 21 11:16:54 2011] Fit fullrun_ccd0_acisf10953_pi14-548_cl_pass0_tfrozen_src25 appears to have run properly
[Fri Oct 21 11:17:11 2011] Spatial fit model total counts = 133.457000, observed total counts = 134.000000
[Fri Oct 21 11:17:11 2011] Offset between fit and detection position for source 37 = 1.389043 pixels
[Fri Oct 21 11:17:11 2011] 133.692900 total counts/ 107.706000 bgd. counts: snr = 2.504001
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 1.389043 pixels
  Position = (213.3, 593.2) = 20 33 17.02 41 6 31.5
  Extent = 2.1 (1.4-3.1)", rotation angle = 0
  Source counts = 26.0 +/- 11.6
  Background counts = 107.7
  Rate = 0.0009 +/- 0.0004
[Fri Oct 21 11:17:11 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 11:17:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 11:17:11 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 11:17:11 2011] Source does appear to be extended
[Fri Oct 21 11:17:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 11:17:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 11:17:52 2011] Initial guess for spatial extent in simple fitting = 2.09"
[Fri Oct 21 11:17:52 2011] source mask rpix=4.2, npix_max = 89, mask sum = 90, frac = 1.002
[Fri Oct 21 11:17:52 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 2.09"
[Fri Oct 21 11:17:53 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass1_src23.ximg exists
[Fri Oct 21 11:17:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10953_pi14-548_cl_pass1_src23.csv
[Fri Oct 21 11:17:53 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass1_src23_1.ximg exists
[Fri Oct 21 11:17:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10953_pi14-548_cl_pass1_src23.csv
[Fri Oct 21 11:17:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10953_pi14-548_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10953_pi14-548_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 11:17:54 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass1_tfrozen_src23.ximg exists
[Fri Oct 21 11:17:54 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass1_tfrozen_src23_1.ximg exists
[Fri Oct 21 11:17:54 2011] Fit fullrun_ccd0_acisf10953_pi14-548_cl_pass1_tfrozen_src23 appears to have run properly
[Fri Oct 21 11:18:12 2011] Spatial fit model total counts = 50.999700, observed total counts = 51.000000
[Fri Oct 21 11:18:12 2011] Offset between fit and detection position for source 37 = 0.407023 pixels
[Fri Oct 21 11:18:12 2011] 51.406000 total counts/ 27.931100 bgd. counts: snr = 4.441807
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 0.407023 pixels
  Position = (212.9, 593.1) = 20 33 17.04 41 6 31.4
  Extent = 2.0 (1.1-3.2)", rotation angle = 0
  Source counts = 23.5 +/- 7.2
  Background counts = 27.9
  Rate = 0.0008 +/- 0.0002
[Fri Oct 21 11:18:12 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 11:18:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 11:18:12 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 11:18:12 2011] Source does appear to be extended
[Fri Oct 21 11:18:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 11:18:53 2011] Not overwriting source region fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src37_src.reg
[Fri Oct 21 11:18:53 2011] Extracting stamp from image fullrun_ccd0_acisf10953_pi14-548_cl_sm2.00.img.gz, (123, 503) - (303, 683)
[Fri Oct 21 11:18:53 2011] Writing fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src37.gif
[Fri Oct 21 11:20:21 2011] ../../acisf10953/products/events/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src37_src.evt and ../../acisf10953/products/events/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src37_bgd.evt exist, delete to re-create
[Fri Oct 21 11:20:21 2011] Size of ../../acisf10953/products/events/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src37_src.evt.gz[events] = 43 counts
[Fri Oct 21 11:20:21 2011] Mean chipx,y = (292.60, 125.47)
[Fri Oct 21 11:20:21 2011] Mean tdetx,y = (3186.47, 4839.40)
[Fri Oct 21 11:20:21 2011] chipx,y range = (264.00-321.00, 95.00-150.00)
[Fri Oct 21 11:20:21 2011] Size of ../../acisf10953/products/events/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src37_bgd.evt.gz[events] = 178 counts
[Fri Oct 21 11:20:21 2011] ../../acisf10953/products/images/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src37_src.img and ../../acisf10953/products/images/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src37_bgd.img exist, delete to re-create
[Fri Oct 21 11:20:21 2011] ../../acisf10953/products/spectra/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src37_src.pi and ../../acisf10953/products/spectra/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src37_bgd.pi exist, delete to re-create
[Fri Oct 21 11:20:21 2011] Not generating rmf since there are only 23 counts
[Fri Oct 21 11:20:24 2011] ../../acisf10953/products/lightcurves/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src37_src.lc and ../../acisf10953/products/lightcurves/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src37_bgd.lc exist, delete to re-create
[Fri Oct 21 11:21:01 2011] 159.455
[Fri Oct 21 11:26:50 2011] Updating aperture counts using extracted products
[Fri Oct 21 11:26:50 2011] Error reading totcts from fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src37_src.pi.gz
[Fri Oct 21 11:26:50 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 11:26:50 2011] Using photon index=1.80, rate=0.000813, arf fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src37.arf
[Fri Oct 21 11:26:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 11:26:50 2011] Updating source flux to 1.5e-14
[Fri Oct 21 11:26:58 2011] Source 37 has fewer than 100.000000 counts, skipping spectral fitting