[Fri Oct 21 11:15:15 2011] Detection parameters:
  Position = (576.8, 931.0) = 20 33 1.20 41 9 18.3
  Extent = 2.1" x 1.4", rotation angle = 49 degrees
  Source counts = 211.8 +/- 15.3
  Background counts = 21.2
  Rate = 0.007 +/- 0.0005

[Fri Oct 21 11:15:18 2011] Off-axis axis estimate = 6.53'
[Fri Oct 21 11:16:52 2011] Using EEF radius (= 1.91 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 11:16:52 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 11:16:52 2011] Initial guess for spatial extent in simple fitting = 1.91"
[Fri Oct 21 11:16:52 2011] source mask rpix=3.9, npix_max = 76, mask sum = 72, frac = 0.940
[Fri Oct 21 11:16:52 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.91"
[Fri Oct 21 11:16:53 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 21 11:16:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10953_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 11:16:53 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 21 11:16:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10953_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 11:16:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10953_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10953_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 11:16:54 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 21 11:16:54 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 21 11:16:54 2011] Fit fullrun_ccd0_acisf10953_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 21 11:17:11 2011] Spatial fit model total counts = 231.623000, observed total counts = 232.000000
[Fri Oct 21 11:17:11 2011] Offset between fit and detection position for source 1 = 1.058010 pixels
[Fri Oct 21 11:17:11 2011] 231.639600 total counts/ 34.706600 bgd. counts: snr = 33.428159
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.058010 pixels
  Position = (577.3, 931.9) = 20 33 1.20 41 9 18.5
  Extent = 1.9 (1.6-2.1)", rotation angle = 0
  Source counts = 196.9 +/- 15.2
  Background counts = 34.7
  Rate = 0.007 +/- 0.0005
[Fri Oct 21 11:17:11 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 11:17:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 11:17:11 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 11:17:11 2011] Source does appear to be extended
[Fri Oct 21 11:17:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 11:17:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 11:17:52 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 11:17:52 2011] Initial guess for spatial extent in simple fitting = 1.88"
[Fri Oct 21 11:17:52 2011] source mask rpix=3.8, npix_max = 74, mask sum = 72, frac = 0.964
[Fri Oct 21 11:17:52 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.88"
[Fri Oct 21 11:17:53 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 21 11:17:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10953_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 11:17:53 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 21 11:17:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10953_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 11:17:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10953_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10953_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 11:17:54 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 21 11:17:54 2011] fullrun_ccd0_acisf10953_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 21 11:17:54 2011] Fit fullrun_ccd0_acisf10953_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 21 11:18:12 2011] Spatial fit model total counts = 231.842000, observed total counts = 232.000000
[Fri Oct 21 11:18:12 2011] Offset between fit and detection position for source 1 = 0.048336 pixels
[Fri Oct 21 11:18:12 2011] 231.709100 total counts/ 35.865100 bgd. counts: snr = 32.701995
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.048336 pixels
  Position = (577.3, 931.9) = 20 33 1.20 41 9 18.5
  Extent = 1.9 (1.6-2.1)", rotation angle = 0
  Source counts = 195.8 +/- 15.2
  Background counts = 35.9
  Rate = 0.007 +/- 0.0005
[Fri Oct 21 11:18:12 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 11:18:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 11:18:12 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 11:18:12 2011] Source does appear to be extended
[Fri Oct 21 11:18:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 11:18:52 2011] Not overwriting source region fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src1_src.reg
[Fri Oct 21 11:18:52 2011] Extracting stamp from image fullrun_ccd0_acisf10953_pi14-548_cl_sm2.00.img.gz, (492, 847) - (662, 1017)
[Fri Oct 21 11:18:52 2011] Writing fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src1.gif
[Fri Oct 21 11:18:55 2011] ../../acisf10953/products/events/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src1_src.evt and ../../acisf10953/products/events/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct 21 11:18:55 2011] Size of ../../acisf10953/products/events/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src1_src.evt.gz[events] = 225 counts
[Fri Oct 21 11:18:55 2011] Mean chipx,y = (737.69, 347.77)
[Fri Oct 21 11:18:55 2011] Mean tdetx,y = (3408.77, 4394.31)
[Fri Oct 21 11:18:55 2011] chipx,y range = (713.00-759.00, 325.00-371.00)
[Fri Oct 21 11:18:55 2011] Size of ../../acisf10953/products/events/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 148 counts
[Fri Oct 21 11:18:55 2011] ../../acisf10953/products/images/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src1_src.img and ../../acisf10953/products/images/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct 21 11:18:55 2011] ../../acisf10953/products/spectra/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src1_src.pi and ../../acisf10953/products/spectra/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct 21 11:18:58 2011] ../../acisf10953/products/lightcurves/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src1_src.lc and ../../acisf10953/products/lightcurves/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct 21 11:21:01 2011] Keeping rmf generated by specextract
[Fri Oct 21 11:21:01 2011] 181.033
[Fri Oct 21 11:26:49 2011] Updating aperture counts using extracted products
[Fri Oct 21 11:26:49 2011] Error reading totcts from fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct 21 11:26:50 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 11:26:50 2011] Using photon index=1.80, rate=0.00678, arf fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src1.arf
[Fri Oct 21 11:26:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 11:26:50 2011] Updating source flux to 1.1e-13
[Fri Oct 21 11:27:12 2011] Reading fit data from acisf10953/analysis//spectral/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src1_pl.csv
[Fri Oct 21 11:27:12 2011] Spectral fit parameter nH value = 2.14206e+22
[Fri Oct 21 11:27:12 2011] Spectral fit parameter PhoIndex value = 2.62536
[Fri Oct 21 11:27:12 2011] Failed to get F(0.3-8.0) from acisf10953/analysis//spectral/fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Oct 21 11:27:12 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 11:27:12 2011] Using Nh = 2.1e+22, photon index=2.63, rate=0.00678, arf fullrun_ccd0_acisf10953_pi14-548_pass1_cl_src1.arf
[Fri Oct 21 11:27:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 11:27:12 2011] Updating source flux to 1e-13