[Fri Oct 21 11:15:16 2011] Detection parameters:
  Position = (374.3, 1018.6) = 20 33 10.02 41 10 1.2
  Extent = 1.1" x 0.8", rotation angle = 20 degrees
  Source counts = 63.0 +/- 8.6
  Background counts = 11.0
  Rate = 0.002 +/- 0.0003

[Fri Oct 21 11:15:18 2011] Off-axis axis estimate = 8.12'
[Fri Oct 21 11:16:52 2011] Using EEF radius (= 2.91 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 11:16:52 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 11:16:52 2011] Initial guess for spatial extent in simple fitting = 2.91"
[Fri Oct 21 11:16:52 2011] source mask rpix=5.9, npix_max = 165, mask sum = 169, frac = 1.024
[Fri Oct 21 11:16:52 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 2.91"
[Fri Oct 21 11:16:53 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass0_src9.ximg exists
[Fri Oct 21 11:16:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10953_pi14-548_cl_pass0_src9.csv
[Fri Oct 21 11:16:53 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass0_src9_1.ximg exists
[Fri Oct 21 11:16:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10953_pi14-548_cl_pass0_src9.csv
[Fri Oct 21 11:16:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10953_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10953_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 11:16:54 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Fri Oct 21 11:16:54 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Oct 21 11:16:54 2011] Fit fullrun_ccd0_acisf10953_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Oct 21 11:17:11 2011] Spatial fit model total counts = 102.631000, observed total counts = 105.000000
[Fri Oct 21 11:17:11 2011] Offset between fit and detection position for source 12 = 0.409428 pixels
[Fri Oct 21 11:17:11 2011] 102.728900 total counts/ 36.386500 bgd. counts: snr = 10.998185
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.409428 pixels
  Position = (374.0, 1018.3) = 20 33 10.06 41 10 0.9
  Extent = 2.5 (1.9-3.0)", rotation angle = 0
  Source counts = 66.3 +/- 10.1
  Background counts = 36.4
  Rate = 0.002 +/- 0.0004
[Fri Oct 21 11:17:11 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 11:17:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 11:17:11 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 11:17:11 2011] Source does appear to be extended
[Fri Oct 21 11:17:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 11:17:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 11:17:52 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 11:17:52 2011] Initial guess for spatial extent in simple fitting = 2.50"
[Fri Oct 21 11:17:52 2011] source mask rpix=5.1, npix_max = 124, mask sum = 132, frac = 1.060
[Fri Oct 21 11:17:52 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 2.50"
[Fri Oct 21 11:17:53 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass1_src8.ximg exists
[Fri Oct 21 11:17:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10953_pi14-548_cl_pass1_src8.csv
[Fri Oct 21 11:17:53 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass1_src8_1.ximg exists
[Fri Oct 21 11:17:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10953_pi14-548_cl_pass1_src8.csv
[Fri Oct 21 11:17:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10953_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10953_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 11:17:54 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Fri Oct 21 11:17:54 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Oct 21 11:17:54 2011] Fit fullrun_ccd0_acisf10953_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Fri Oct 21 11:18:12 2011] Spatial fit model total counts = 93.001800, observed total counts = 95.000000
[Fri Oct 21 11:18:12 2011] Offset between fit and detection position for source 12 = 0.372371 pixels
[Fri Oct 21 11:18:12 2011] 93.065400 total counts/ 23.909000 bgd. counts: snr = 14.143330
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.372371 pixels
  Position = (374.3, 1018.1) = 20 33 10.05 41 10 0.7
  Extent = 2.5 (2.0-3.0)", rotation angle = 0
  Source counts = 69.2 +/- 9.6
  Background counts = 23.9
  Rate = 0.002 +/- 0.0003
[Fri Oct 21 11:18:12 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 11:18:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 11:18:12 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 11:18:12 2011] Source does appear to be extended
[Fri Oct 21 11:18:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 11:18:52 2011] Not overwriting source region fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src12_src.reg
[Fri Oct 21 11:18:52 2011] Extracting stamp from image fullrun_ccd0_acisf10953_pi14-548_cl_sm2.00.img.gz, (260, 903) - (489, 1133)
[Fri Oct 21 11:18:52 2011] Writing fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src12.gif
[Fri Oct 21 11:19:28 2011] ../../acisf10953/products/events/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src12_src.evt and ../../acisf10953/products/events/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Fri Oct 21 11:19:28 2011] Size of ../../acisf10953/products/events/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src12_src.evt.gz[events] = 88 counts
[Fri Oct 21 11:19:28 2011] Mean chipx,y = (747.48, 126.50)
[Fri Oct 21 11:19:28 2011] Mean tdetx,y = (3187.50, 4384.52)
[Fri Oct 21 11:19:28 2011] chipx,y range = (714.00-779.00, 99.00-153.00)
[Fri Oct 21 11:19:28 2011] Size of ../../acisf10953/products/events/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 267 counts
[Fri Oct 21 11:19:28 2011] ../../acisf10953/products/images/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src12_src.img and ../../acisf10953/products/images/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Fri Oct 21 11:19:28 2011] ../../acisf10953/products/spectra/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src12_src.pi and ../../acisf10953/products/spectra/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Fri Oct 21 11:19:28 2011] Not generating rmf since there are only 69 counts
[Fri Oct 21 11:19:31 2011] ../../acisf10953/products/lightcurves/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src12_src.lc and ../../acisf10953/products/lightcurves/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Fri Oct 21 11:21:01 2011] 171.264
[Fri Oct 21 11:26:49 2011] Updating aperture counts using extracted products
[Fri Oct 21 11:26:49 2011] Error reading totcts from fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src12_src.pi.gz
[Fri Oct 21 11:26:50 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 11:26:50 2011] Using photon index=1.80, rate=0.00239, arf fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src12.arf
[Fri Oct 21 11:26:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 11:26:50 2011] Updating source flux to 4.1e-14
[Fri Oct 21 11:26:58 2011] Source 12 has fewer than 100.000000 counts, skipping spectral fitting