[Fri Oct 21 11:15:17 2011] Detection parameters:
  Position = (918.4, 909.0) = 20 32 46.32 41 9 7.7
  Extent = 0.8" x 0.5", rotation angle = 168 degrees
  Source counts = 12.4 +/- 3.7
  Background counts = 1.6
  Rate = 0.0004 +/- 0.0001

[Fri Oct 21 11:15:18 2011] Off-axis axis estimate = 3.83'
[Fri Oct 21 11:16:52 2011] Using EEF radius (= 0.78 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 11:16:52 2011] Initial guess for spatial extent in simple fitting = 0.78"
[Fri Oct 21 11:16:52 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.919
[Fri Oct 21 11:16:52 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 0.78"
[Fri Oct 21 11:16:53 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass0_src18.ximg exists
[Fri Oct 21 11:16:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10953_pi14-548_cl_pass0_src18.csv
[Fri Oct 21 11:16:53 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass0_src18_1.ximg exists
[Fri Oct 21 11:16:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10953_pi14-548_cl_pass0_src18.csv
[Fri Oct 21 11:16:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10953_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10953_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 11:16:54 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Fri Oct 21 11:16:54 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Fri Oct 21 11:16:54 2011] Fit fullrun_ccd0_acisf10953_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Fri Oct 21 11:17:11 2011] Spatial fit model total counts = 22.322500, observed total counts = 24.000000
[Fri Oct 21 11:17:11 2011] Offset between fit and detection position for source 23 = 2.493886 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 2.493886 pixels
  Position = (920.2, 910.6) = 20 32 46.26 41 9 8.3
  Extent = 1.2 (0.8-1.6)", rotation angle = 0
  Source counts = 20.2 +/- 4.5
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0002
[Fri Oct 21 11:17:11 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 11:17:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 11:17:11 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 11:17:11 2011] Source does appear to be extended
[Fri Oct 21 11:17:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 11:17:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 11:17:52 2011] Initial guess for spatial extent in simple fitting = 1.22"
[Fri Oct 21 11:17:52 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.016
[Fri Oct 21 11:17:52 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 1.22"
[Fri Oct 21 11:17:53 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass1_src17.ximg exists
[Fri Oct 21 11:17:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10953_pi14-548_cl_pass1_src17.csv
[Fri Oct 21 11:17:53 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass1_src17_1.ximg exists
[Fri Oct 21 11:17:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10953_pi14-548_cl_pass1_src17.csv
[Fri Oct 21 11:17:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10953_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10953_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 11:17:54 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Fri Oct 21 11:17:54 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Oct 21 11:17:54 2011] Fit fullrun_ccd0_acisf10953_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Oct 21 11:18:12 2011] Spatial fit model total counts = 27.897100, observed total counts = 28.000000
[Fri Oct 21 11:18:12 2011] Offset between fit and detection position for source 23 = 1.236310 pixels
[Fri Oct 21 11:18:12 2011] 27.709800 total counts/ 14.002500 bgd. counts: snr = 3.663103
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 1.236310 pixels
  Position = (919.4, 909.7) = 20 32 46.29 41 9 7.8
  Extent = 1.0 (0.6-1.4)", rotation angle = 0
  Source counts = 13.7 +/- 5.3
  Background counts = 14.0
  Rate = 0.0005 +/- 0.0002
[Fri Oct 21 11:18:12 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 11:18:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 11:18:12 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 11:18:12 2011] Source does appear to be extended
[Fri Oct 21 11:18:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 11:18:53 2011] Not overwriting source region fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src23_src.reg
[Fri Oct 21 11:18:53 2011] Extracting stamp from image fullrun_ccd0_acisf10953_pi14-548_cl_sm2.00.img.gz, (876, 866) - (963, 953)
[Fri Oct 21 11:18:53 2011] Writing fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src23.gif
[Fri Oct 21 11:19:56 2011] ../../acisf10953/products/events/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src23_src.evt and ../../acisf10953/products/events/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src23_bgd.evt exist, delete to re-create
[Fri Oct 21 11:19:56 2011] Size of ../../acisf10953/products/events/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src23_src.evt.gz[events] = 19 counts
[Fri Oct 21 11:19:56 2011] Mean chipx,y = (833.63, 675.21)
[Fri Oct 21 11:19:56 2011] Mean tdetx,y = (3736.21, 4298.37)
[Fri Oct 21 11:19:56 2011] chipx,y range = (819.00-855.00, 657.00-696.00)
[Fri Oct 21 11:19:56 2011] Size of ../../acisf10953/products/events/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 57 counts
[Fri Oct 21 11:19:56 2011] ../../acisf10953/products/images/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src23_src.img and ../../acisf10953/products/images/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src23_bgd.img exist, delete to re-create
[Fri Oct 21 11:19:56 2011] ../../acisf10953/products/spectra/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src23_src.pi and ../../acisf10953/products/spectra/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src23_bgd.pi exist, delete to re-create
[Fri Oct 21 11:19:56 2011] Not generating rmf since there are only 13 counts
[Fri Oct 21 11:19:59 2011] ../../acisf10953/products/lightcurves/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src23_src.lc and ../../acisf10953/products/lightcurves/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src23_bgd.lc exist, delete to re-create
[Fri Oct 21 11:21:01 2011] 195.082
[Fri Oct 21 11:26:50 2011] Updating aperture counts using extracted products
[Fri Oct 21 11:26:50 2011] Error reading totcts from fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src23_src.pi.gz
[Fri Oct 21 11:26:50 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 11:26:50 2011] Using photon index=1.80, rate=0.000475, arf fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src23.arf
[Fri Oct 21 11:26:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 11:26:50 2011] Updating source flux to 7.4e-15
[Fri Oct 21 11:26:58 2011] Source 23 has fewer than 100.000000 counts, skipping spectral fitting